Dold 0027490 BA9043/0033AC50-400Hz 220V 0.5-10S undervoltage relay
|
302,01 EUR |
|||||||||||
|
( 359,39 EUR incl. VAT ) ≈ £252.78 | ≈ $331.91 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 136721 | ||||||||||
| Mfg Part No: | 0027490 | ||||||||||
| UPC/EAN: | 4030641274900 | ||||||||||
| Weight: | 0.33 kg | ||||||||||
| Type: | BA9043/0033AC50/60HZ220V0,5-10S | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0027490:
Applications
This relay is designed for use in industrial and railway applications, where reliable voltage monitoring of 3-phase AC networks is required. It is particularly suitable for networks with frequencies between 50 and 400 Hz and is rated for nominal voltages of 3AC 220 V. The maximum nominal voltage is 3/N AC 690/400 V, and the device can be operated continuously under overload conditions up to 1.2 times the nominal voltage. The harmonic insensitivity makes it robust against network disturbances caused by nonlinear loads.
Functions and Equipment in Detail
The device monitors voltage via arithmetic mean value measurement. In the BA9043/003 variant, designed for networks without a neutral conductor, phases L1 and L2 are measured against L3. The pickup delay is adjustable and ranges from 0.5 to 10 seconds. This delay is only effective if the voltage is at least 60 % of the nominal voltage. Below 40 % of the nominal voltage, disconnection occurs immediately. The hysteresis (dropout ratio) is also adjustable and ranges between 75 % and 95 % of the pickup value, ensuring stable switching behavior.
Technology Explained Simply
Power supply is directly from the monitored network. The LED indicators signal the operating status: a red LED lights up when operating voltage is present, and a green LED indicates that the output relay is activated. The contact configuration includes 2 changeover contacts, rated for switching operations with a switching capacity according to AC 15 (make: 2 A / AC 230 V) and DC 13 (break: 1 A / DC 24 V). The mechanical life expectancy exceeds 30 million switching cycles, while the electrical life expectancy is 200,000 switching cycles at 3 A and AC 230 V.
Compatibility and Accessories
The device is designed for three-phase networks without a neutral conductor and complies with the standard IEC/EN 60255-1. It is suitable for operation at altitudes up to 2000 m above sea level and can be operated in a temperature range from -20 °C to +60 °C. The housing design is intended for installation in enclosures, with a width of 45 mm. Mounting is done on a DIN rail according to IEC/EN 60715. The terminals are designed for 2 x 2.5 mm² rigid or 2 x 1.5 mm² flexible conductors with shrink tubing, secured using M3.5 plus-minus screws with self-lifting clips.
Mounting and Installation
Mounting is done on a DIN rail inside the enclosure. The connection terminals are designed for connection to phases L1, L2, L3 (without neutral conductor) as well as for output contacts (11, 12, 14 and 21, 22, 24). Cable cross-sections and tightening torques (0.8 Nm) are specified in the datasheet. Adjustment of pickup and dropout values as well as time delay is done via the rotary potentiometers on the front panel. The devices are designed for continuous operation and have a nominal power consumption of 4 VA.
Operational Advantages
Through preventive maintenance and faster fault localization, productivity is increased. The clear indication of operating states via LEDs enables quick diagnosis. The harmonic insensitivity and surge voltage resistance (overvoltage category III) ensure high reliability in industrial environments. Compliance with the standard IEC/EN 60255-1 as well as UKCA and CCC certifications guarantee conformity with European and Chinese safety requirements.
| Technical data | |
| 1- / 3-phase | 3 |
| Auxiliary voltage | Without |
| Enclosure design | Switch cabinet |
| Nominal voltage max. | 3/N AC 690 / 400 V |
| Output contacts | 2 C/O contacts |
| Width | 45 mm |
| Type | BA 9043 |
| Operate delay | |
| Variant | |
| Contact equipping | 2 changeover contacts |
| Nominal voltage | 3AC 220 V |
| Time delay | 0,5 - 10 s |
| Approvals and Markings | UKCA, CCC |
| Variant | For 3p3w systems. With adjustable time delay |
Questions & answers
What is the delivery time of Dold 0027490 BA9043/0033AC50-400Hz 220V 0.5-10S undervoltage relay ?
The article Dold 0027490 BA9043/0033AC50-400Hz 220V 0.5-10S undervoltage relay is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0027490 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0027490 BA9043/0033AC50-400Hz 220V 0.5-10S undervoltage relay always at the best possible price. We can give you a discount of 2% on Dold 0027490 BA9043/0033AC50-400Hz 220V 0.5-10S undervoltage relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0027490 BA9043/0033AC50-400Hz 220V 0.5-10S undervoltage relay we can offer you a price of 290,68 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

