Dold 0053125 BA9053/010 AC0.5-5A AC110V 0-20S current relay
|
263,30 EUR |
|||||||||||
|
( 313,33 EUR incl. VAT ) ≈ £220.38 | ≈ $289.37 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1583554 | ||||||||||
| Mfg Part No: | 0053125 | ||||||||||
| UPC/EAN: | 4030641531256 | ||||||||||
| Weight: | 0.31 kg | ||||||||||
| Type: | BA9053/010 AC0,5-5A AC110V 0-20S | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0053125:
Applications
This relay is intended for use in industrial plants and railway applications. It monitors the current consumption of loads to detect overloads or interruptions in current flow. Early fault localization enables preventive maintenance, enhancing operational safety and securing productivity. The application is in single-phase systems, with measurement provided for both DC and AC.
Functions and Equipment in Detail
The device features 2 changeover contacts as output contacts, which are galvanically isolated from the measuring circuit. The auxiliary voltage is AC 110 V, ensuring reliable power supply for the relay. The measuring ranges are fixed at AC 0.5 to 5 A, with the devices calibrated for sinusoidal AC currents in RMS value. Measurement is performed using the arithmetic mean of the rectified measuring current. The setting of the pickup value and hysteresis is adjusted via the rotary switches on the front of the device. The hysteresis depends on the set pickup value.
Technology Explained Simply
The relay operates as an overcurrent relay, but can also be used as an undercurrent relay. The switching delay t v delays switching after exceeding the set threshold. In overcurrent relays, the delay acts after exceeding the set value. The start-up bypass is not available in this variant, meaning no one-time suppression of switching operations during inrush currents occurs. The pickup delay is active, meaning the relay does not switch immediately upon reaching the threshold, but incorporates a delay. The maximum switching delay is 20 seconds. The LED indicators signal operational readiness (green LED) and activation of the output relay (yellow LED).
Compatibility and Accessories
The relay complies with IEC/EN 60255-1 and IEC/EN 60947-1 standards. The certifications UKCA and CCC are valid for this variant. It is designed for use in enclosures and can be integrated into existing control systems. The galvanic isolation between the auxiliary circuit and measuring circuit ensures safe and interference-free signal transmission. The measuring frequency can reach up to 5 kHz, enabling application in dynamic systems.
Mounting and Installation
Mounting is performed in standard enclosures. The width of 45 mm corresponds to DIN format, allowing the device to be installed in standard enclosure modules. The terminal connections are clearly labeled: A1/A2 for auxiliary voltage, i/k for current input, and contacts 11-14 and 21-24 for the two changeover contacts. Installation requires no special tools or additional components; wiring is done directly to the terminals.
Advantages in Operation
Precise and reliable measurement enables high operational safety. The LED indicators facilitate visual monitoring of the operating status. The switching delay prevents unnecessary tripping due to short-term current peaks. Galvanic isolation protects control electronics from interference. Simple adjustment via rotary switches reduces installation time and minimizes error sources. Application in industrial and railway environments demonstrates the device’s robustness and reliability under demanding conditions.
| Technical data | |
| 1- / 3-phase | 1 |
| Enclosure design | Switch cabinet |
| Output contacts | 2 C/O contacts |
| Width | 45 mm |
| Type | BA 9053 |
| Operate delay | |
| Variant | |
| Auxiliary voltage | AC 110 V |
| Contact equipping | 2 changeover contacts |
| Measuring range | AC 0,5 - 5 A |
| Start up delay | Without |
| Switching delay | 0 - 20 s |
| Approvals and Markings | UKCA, CCC |
| Variant | Overcurrent relay. Energized on trip. Time delay at response value |
Questions & answers
What is the delivery time of Dold 0053125 BA9053/010 AC0.5-5A AC110V 0-20S current relay ?
The article Dold 0053125 BA9053/010 AC0.5-5A AC110V 0-20S current relay is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0053125 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0053125 BA9053/010 AC0.5-5A AC110V 0-20S current relay always at the best possible price. We can give you a discount of 2% on Dold 0053125 BA9053/010 AC0.5-5A AC110V 0-20S current relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0053125 BA9053/010 AC0.5-5A AC110V 0-20S current relay we can offer you a price of 261,33 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

