Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay

Your rating:
Average rating
product review for Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay
( 4.6 / 5 ) 42 ratings
Dold 0041519
This image may differ from the desired article.
Dold 0041519Dold 0041519
548,94 EUR
( 653,24 EUR incl. VAT )
≈ £459.46  |  ≈ $603.29
plus delivery charges: 55,00 €
Made to order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay
Datasheet:file_download Download
Lieske Part No.:407169
Mfg Part No: 0041519
UPC/EAN: 4030641415198
Weight:0.425 kg
Type:AI 940 3AC50/60HZ 400V
Graduated prices net
From piecesPrice per pieces
3528,35 EUR
6507,77 EUR
9487,18 EUR
12466,60 EUR

Product information for Dold 0041519:

The Dold wire break relay AI 940 3AC50/60HZ 400V is a safety relay for monitoring 3-phase AC power networks. It is designed to detect wire breaks or power failures in any of the three phases by monitoring the current flow in each phase. If the current drops below 0.5 A in any phase, the relay switches its changeover contact to indicate a fault or trigger a shutdown. The width is 45 mm, allowing it to be mounted in standard enclosures with a DIN rail (IEC/EN 60715).

Applications
This relay is designed for industrial applications where power supply reliability is critical, such as in systems with motors, pumps, or conveyor belts. It is used to trigger an alarm or activate a protective switch in case of phase loss or interruption in the circuit. Monitoring is performed in the range of 0.5 to 16 A, with the measurement range valid for continuous currents up to 16 A. The rated voltage is 3AC 400 V at 50/60 Hz, making it suitable for most industrial networks.

Functions and Equipment in Detail
The device features a changeover contact (11-12-14) as output contact, which switches when a current drop below 0.5 A is detected in any phase. The contact reset time is approximately 50 ms, as is the switching delay. The contact rating is designed for an electrical life of 500,000 switching operations at 3 A and AC 230 V, according to IEC/EN 60947-5-1. The mechanical life exceeds 30 million switching operations. The switching capacity according to AC 15 is 5 A at AC 230 V. Maximum short-circuit withstand is ensured by a 6 A gG/gL fuse.

Technology Explained Simply
The relay monitors the current in each of the three phases (L1, L2, L3) and reacts when the current in any phase drops below 0.5 A. This may occur due to a wire break, contact loss, or open conductor. Detection is achieved via an inductive measurement path that measures current flow. The internal resistances are less than 6 mΩ per current path, ensuring minimal impact on the network current. The operating temperature ranges from -20 °C to +60 °C, and the storage temperature from -25 °C to +75 °C. Relative humidity is up to 93 % at 40 °C. The operating altitude is limited to a maximum of 2000 m above sea level.

Compatibility and Accessories
The relay is designed for mounting on a DIN rail (IEC/EN 60715) and is suitable for enclosures. The terminals are rated for conductor cross-sections of 2 x 2.5 mm² solid or 2 x 1.5 mm² stranded wire with ferrules (DIN 46228/-1/-2/-3/-4). The tightening torques are 0.8 Nm. For currents exceeding 16 A, the use of current transformers is recommended, with the primary side connected to the secondary side on one side. The device dimensions are 45 mm (width) x 77 mm (height) x 127 mm (depth). The protection rating is IP 40 for the housing and IP 40 for the terminals, according to IEC/EN 60529. The rated impulse voltage is 4 kV at pollution degree 2. The device complies with IEC/EN 60255-1 and is designed for continuous operation.

Mounting and Installation
Mounting is done on a DIN rail inside the enclosure. The connection terminals are designed for solid or stranded conductors. The terminals are equipped with self-lifting connection washers to ensure a secure connection. The tightening torque of 0.8 Nm must be observed to ensure a firm connection. Connections are made to terminals L1, L2, L3 (input) and L1', L2', L3' (output). The changeover contact (11-12-14) is connected to the control device or warning indicator. The device fuse (e.g. F1AG) is optional but recommended to ensure short-circuit withstand.

Advantages in Operation
The relay provides reliable wire break detection without requiring additional auxiliary voltage, simplifying installation. The low internal resistance values ensure minimal impact on network current. The high mechanical and electrical life ensures long-term operation. The IP 40 protection rating makes it suitable for industrial environments. EMC tests according to IEC/EN 61000-4-2 to -4-5 and radio interference suppression according to Class B limit (EN 55011) ensure electromagnetic compatibility. Vibration resistance (amplitude 0.35 mm, frequency 10–55 Hz) and climatic resistance (20/060/04) guarantee functionality under industrial conditions.

Technical data
1- / 3-phase3
Auxiliary voltageWithout
Enclosure designSwitch cabinet
Measuring rangeAC 0,5 - 16 A
Output contacts1 C/O contact
Width45 mm
TypeAI 940
Variant
Contact equipping1 changeover contact
Nominal voltage3AC 400 V 50/60 Hz


Product data sheet
Datasheet for Dold 0041519, EAN: 4030641415198

Questions & answers

What is the delivery time of Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay ?

The article Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0041519 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay always at the best possible price. We can give you a discount of 2% on Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 3 pieces of Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay we can offer you a price of 528,35 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0041519 wire break relay AI 940 3AC50/60HZ 400V
Dold 0041519 AI 940 3AC 50/60 Hz 400 V wire break relay
548,94 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0041519 wire break relay AI 940 3AC50/60HZ 400V
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
7 + 7 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.