Dold 0053625 BA9054/010 AC1-10V UH AC/DC24-80V voltage relay Tv=0-20S
|
335,41 EUR |
|||||||||||
|
( 399,14 EUR incl. VAT ) ≈ £280.74 | ≈ $368.62 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1312788 | ||||||||||
| Mfg Part No: | 0053625 | ||||||||||
| UPC/EAN: | 4030641536251 | ||||||||||
| Weight: | 0.23 kg | ||||||||||
| Type: | BA9054/010 AC1-10V UH AC/DC24-80V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0053625:
Applications
This relay is suitable for use in industrial and railway applications where reliable voltage monitoring is required. It monitors DC and AC voltages within the measurement range of AC 1 to 10 V. Galvanic isolation between the auxiliary circuit and measurement circuit ensures safe and interference-free measurement. The maximum rated voltage is AC 1000 V and DC 900 V, with devices calibrated for sinusoidal AC voltages based on RMS value. The measurement frequency can reach up to 5 kHz, enabling use in dynamic systems.
Functions and Equipment in Detail
The device features two changeover contacts as output contacts, which can be used to control external circuits. The auxiliary voltage is supplied via AC/DC 24 to 80 V, allowing flexible integration into existing power supply systems. The switch delay of 0 to 20 seconds prevents unwanted switching operations during short-term voltage fluctuations. The pickup delay is also integrated to ensure stable response to voltage fluctuations. LED indicators signal operational readiness (green LED) and activation of the output relay (yellow LED), facilitating diagnostics during operation.
Technology Explained Simply
The relay measures the arithmetic mean of the rectified measurement voltage. For AC voltages, calibration is based on RMS value, enabling precise measurement even with non-sinusoidal voltages. The pickup threshold and hysteresis are adjusted via rotary switches, with hysteresis depending on the set value. The switch delay activates after exceeding the set threshold, allowing delayed switching to ignore short-term voltage spikes. The start-up bypass is not available in this variant, so the device becomes active immediately upon applying auxiliary voltage.
Compatibility and Accessories
The relay complies with IEC/EN 60255-1 and IEC/EN 60947-1 standards and carries UKCA and CCC certifications. It is designed for use in enclosures and has a width of 45 mm, enabling standard mounting on DIN rails. Galvanic isolation between the measurement and auxiliary circuits ensures safe and interference-free operation. The devices can also be used as undervoltage relays, with the switch delay then activating after falling below the hysteresis threshold.
Mounting and Installation
Mounting is performed in enclosures using DIN rail. The connection terminals are clearly labeled: A1 and A2 for auxiliary voltage, e and f for voltage input, and contacts 11, 12, 14 and 21, 22, 24 for the two changeover contacts. Threshold settings are adjusted via rotary switches on the front panel. The LED indicators support commissioning and maintenance by visually signaling the operational status.
Operational Advantages
Precise and reliable voltage monitoring enables early fault detection and preventive maintenance, preventing downtime and increasing productivity. Galvanic isolation and high overload capacity enhance device safety and lifespan. Clear visual indication of operational status via LEDs simplifies diagnostics and maintenance during operation. The device is designed for use in demanding industrial environments and offers high operational safety.
| Technical data | |
| 1- / 3-phase | 1 |
| Enclosure design | Switch cabinet |
| Nominal voltage max. | AC 1000 V, DC 900 V |
| Output contacts | 2 C/O contacts |
| Width | 45 mm |
| Type | BA 9054 |
| Operate delay | |
| Variant | |
| Auxiliary voltage | AC/DC 24 - 80 V |
| Contact equipping | 2 changeover contacts |
| Measuring range | AC 1 - 10 V |
| Start up delay | Without |
| Switching delay | 0 - 20 s |
| Approvals and Markings | UKCA, CCC |
| Variant | Overvoltage relay. Energized on trip. Time delay at setting value |
Questions & answers
What is the delivery time of Dold 0053625 BA9054/010 AC1-10V UH AC/DC24-80V voltage relay Tv=0-20S ?
The article Dold 0053625 BA9054/010 AC1-10V UH AC/DC24-80V voltage relay Tv=0-20S is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0053625 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0053625 BA9054/010 AC1-10V UH AC/DC24-80V voltage relay Tv=0-20S always at the best possible price. We can give you a discount of 2% on Dold 0053625 BA9054/010 AC1-10V UH AC/DC24-80V voltage relay Tv=0-20S if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0053625 BA9054/010 AC1-10V UH AC/DC24-80V voltage relay Tv=0-20S we can offer you a price of 322,83 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

