Dold 0049136 IL9151.12 2-450 kOhm DC24 V 0.2-20 s level relay
|
201,24 EUR |
|||||||||||
|
( 239,48 EUR incl. VAT ) ≈ £168.44 | ≈ $221.16 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 888089 | ||||||||||
| Mfg Part No: | 0049136 | ||||||||||
| UPC/EAN: | 4030641491369 | ||||||||||
| Weight: | 0.177 kg | ||||||||||
| Type: | IL9151.122-450K-OHMDC24V0,2-20S | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0049136:
Applications
This relay is suitable for level monitoring in containers with conductive media such as water, chemicals, or other liquids. It can also be used for limit temperature detection with PTC resistors. The application includes monitoring of minimum and maximum levels, with devices configurable for both 1-point and 2-point level control. The maximum cable length to the electrodes is 3000 m, enabling flexible installation even over long distances.
Functions and Equipment in Detail
The device features three electrode connections (MIN, MAX, COM) used for 2-point and 1-point level control. The pickup value is adjustable between 2 and 450 kΩ, allowing differentiation between liquid and foam. The pickup and release delay is separately adjustable for MIN and MAX levels, ranging from 0.2 to 20 seconds. Programming is done via a rotary switch, allowing selection between operating current and resting current principle. In the operating current principle, the output relay is activated in case of fault; in the resting current principle, it remains deactivated in case of fault.
Technology Explained Simply
The measurement circuit operates with an internally generated alternating voltage of approximately 30 Hz, preventing electrolytic effects in the liquid. Galvanic isolation of the measurement circuit from the mains ensures high immunity to interference. The auxiliary voltage is DC 24 V. The output contacts consist of two relays, each with a changeover contact (2 x 1 changeover). Operational readiness is indicated by a green LED, while the relay contact status is shown by yellow (MIN) and red (MAX) LEDs.
Compatibility and Accessories
The device is compatible with standard market-available electrodes. The reference electrode (COM) is typically mounted at the lowest point of the container. If the container is made of conductive material, it can serve as the reference electrode itself. The devices are specified according to IEC/EN 60255-1 and meet requirements for safe isolation as per IEC/EN 61140 and IEC/EN 60947-1. UKCA and CCC certifications are available.
Mounting and Installation
Mounting is done in installation and industrial distributors according to DIN 43880. The connection terminals are located at the bottom. Devices can be configured in various operating modes, with output relay actuation either jointly (2-point hysteresis) or separately (independent for MIN and MAX). The operating mode selection is made via a bridge between X1 and COM, and X2 and COM.
Advantages in Operation
The separate adjustability of pickup value and delay time for MIN and MAX levels allows precise adaptation to specific requirements. High immunity to interference and galvanic isolation of the measurement circuit ensure reliable measurement results. LED indicators provide clear visual feedback on the operational status. The device is designed for industrial environments and meets necessary standards for safety and reliability.
| Technical data | |
| Classification | Füllstandsüberwachung |
| Enclosure design | Distribution board |
| Measuring range max. | 450 kΩ |
| Output contacts | 2 x 1 C/O contacts |
| Width | 35 mm |
| Type | IL 9151 |
| Operate delay | |
| Variant | |
| Auxiliary voltage | DC 24 V |
| Contact equipping | 2 x 1 changeover contact |
| Response and release delay | 0,2 - 20 s |
| Response value | 2 - 450 kOhm |
| Approvals and Markings | UKCA, CCC |
| Variant | Time delay, when level rises over and drops under setting value |
Questions & answers
What is the delivery time of Dold 0049136 IL9151.12 2-450 kOhm DC24 V 0.2-20 s level relay ?
The article Dold 0049136 IL9151.12 2-450 kOhm DC24 V 0.2-20 s level relay is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0049136 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0049136 IL9151.12 2-450 kOhm DC24 V 0.2-20 s level relay always at the best possible price. We can give you a discount of 2% on Dold 0049136 IL9151.12 2-450 kOhm DC24 V 0.2-20 s level relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0049136 IL9151.12 2-450 kOhm DC24 V 0.2-20 s level relay we can offer you a price of 198,22 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

