Dold 0024206, EAN: 4030641242060

Dold 0024206 MK9052.11 AC50/60HZ 24V thermistor motor protection relay

Dold 0024206 MK9052.11 AC50/60HZ 24V thermistor motor protection relay

Lieske Part No. 1153682
Mfg Part No 0024206
EAN-Code 4030641242060
Manufacturer Dold
Here only 131,37 EUR
156,33 EUR incl. VAT

Further information for Dold 0024206 MK9052.11 AC50/60HZ 24V thermistor motor protection relay

Technical data
ClassificationThermistor-Motorschutz
Enclosure designSwitch cabinet
Measuring range max.> 3 kΩ
Output contacts2 C/O contacts
Width22,5 mm
TypeMK 9052
Variant
Auxiliary voltageAC 24 V
Contact equipping1 changeover contact
The Dold MK9052.11 AC50/60HZ 24V is a thermistor motor protection relay for use in industrial plants, particularly to prevent thermal motor overloads. It monitors motor temperature via special thermistors (PTC resistors) and protects the motor from damage caused by high switching frequency, heavy start-up, single-phasing, impaired cooling, or high ambient temperature. The device operates on the standby current principle, whereby the output relay is not activated in the event of a fault, ensuring safe disconnection. The auxiliary voltage is AC 24 V, and the operating frequency is 50/60 Hz. The width of 22.5 mm allows for compact installation in enclosures. The housing design is intended for use in enclosures, with the housing made of thermoplastic with V0 behaviour according to UL Subject 94. The housing protection rating is IP 40, and the terminals are rated IP 20, providing protection against contact and dust, but not against water.

Applications
This relay is intended for use in industrial drive systems where precise motor temperature monitoring is required. It is particularly suitable for plants where thermal overloads may occur due to irregular operating conditions or mechanical stress. The use of up to six thermistors in series enables flexible adaptation to different motor sizes and requirements. The integrated wire break detection in the sensor circuit ensures that a defective or broken temperature sensor is detected, preventing malfunctions.

Functions and Equipment in Detail
The MK9052.11 features 1 changeover contact as contact configuration, with the output contacts comprising a total of 2 changeover contacts. The response delay is less than 20 ms, and the reset delay is less than 15 ms, enabling rapid response to temperature changes. The response threshold is ≥ 3 kΩ, and the reset threshold is ≤ 1.8 kΩ. The measurement circuit load is approximately 1 mW at a resistance of 1.5 kΩ, and the measurement voltage is approximately 1.2 V. The rated power consumption is 1.8 VA. The contact load is specified according to AC 15: make contact 3 A / AC 230 V, break contact 1 A / AC 230 V. The electrical life is over 800,000 switching operations at 3 A and AC 230 V, and the mechanical life is over 20 million switching operations. The maximum short-circuit withstand requires a fuse of 4 A gG / gL.

Technology Explained Simply
The relay monitors the motor temperature via one or more thermistors, which can be connected in series. When a specific resistance value (≥ 3 kΩ) is reached, the output relay is de-energized, interrupting the motor's power supply. The reset condition (≤ 1.8 kΩ) ensures that the relay re-activates when the temperature drops. The integrated wire break detection checks the integrity of the sensor circuit to avoid false alarms from defective sensors. The LED indicates the switching state, allowing the operating status to be visually checked. The operating temperature range is between -20 °C and +60 °C, and the storage temperature range is also between -20 °C and +60 °C. The operating altitude is limited to below 2000 m.

Compatibility and Accessories
The device is compliant with IEC/EN 60947-8 and can be combined with various thermistors specifically developed for motor protection. The connection terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with sleeve DIN 46228-1/-2/-3/-4). Mounting is via flat terminals with self-lifting connection washers, with a tightening torque of 0.4 Nm. Installation is on a DIN rail according to IEC/EN 60715. Terminal marking follows EN 50005.

Mounting and Installation
Mounting is carried out in an enclosure on a DIN rail. The connection terminals are clearly marked: A1/A2 for the operating voltage, P1/P2 for the thermistor input, and the changeover contacts are designated as 11, 12, 14 and 21, 22, 24. Conductor connections must be made according to the specified cross-sections. The vibration resistance is specified as an amplitude of 0.35 mm at a frequency of 10 to 55 Hz. The climatic resistance is specified according to IEC/EN 60068-1 with the designation 20 / 060 / 04.

Operational Advantages
The relay provides reliable and precise temperature monitoring with short response and reset delays. The integrated wire break detection increases safety by detecting defective sensors. The compact design with a width of 22.5 mm enables efficient space utilization in enclosures. The high mechanical and electrical life ensures long-term operation with minimal maintenance. The EMC coverage according to IEC/EN 61000-4-2 to -4-5 ensures robust operation in electromagnetically demanding environments. The radio frequency interference suppression complies with emission limit class B according to EN 55011.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1153682
qrcode für Dold 0024206 MK9052.11 AC50/60HZ 24V thermistor motor protection relay