Dold 0024206 MK9052.11 AC50/60Hz 24V thermistor motor protection relay
|
131,37 EUR |
|||||||||||
|
( 156,33 EUR incl. VAT ) ≈ £109.96 | ≈ $144.38 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1153682 | ||||||||||
| Mfg Part No: | 0024206 | ||||||||||
| UPC/EAN: | 4030641242060 | ||||||||||
| Weight: | 0.165 kg | ||||||||||
| Type: | MK9052.11 AC50/60HZ 24V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0024206:
Applications
This relay is intended for use in industrial drive systems where precise motor temperature monitoring is required. It is particularly suitable for plants where thermal overloads may occur due to irregular operating conditions or mechanical stress. The use of up to six thermistors in series enables flexible adaptation to different motor sizes and requirements. The integrated wire break detection in the sensor circuit ensures that a defective or broken temperature sensor is detected, preventing malfunctions.
Functions and Equipment in Detail
The MK9052.11 features 1 changeover contact as contact configuration, with the output contacts comprising a total of 2 changeover contacts. The response delay is less than 20 ms, and the reset delay is less than 15 ms, enabling rapid response to temperature changes. The response threshold is ≥ 3 kΩ, and the reset threshold is ≤ 1.8 kΩ. The measurement circuit load is approximately 1 mW at a resistance of 1.5 kΩ, and the measurement voltage is approximately 1.2 V. The rated power consumption is 1.8 VA. The contact load is specified according to AC 15: make contact 3 A / AC 230 V, break contact 1 A / AC 230 V. The electrical life is over 800,000 switching operations at 3 A and AC 230 V, and the mechanical life is over 20 million switching operations. The maximum short-circuit withstand requires a fuse of 4 A gG / gL.
Technology Explained Simply
The relay monitors the motor temperature via one or more thermistors, which can be connected in series. When a specific resistance value (≥ 3 kΩ) is reached, the output relay is de-energized, interrupting the motor's power supply. The reset condition (≤ 1.8 kΩ) ensures that the relay re-activates when the temperature drops. The integrated wire break detection checks the integrity of the sensor circuit to avoid false alarms from defective sensors. The LED indicates the switching state, allowing the operating status to be visually checked. The operating temperature range is between -20 °C and +60 °C, and the storage temperature range is also between -20 °C and +60 °C. The operating altitude is limited to below 2000 m.
Compatibility and Accessories
The device is compliant with IEC/EN 60947-8 and can be combined with various thermistors specifically developed for motor protection. The connection terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with sleeve DIN 46228-1/-2/-3/-4). Mounting is via flat terminals with self-lifting connection washers, with a tightening torque of 0.4 Nm. Installation is on a DIN rail according to IEC/EN 60715. Terminal marking follows EN 50005.
Mounting and Installation
Mounting is carried out in an enclosure on a DIN rail. The connection terminals are clearly marked: A1/A2 for the operating voltage, P1/P2 for the thermistor input, and the changeover contacts are designated as 11, 12, 14 and 21, 22, 24. Conductor connections must be made according to the specified cross-sections. The vibration resistance is specified as an amplitude of 0.35 mm at a frequency of 10 to 55 Hz. The climatic resistance is specified according to IEC/EN 60068-1 with the designation 20 / 060 / 04.
Operational Advantages
The relay provides reliable and precise temperature monitoring with short response and reset delays. The integrated wire break detection increases safety by detecting defective sensors. The compact design with a width of 22.5 mm enables efficient space utilization in enclosures. The high mechanical and electrical life ensures long-term operation with minimal maintenance. The EMC coverage according to IEC/EN 61000-4-2 to -4-5 ensures robust operation in electromagnetically demanding environments. The radio frequency interference suppression complies with emission limit class B according to EN 55011.
More spare projector bulbs for your 3M Beamer
| Technical data | |
| Classification | Thermistor-Motorschutz |
| Enclosure design | Switch cabinet |
| Measuring range max. | > 3 kΩ |
| Output contacts | 2 C/O contacts |
| Width | 22,5 mm |
| Type | MK 9052 |
| Variant | |
| Auxiliary voltage | AC 24 V |
| Contact equipping | 1 changeover contact |
Questions & answers
What is the delivery time of Dold 0024206 MK9052.11 AC50/60Hz 24V thermistor motor protection relay?
The article Dold 0024206 MK9052.11 AC50/60Hz 24V thermistor motor protection relay is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0024206 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0024206 MK9052.11 AC50/60Hz 24V thermistor motor protection relay always at the best possible price. We can give you a discount of 2% on Dold 0024206 MK9052.11 AC50/60Hz 24V thermistor motor protection relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0024206 MK9052.11 AC50/60Hz 24V thermistor motor protection relay we can offer you a price of 125,46 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

