Dold 0028259 BA9036 AC50Hz 110V voltage relay
|
233,82 EUR |
|||||||||||
|
( 278,25 EUR incl. VAT ) ≈ £195.71 | ≈ $256.97 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1002182 | ||||||||||
| Mfg Part No: | 0028259 | ||||||||||
| UPC/EAN: | 4030641282592 | ||||||||||
| Weight: | 0.34 kg | ||||||||||
| Type: | BA9036 AC50HZ 110V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0028259:
Applications
This relay is used in industrial plants where continuous voltage monitoring is required to ensure operational safety. It is suitable for applications where interruption of power supply could cause damage or downtime, for example in production plants, pump controls, or lighting systems. Monitoring is performed in the range of 24 to 400 V, with the rated voltage for this variant being AC 110 V at 50 Hz.
Functions and Equipment in Detail
The relay features 2 changeover contacts as output contacts, used for switching operations during operation. The contact configuration enables control of auxiliary functions or safety disconnections. Pickup delay is activated, preventing unwanted tripping due to short voltage fluctuations. Drop-out values are adjustable and range from 0.75 to 0.95 of the set pickup value, ensuring hysteresis. Repeatability is ±0.5 %, ensuring high precision in setting.
Technology Explained Simply
The device monitors the applied voltage and responds when it falls below the set pickup value. In case of undervoltage, the relay switches its output contacts, triggering for example an alarm or shutting down a machine. The LED indicators on the front panel signal operational readiness (upper LED) and active contact position (lower LED). Rated consumption values are 6 VA or 10 W, and the device is designed for continuous operation. Temperature dependence is < 0.05 %/K, ensuring stable performance even with temperature fluctuations.
Compatibility and Accessories
The relay is designed for use with a rated voltage of AC 110 V 50 Hz. The maximum rated voltage is AC 400 V. For DC voltages above 60 V, an external resistor is required, connected to terminals e and z. The measured voltage is connected to terminals e and f. Required resistors are available in the accessory range, for example ZWS 20 SL 1.5 kΩ 20 W for DC 110 V. Switching capacity is 2 A / AC 230 V for make contacts and 1 A / AC 230 V for break contacts according to AC 15, as well as 1 A / DC 24 V according to DC 13.
Mounting and Installation
The relay is intended for installation in enclosures and has a width of 45 mm. Mounting is done in standard control panels, with terminals provided for connection wires. The LED indicators allow visual monitoring of the operating status. When using an external resistor, sufficient shock protection and spacing from adjacent components must be ensured, as the resistor becomes very hot during operation.
Operational Advantages
By enabling early detection of voltage anomalies, the relay allows preventive maintenance and reduces the likelihood of machine downtime. Adjustable values and clear indication of contact position facilitate fault localization. The high mechanical life of 30 million switching operations and electrical life of 150,000 switching operations at 6 A / AC 230 V ensure long service life. Short-circuit resistance is secured with a maximum fuse rating of 4 A gG / gL.
Approvals and Markings
The device carries the CCC approval and meets the requirements of standard IEC/EN 60255-1. Operating temperature range is from -20 °C to +60 °C, with storage temperature also allowed between -20 °C and +60 °C. The device is operational without auxiliary voltage, simplifying installation and reducing dependency on additional power sources.
| Technical data | |
| 1- / 3-phase | 1 |
| Auxiliary voltage | Without |
| Enclosure design | Switch cabinet |
| Nominal voltage max. | AC 400 V |
| Output contacts | 2 C/O contacts |
| Width | 45 mm |
| Type | BA 9036 |
| Operate delay | |
| Variant | |
| Contact equipping | 2 changeover contacts |
| Nominal voltage | AC 110 V 50 Hz |
| Time delay | without |
| Approvals and Markings | CCC |
| Variant | Undervoltage relay. Closed circuit operation |
Questions & answers
What is the delivery time of Dold 0028259 BA9036 AC50Hz 110V voltage relay?
The article Dold 0028259 BA9036 AC50Hz 110V voltage relay is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0028259 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0028259 BA9036 AC50Hz 110V voltage relay always at the best possible price. We can give you a discount of 2% on Dold 0028259 BA9036 AC50Hz 110V voltage relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0028259 BA9036 AC50Hz 110V voltage relay we can offer you a price of 223,30 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

