Dold 0045244, EAN: 4030641452445

Dold 0045244 BN9011 3AC230/400V 4/7,5KW soft starter

Dold 0045244 BN9011 3AC230/400V 4/7,5KW soft starter

Lieske Part No. 100211
Mfg Part No 0045244
EAN-Code 4030641452445
Manufacturer Dold
Here only 383,63 EUR
456,52 EUR incl. VAT

Further information for Dold 0045244 BN9011 3AC230/400V 4/7,5KW soft starter

Technical data
For single-phase motors, 230 V up to5,5 kW
For three-phase motors, 400 V up to11 kW
Load voltage up to3AC 230 / 400 V
Width100 mm
TypeBN 9011
Variant
Mains / motor voltage3AC 230 / 400 V
Nominal motor power4 / 7,5 kW
Approvals and MarkingsUKCA
The Dold BN9011 3AC230/400V 4/7,5KW is a soft starter for three-phase asynchronous motors, developed to reduce mechanical stress during startup. It enables a smooth and damage-free acceleration through phase-cut control, in which one of the three motor phases is gradually ramped up. This causes the current and motor torque to increase continuously, avoiding sudden startup torque. This protects mechanical drive components such as gearboxes, belts or chains and extends the service life of motors and drive parts. The application is particularly suitable for conveyor belts, pumps, fans, compressors, packaging machines and door drives, where an abrupt start could cause material displacement or noise.

Applications

The device is designed for industrial applications where a gentle motor start is required. It is suitable for machines with gearbox, belt or chain drives, as well as for systems such as conveyor belts, pumps, fans and compressors. It can also be used with single-phase transformers for limiting inrush current. The device is used in installations with 3-phase alternating voltage of 230 V or 400 V, with motor rated power up to 11 kW at 400 V and up to 5.5 kW at 230 V. The BN9011 variant is specifically designed for motors with a rated power of 4 kW and 7.5 kW.

Functions and equipment in detail

The device operates on the principle of single-phase motor control, where one phase is slowly ramped up via electronic control. The acceleration time and initial torque are separately adjustable, allowing flexible adaptation to different loads. After the acceleration phase is completed, the power electronics are bypassed via an internal relay contact to minimize power losses and heat generation in the device. Operating states are indicated by LED displays, enabling visual monitoring of the device status. The devices are designed for industrial environments and comply with the standard IEC/EN 60947-4-2.

Technology explained simply

Control is achieved via phase-cut control, in which the voltage in one of the three motor phases is gradually increased. This causes the current in this phase to increase continuously, resulting in a uniform rise in torque. This prevents mechanical stress and damage to drive components. The maximum load voltage is 3AC 230/400 V, and the device is designed for a nominal frequency of 50/60 Hz. The width is 100 mm, allowing mounting on a 35 mm standard DIN rail. The operating temperature range is from 0 °C to +45 °C, with a power derating of 2 % per degree Celsius above 40 °C. The devices are designed for overvoltage category III and pollution degree 2, ensuring suitability for industrial environments with increased contamination risk.

Compatibility and accessories

The BN9011 can be combined with motor brake devices, facilitating integration into existing installations. It is designed for use in 3-phase networks with 230 V or 400 V and can also be retrofitted into existing installations. Mounting is done by clipping onto a 35 mm standard DIN rail. The devices are not suitable for controlling motors with capacitive loads, such as power factor correction. The use of external semiconductor protection fuses is recommended to protect the semiconductor in the event of a short circuit.

Mounting and installation

Mounting is done by clipping onto a 35 mm standard DIN rail, enabling easy integration into existing enclosures. No neutral conductor is required, simplifying installation. The devices are designed for use in enclosures meeting the requirements of installation class 3. Conductor connections can be made with max. 2 x 2.5 mm² fine-stranded cable. The operating temperature must remain within the specified range, and with high switching frequencies, monitoring of the motor winding temperature is recommended.

Advantages in operation

The gentle start reduces mechanical stress on drive components, increasing the service life of motors and mechanical parts. Startup noise is significantly reduced, and with conveyor belts, material slippage or tipping is avoided. The simple mounting on the DIN rail allows retrofitting into existing installations. In simple applications, a frequency converter can often be dispensed with, reducing system costs. After acceleration, the power electronics are bypassed, minimizing power losses in the device.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/100211
qrcode für Dold 0045244 BN9011 3AC230/400V 4/7,5KW soft starter