Dold 0026988, EAN: 4030641269883

Dold 0026988 undervoltage relay 380V

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

Dold 0026988 undervoltage relay 380V

Lieske Part No. 660411
Mfg Part No 0026988
EAN-Code 4030641269883
Manufacturer Dold
Here only 270,07 EUR
321,38 EUR incl. VAT

Further information for Dold 0026988 undervoltage relay 380V

Technical data
1- / 3-phase3
Auxiliary voltageWithout
Enclosure designSwitch cabinet
Nominal voltage max.3/N AC 690 / 400 V
Output contacts2 C/O contacts
Width45 mm
TypeBA 9043
Operate delayYes
Variant
Contact equipping2 changeover contacts
Nominal voltage3AC 380 V
Time delaywithout
Approvals and MarkingsUKCA
VariantFor 3p3w systems
The under-voltage relay BA9043/0013AC50/60HZ380V from Dold is an industrial monitoring switch for 3-phase AC networks. It is designed for continuous monitoring of supply voltage and responds to under-voltage or voltage loss to prevent damage to connected devices or production systems. The device is specifically designed for networks without a neutral conductor and is mounted in enclosures.

Applications
This relay is suitable for industrial applications as well as railway installations where reliable voltage monitoring of three-phase networks is required. It is used in production plants, power supply systems, and automated processes to ensure operational safety. The design allows use in environments with frequencies from 50 to 400 Hz, which is also relevant for special applications such as rail vehicle technology.

Functions and Equipment in Detail
The device monitors voltage via arithmetic mean measurement. In the variant without neutral conductor (BA9043/001), phases L1 and L2 are measured against L3 to determine the mean value. The pickup and dropout values are adjusted via rotary potentiometers on the front of the device, enabling user-friendly and precise adaptation to the specific installation. The pickup value is continuously adjustable between 0.85 and 1.05 of the rated voltage, with hysteresis ranging from 0.75 to 0.95 of the pickup value. The output contacts consist of two changeover contacts that switch the output state in case of voltage drop or loss.

Technology Explained Simply
The relay operates on the rest current principle, meaning the output relay remains inactive in the event of a fault and stays in its resting position. This prevents unwanted switching operations during voltage failure. LED indicators signal operational readiness (red LED) and the active contact position (green LED). The devices are insensitive to harmonics, meaning they operate reliably even with network distortions caused by non-linear loads. The maximum rated voltage is 3/N AC 690/400 V, with the rated voltage for this item being 3AC 380 V. The frequency tolerance is ±5 %, allowing high tolerance to frequency fluctuations.

Compatibility and Accessories
The relay is designed for networks without a neutral conductor and complies with standard IEC/EN 60255-1. It is suitable for three-phase networks with a rated frequency of 50 to 400 Hz. The width is 45 mm, enabling mounting on DIN rail. The devices are designed for use in enclosures and meet the requirements for industrial monitoring technology.

Mounting and Installation
Mounting is on DIN rail in accordance with IEC/EN 60715. The connection terminals are designed for 2 x 2.5 mm² rigid or 2 x 1.5 mm² flexible conductors with heat-shrink tubing. Fixing is done using M3.5 plus-minus screws with self-lifting terminals. Dimensions are 45 mm (width) × 73 mm (height) × 132 mm (depth). The operating temperature range is from -20 °C to +60 °C, and the storage temperature range is from -25 °C to +60 °C. The operating altitude is limited to a maximum of 2000 m above sea level.

Advantages in Operation
Using this relay enables preventive maintenance, as voltage anomalies are detected early. Rapid fault localization reduces downtime and increases productivity. The LED indicators facilitate visual monitoring of the operational status. The high mechanical life of over 30 million switching operations and the electrical life of 200,000 switching operations at 3 A and AC 230 V ensure long service life. Short-circuit resistance is ensured by a maximum fuse rating of 4 A gG/gL. The EMC coverage includes immunity to electrostatic discharge (8 kV), high-frequency radiation (20 V/m), fast transients (2 kV), and surge voltages (1 kV between supply lines, 2 kV between lines and earth).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/660411
qrcode für Dold 0026988 undervoltage relay 380V