Dold 0032082 MK9052.11/100 AC50/60Hz 230V thermistor motor protection relay
|
205,58 EUR |
|||||||||||
|
( 244,64 EUR incl. VAT ) ≈ £172.07 | ≈ $225.93 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1153683 | ||||||||||
| Mfg Part No: | 0032082 | ||||||||||
| UPC/EAN: | 4030641320829 | ||||||||||
| Weight: | 0.165 kg | ||||||||||
| Type: | MK9052.11/100 AC50/60HZ 230V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0032082:
Applications
This motor protection relay is intended for use in industrial plants where motors may be thermally overloaded due to high switching frequency, heavy start-up, single-phase operation, impaired cooling, or high ambient temperature. It protects motors from damage caused by overheating and extends the service life of drive technology. The application typically involves use in combination with PTC thermistors integrated into the motor, whose resistance increases with rising temperature. Up to 6 thermistors can be connected in series to ensure reliable monitoring.
Functions and Features in Detail
The device includes a wire break detection feature in the sensor circuit, ensuring that a defective or broken sensor is detected and the relay responds accordingly. The pickup value is ≥ 3 kΩ, and the drop-out value is ≤ 1.8 kΩ. The measurement circuit load is approximately 1 mW at a resistance of 1.5 kΩ, and the measurement voltage is approximately 1.2 V. The output contacts are rated for a switching capacity of 3 A / AC 230 V (make) and 1 A / AC 230 V (break). The electrical life is over 800,000 switching cycles at 3 A and AC 230 V, while the mechanical life exceeds 20 million switching cycles. The maximum short-circuit withstand requires a fuse of 4 A gG / gL.
Technology Explained Simply
The relay operates on the rest current principle, meaning the output relay is activated during normal operation and drops out when the pickup value is reached. This ensures a safe shutdown, as the contact is not activated in the event of a fault. The reset lockout (reset function) prevents automatic re-energizing after a fault; manual reset is required. The LED on the device indicates the switching state, allowing the operating condition to be visually checked. The operating temperature range is from -20 °C to +60 °C, and the device is designed for operation at altitudes below 2000 m.
Compatibility and Accessories
The relay is compatible with thermistors (PTC resistors) specifically developed for motor protection. Up to 6 sensors can be used in series. The terminal connections are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule DIN 46228-1/-2/-3/-4). The terminals are secured using flat terminals with self-lifting connection washers. The terminal markings comply with standard EN 50005.
Mounting and Installation
Mounting is done on a DIN rail (DIN 46228-1/-2/-3/-4) inside the enclosure. The tightening torque for the terminals is 0.4 Nm. The device dimensions are 22.5 mm (width) x 82 mm (height) x 99 mm (depth). The enclosure protection rating is IP 40, and the terminals are rated IP 40. The device is designed for continuous operation and complies with standard IEC/EN 60947-8. EMC requirements are met according to IEC/EN 61000-4-2 to -4-6, including radio interference suppression according to Class B limit (EN 55011). The vibration resistance is 0.35 mm amplitude at a frequency of 10 to 55 Hz.
Operational Advantages
The motor protection relay provides reliable monitoring of motor heat and protects against thermal damage. The integrated wire break detection enhances safety by detecting a faulty sensor. The reset lockout prevents unintended restarts, which is important in safety-critical systems. The compact design and DIN rail mounting facilitate installation in existing enclosures. The long service life and high switching endurance ensure low-maintenance operation over an extended period.
Protection Rating and Environmental Conditions
The enclosure is made of thermoplastic with V0 flammability rating according to UL Subject 94, ensuring good flame resistance. The operating temperature range is from -20 °C to +60 °C, and the storage temperature range is also from -20 °C to +60 °C. The operating altitude is limited to below 2000 m. The creepage and clearance distances correspond to a rated impulse voltage of 4 kV at pollution degree 2 (IEC 60664-1). The climatic resistance is certified according to IEC/EN 60068-1 (20 / 060 / 04).
Connection and Signal Description
The terminal connections are marked as follows: A1/A2 for supply voltage, P1/P2 for thermistor input, and contacts 11, 12, 14 as well as 21, 22, 24 for the changeover contacts. The LED indicates the state of the output relay. The auxiliary voltage is AC 230 V, the nominal frequency is 50/60 Hz, and the nominal power consumption is 1.8 VA. The thermal current rating (Ith) is 5 A.
Approvals and Standards
The device complies with standard IEC/EN 60947-8 and is zero-voltage safe according to VDE 0113, § 5.4.2. EMC requirements are met according to IEC/EN 61000-4-2 to -4-6. Radio interference suppression complies with Class B limit according to EN 55011. The enclosure protection rating is IP 40, and the terminals are rated IP 40. Terminal markings follow EN 50005.
More spare projector bulbs for your 3M Beamer
| Technical data | |
| Classification | Thermistor-Motorschutz |
| Enclosure design | Switch cabinet |
| Measuring range max. | > 3 kΩ |
| Output contacts | 2 C/O contacts |
| Width | 22,5 mm |
| Type | MK 9052 |
| Variant | |
| Auxiliary voltage | AC 230 V |
| Contact equipping | 1 changeover contact |
| Variant | With electro magnetic reclosing interlock (manual reset function) |
Questions & answers
What is the delivery time of Dold 0032082 MK9052.11/100 AC50/60Hz 230V thermistor motor protection relay?
The article Dold 0032082 MK9052.11/100 AC50/60Hz 230V thermistor motor protection relay is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0032082 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0032082 MK9052.11/100 AC50/60Hz 230V thermistor motor protection relay always at the best possible price. We can give you a discount of 2% on Dold 0032082 MK9052.11/100 AC50/60Hz 230V thermistor motor protection relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0032082 MK9052.11/100 AC50/60Hz 230V thermistor motor protection relay we can offer you a price of 196,33 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

