Dold 0045377 MK9151.11 2-450K-OHM AC24V level relay
|
164,26 EUR |
|||||||||||
|
( 195,47 EUR incl. VAT ) ≈ £137.49 | ≈ $180.52 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1001938 | ||||||||||
| Mfg Part No: | 0045377 | ||||||||||
| UPC/EAN: | 4030641453770 | ||||||||||
| Weight: | 0.175 kg | ||||||||||
| Type: | MK9151.11 2-450K-OHM AC24V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0045377:
Applications
This relay is used in systems where precise monitoring of liquid level is required, for example in water supply, wastewater treatment, chemical industry, or food processing. It is suitable for 1-point and 2-point level control, where 1-point control is intended for overflow or dry-running protection with free inflow or outflow. In 2-point control, the level is maintained between a minimum and maximum value, with electrodes MIN, MAX and COM connected. Applications also include monitoring the mixing ratio of conductive liquids and general resistance monitoring tasks, such as detecting limit temperatures with PTC resistors.
Functions and Equipment in Detail
The device features an adjustable trigger value in the range of 2 to 450 kΩ, allowing differentiation between liquid and foam. The trigger and reset delay can be adjusted between 0.2 and 20 seconds, enabling controlled response to short-term level changes. Programming is done for either the operating current principle (without bridge, output relay activated in case of fault) or the resting current principle (bridge X1-X2 or X1-COM, output relay not activated in case of fault). The output contacts consist of a changeover contact, which can be used to control pumps, solenoid valves or other loads.
Technology Explained Simply
The relay's measuring circuit is galvanically isolated from the mains, ensuring high immunity to interference. The maximum cable length to the electrodes is 3000 meters, with the actual length depending on the set resistance range. The measuring voltage is generated internally (approx. AC 10 V) and the measuring current is approximately AC 1.5 mA for a measuring range of 2 to 450 kΩ. The operating voltage is AC 24 V, although the device is also available for other auxiliary voltages from AC 24 to 415 V or DC 24 V. Operational readiness is indicated by a green LED, and contact status by a yellow LED.
Compatibility and Accessories
The relay is equipped with three electrode connection terminals, suitable for use with standard market-available electrodes. The reference electrode is typically mounted at the lowest point of the tank and connected to terminal COM. In conductive tanks, the tank itself can serve as the reference electrode. The device is also available in a version with a tamper-proof transparent cover and secure separation according to IEC/EN 61140 and IEC/EN 60947-1.
Mounting and Installation
Mounting is done in an enclosure, with the width of 22.5 mm ensuring compatibility with standard control panels. The connection terminals are clearly labeled: A1 (+/L), A2 (-/N), COM (reference electrode), MIN/MAX (limit electrodes), X1 (control input), X2 (control output), and the changeover contacts 11, 12, 14 and 21, 22, 24. The electrodes are connected according to the desired control mode (1-point or 2-point).
Advantages in Operation
The relay offers high reliability due to galvanic isolation of the measuring circuit and a wide adjustable trigger value range. The adjustable delay time prevents false alarms caused by short-term level fluctuations. The clear LED indication allows for quick status checks. The maximum cable length of 3000 meters allows flexible installation of electrodes, even in large tanks or over long distances.
| Technical data | |
| Classification | Füllstandsüberwachung |
| Enclosure design | Switch cabinet |
| Measuring range max. | 450 kΩ |
| Output contacts | 1 C/O contact |
| Width | 22,5 mm |
| Type | MK 9151 |
| Operate delay | |
| Variant | |
| Auxiliary voltage | AC 24 V |
| Contact equipping | 1 changeover contact |
| Response value | 2 - 450 kOhm |
| Variant | Time delay, when level rises over and drops under setting value |
Questions & answers
What is the delivery time of Dold 0045377 MK9151.11 2-450K-OHM AC24V level relay?
The article Dold 0045377 MK9151.11 2-450K-OHM AC24V level relay is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0045377 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0045377 MK9151.11 2-450K-OHM AC24V level relay always at the best possible price. We can give you a discount of 2% on Dold 0045377 MK9151.11 2-450K-OHM AC24V level relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0045377 MK9151.11 2-450K-OHM AC24V level relay we can offer you a price of 156,87 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

