Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device

Your rating:
Average rating
product review for Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device
( 5 / 5 ) 3 ratings
Dold 0050217
This image may differ from the desired article.
340,82 EUR
( 405,58 EUR incl. VAT )
≈ £285.27  |  ≈ $374.56
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device
Datasheet:file_download Download
Lieske Part No.:1002107
Mfg Part No: 0050217
UPC/EAN: 4030641502171
Weight:0.33 kg
Type:BA9010 3AC230/400V 3/5,5KW
Graduated prices net
From piecesPrice per pieces
4325,48 EUR
8310,15 EUR
12294,81 EUR
16279,47 EUR

Product information for Dold 0050217:

The Dold BA9010 3AC230/400V 3/5,5KW is an electronic soft starter for three-phase asynchronous motors. It enables controlled, jerk-free start-up of motors with rated powers up to 5.5 kW at 400 V and up to 3 kW at 230 V. Control is achieved via a single-phase motor drive, where one of the three motor phases is controlled using phase-cut control, allowing current and torque to increase steadily during start-up. This avoids the sudden start-up torque, protecting mechanical drive components and increasing the service life of motors and gearboxes. The device is compliant with IEC/EN 60947-4-2 and suitable for industrial applications where a soft start is required to prevent damage to conveyed goods, drive assemblies, or machinery.

Applications

The BA9010 is used in systems operating three-phase asynchronous motors, particularly in machines with gear, belt, or chain drives. Typical applications include conveyor belts, fans, pumps, compressors, packaging machines, and door drives. It can also be used with single-phase transformers for limiting inrush current. The application is especially beneficial when direct motor switching would cause mechanical wear, noise, or displacement of conveyed goods.

Functions and Equipment in Detail

The device features separate adjustment options for start-up time (0.5 to 5 seconds) and initial torque (0 to 70 %). These parameters can be adjusted according to drive requirements to optimally match the start-up to load conditions. LED indicators show the operating status – green for power supply, yellow for completed soft start. After start-up, the power electronics are bypassed via an internal relay contact to minimize power losses in the device. The width is 45 mm, enabling compact mounting.

Technology Explained Simply

Phase-cut control affects a single motor phase, allowing current in that phase to increase continuously. This results in a smooth rise in motor torque, ensuring a jerk-free start. Control is performed without a neutral conductor, simplifying installation. The device is designed for supply and motor voltages of 3AC 230 V and 400 V, with a voltage range of 60 to 240 V ±10 % at 230 V and 380 to 480 V ±10 % at 400 V. The rated frequency is 50/60 Hz. The maximum switching frequency is 100 operations per hour at 5 times rated current and 5 seconds start-up time. At higher switching frequencies, monitoring of the motor winding temperature is recommended.

Compatibility and Accessories

The BA9010 can be combined with motor brake devices, facilitating integration into existing systems. It is not intended for speed control of drives, and it cannot reduce inrush current in the network. For these functions, other device types such as GC 9012 or GC 9014 are required. The protection rating is IP 20, requiring installation in enclosed switchgear. Installation is on a 35 mm standard DIN rail. The operating temperature range is 0 to +45 °C, and the storage temperature range is -25 to +75 °C. At temperatures above 40 °C or at installation heights above 1000 m, a power reduction of 2 % per degree Celsius or per 100 m is required.

Mounting and Installation

The device is clipped onto a 35 mm standard DIN rail, enabling simple and quick installation. The terminal connections are rated for max. 2 x 2.5 mm² fine-stranded wire. Installation requires no special tools, and the terminal assignment is described in the data sheet. Use of a fast-acting fuse element (semiconductor fuse) is recommended to protect the semiconductor in case of fault. The assignment type is 1 according to IEC 60947-4-1, meaning the device must be replaced after a short-circuit fault.

Operational Advantages

Using the BA9010 extends the service life of motors and mechanical drive components by avoiding high start-up torque. Start-up noise is reduced, and in conveyor systems, it prevents slippage or tipping of conveyed goods. Simple mounting allows easy integration into existing systems. In simple applications, a frequency converter can often be omitted, reducing system costs. Bypassing the power electronics after start-up minimizes power losses and heat generation in the device.

Protection Rating and Operating Conditions

The IP 20 protection rating according to IEC/EN 60529 protects against finger contact and solid foreign objects, but not against water or dust. The device is intended for use in enclosed switchgear. The operating temperature range is 0 to +45 °C, with a required power reduction of 2 % per degree Celsius above 40 °C. Installation at heights above 1000 m also requires power derating. The overvoltage category is III, pollution degree is 2, and installation class is 3. The maximum switching frequency is 100/h at 5 times rated current and 5 seconds start-up time. The re-readiness time is 200 ms.

Approvals and Markings

The device carries the UKCA marking, confirming compliance with applicable European safety and health regulations. Conformity with IEC/EN 60947-4-2 ensures reliability and safety in industrial use. Approvals are documented in the data sheet and correspond to the technical state at the time of issue.

Technical data
For single-phase motors, 230 V up to3 kW
For three-phase motors, 400 V up to5,5 kW
Load voltage up to3AC 230 / 400 V
Width45 mm
TypeBA 9010
Variant
Mains / motor voltage3AC 230 / 400 V
Nominal motor power3/5,5 kW
Approvals and MarkingsUKCA


Product data sheet
Datasheet for Dold 0050217, EAN: 4030641502171

Questions & answers

What is the delivery time of Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device?

The article Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0050217 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device always at the best possible price. We can give you a discount of 2% on Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device we can offer you a price of 325,48 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0050217 BA9010 3AC230/400V 3/5,5KW soft starter
Dold 0050217 BA9010 3AC230/400V 3/5.5KW soft start device
340,82 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0050217 BA9010 3AC230/400V 3/5,5KW soft starter
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
2 + 1 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.