Dold 0026988 BA9043/001 3AC50-400Hz 380V undervoltage relay
|
270,07 EUR |
|||||||||||
|
( 321,38 EUR incl. VAT ) ≈ £226.05 | ≈ $296.81 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 660411 | ||||||||||
| Mfg Part No: | 0026988 | ||||||||||
| UPC/EAN: | 4030641269883 | ||||||||||
| Weight: | 0.34 kg | ||||||||||
| Type: | BA9043/0013AC50/60HZ380V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0026988:
Applications
This relay is suitable for industrial applications as well as railway installations where reliable voltage monitoring of three-phase networks is required. It is used in production plants, power supply systems, and automated processes to ensure operational safety. The design allows use in environments with frequencies from 50 to 400 Hz, which is also relevant for special applications such as rail vehicle technology.
Functions and Equipment in Detail
The device monitors voltage via arithmetic mean measurement. In the variant without neutral conductor (BA9043/001), phases L1 and L2 are measured against L3 to determine the mean value. The pickup and dropout values are adjusted via rotary potentiometers on the front of the device, enabling user-friendly and precise adaptation to the specific installation. The pickup value is continuously adjustable between 0.85 and 1.05 of the rated voltage, with hysteresis ranging from 0.75 to 0.95 of the pickup value. The output contacts consist of two changeover contacts that switch the output state in case of voltage drop or loss.
Technology Explained Simply
The relay operates on the rest current principle, meaning the output relay remains inactive in the event of a fault and stays in its resting position. This prevents unwanted switching operations during voltage failure. LED indicators signal operational readiness (red LED) and the active contact position (green LED). The devices are insensitive to harmonics, meaning they operate reliably even with network distortions caused by non-linear loads. The maximum rated voltage is 3/N AC 690/400 V, with the rated voltage for this item being 3AC 380 V. The frequency tolerance is ±5 %, allowing high tolerance to frequency fluctuations.
Compatibility and Accessories
The relay is designed for networks without a neutral conductor and complies with standard IEC/EN 60255-1. It is suitable for three-phase networks with a rated frequency of 50 to 400 Hz. The width is 45 mm, enabling mounting on DIN rail. The devices are designed for use in enclosures and meet the requirements for industrial monitoring technology.
Mounting and Installation
Mounting is on DIN rail in accordance with IEC/EN 60715. The connection terminals are designed for 2 x 2.5 mm² rigid or 2 x 1.5 mm² flexible conductors with heat-shrink tubing. Fixing is done using M3.5 plus-minus screws with self-lifting terminals. Dimensions are 45 mm (width) × 73 mm (height) × 132 mm (depth). The operating temperature range is from -20 °C to +60 °C, and the storage temperature range is from -25 °C to +60 °C. The operating altitude is limited to a maximum of 2000 m above sea level.
Advantages in Operation
Using this relay enables preventive maintenance, as voltage anomalies are detected early. Rapid fault localization reduces downtime and increases productivity. The LED indicators facilitate visual monitoring of the operational status. The high mechanical life of over 30 million switching operations and the electrical life of 200,000 switching operations at 3 A and AC 230 V ensure long service life. Short-circuit resistance is ensured by a maximum fuse rating of 4 A gG/gL. The EMC coverage includes immunity to electrostatic discharge (8 kV), high-frequency radiation (20 V/m), fast transients (2 kV), and surge voltages (1 kV between supply lines, 2 kV between lines and earth).
| Technical data | |
| 1- / 3-phase | 3 |
| Auxiliary voltage | Without |
| Enclosure design | Switch cabinet |
| Nominal voltage max. | 3/N AC 690 / 400 V |
| Output contacts | 2 C/O contacts |
| Width | 45 mm |
| Type | BA 9043 |
| Operate delay | |
| Variant | |
| Contact equipping | 2 changeover contacts |
| Nominal voltage | 3AC 380 V |
| Time delay | without |
| Approvals and Markings | UKCA |
| Variant | For 3p3w systems |
Questions & answers
What is the delivery time of Dold 0026988 BA9043/001 3AC50-400Hz 380V undervoltage relay ?
The article Dold 0026988 BA9043/001 3AC50-400Hz 380V undervoltage relay is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0026988 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0026988 BA9043/001 3AC50-400Hz 380V undervoltage relay always at the best possible price. We can give you a discount of 2% on Dold 0026988 BA9043/001 3AC50-400Hz 380V undervoltage relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0026988 BA9043/001 3AC50-400Hz 380V undervoltage relay we can offer you a price of 259,94 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

