Dold 0045244 BN9011 3AC230/400V 4/7.5KW soft start device
|
383,63 EUR |
|||||||||||
|
( 456,52 EUR incl. VAT ) ≈ £321.10 | ≈ $421.61 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 100211 | ||||||||||
| Mfg Part No: | 0045244 | ||||||||||
| UPC/EAN: | 4030641452445 | ||||||||||
| Weight: | 0.54 kg | ||||||||||
| Type: | BN9011 3AC230/400V 4/7,5KW | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0045244:
Applications
The device is designed for industrial applications where a gentle motor start is required. It is suitable for machines with gearbox, belt or chain drives, as well as for systems such as conveyor belts, pumps, fans and compressors. It can also be used with single-phase transformers for limiting inrush current. The device is used in installations with 3-phase alternating voltage of 230 V or 400 V, with motor rated power up to 11 kW at 400 V and up to 5.5 kW at 230 V. The BN9011 variant is specifically designed for motors with a rated power of 4 kW and 7.5 kW.
Functions and equipment in detail
The device operates on the principle of single-phase motor control, where one phase is slowly ramped up via electronic control. The acceleration time and initial torque are separately adjustable, allowing flexible adaptation to different loads. After the acceleration phase is completed, the power electronics are bypassed via an internal relay contact to minimize power losses and heat generation in the device. Operating states are indicated by LED displays, enabling visual monitoring of the device status. The devices are designed for industrial environments and comply with the standard IEC/EN 60947-4-2.
Technology explained simply
Control is achieved via phase-cut control, in which the voltage in one of the three motor phases is gradually increased. This causes the current in this phase to increase continuously, resulting in a uniform rise in torque. This prevents mechanical stress and damage to drive components. The maximum load voltage is 3AC 230/400 V, and the device is designed for a nominal frequency of 50/60 Hz. The width is 100 mm, allowing mounting on a 35 mm standard DIN rail. The operating temperature range is from 0 °C to +45 °C, with a power derating of 2 % per degree Celsius above 40 °C. The devices are designed for overvoltage category III and pollution degree 2, ensuring suitability for industrial environments with increased contamination risk.
Compatibility and accessories
The BN9011 can be combined with motor brake devices, facilitating integration into existing installations. It is designed for use in 3-phase networks with 230 V or 400 V and can also be retrofitted into existing installations. Mounting is done by clipping onto a 35 mm standard DIN rail. The devices are not suitable for controlling motors with capacitive loads, such as power factor correction. The use of external semiconductor protection fuses is recommended to protect the semiconductor in the event of a short circuit.
Mounting and installation
Mounting is done by clipping onto a 35 mm standard DIN rail, enabling easy integration into existing enclosures. No neutral conductor is required, simplifying installation. The devices are designed for use in enclosures meeting the requirements of installation class 3. Conductor connections can be made with max. 2 x 2.5 mm² fine-stranded cable. The operating temperature must remain within the specified range, and with high switching frequencies, monitoring of the motor winding temperature is recommended.
Advantages in operation
The gentle start reduces mechanical stress on drive components, increasing the service life of motors and mechanical parts. Startup noise is significantly reduced, and with conveyor belts, material slippage or tipping is avoided. The simple mounting on the DIN rail allows retrofitting into existing installations. In simple applications, a frequency converter can often be dispensed with, reducing system costs. After acceleration, the power electronics are bypassed, minimizing power losses in the device.
| Technical data | |
| For single-phase motors, 230 V up to | 5,5 kW |
| For three-phase motors, 400 V up to | 11 kW |
| Load voltage up to | 3AC 230 / 400 V |
| Width | 100 mm |
| Type | BN 9011 |
| Variant | |
| Mains / motor voltage | 3AC 230 / 400 V |
| Nominal motor power | 4 / 7,5 kW |
| Approvals and Markings | UKCA |
Questions & answers
What is the delivery time of Dold 0045244 BN9011 3AC230/400V 4/7.5KW soft start device?
The article Dold 0045244 BN9011 3AC230/400V 4/7.5KW soft start device is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0045244 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0045244 BN9011 3AC230/400V 4/7.5KW soft start device always at the best possible price. We can give you a discount of 2% on Dold 0045244 BN9011 3AC230/400V 4/7.5KW soft start device if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0045244 BN9011 3AC230/400V 4/7.5KW soft start device we can offer you a price of 366,37 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

