Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay

Your rating:
Average rating
product review for Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay
( 0 / 5 ) 0 ratings
Dold 0024104
This image may differ from the desired article.
153,82 EUR
( 183,05 EUR incl. VAT )
≈ £128.75  |  ≈ $169.05
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay
Datasheet:file_download Download
Lieske Part No.:1153684
Mfg Part No: 0024104
UPC/EAN: 4030641241049
Weight:0.165 kg
Type:MK9052.12 AC50/60HZ 24V
Graduated prices net
From piecesPrice per pieces
5146,90 EUR
10139,98 EUR
15133,05 EUR
20126,13 EUR

Product information for Dold 0024104:

The Dold MK9052.12 AC50/60HZ 24V is a thermistor motor protection relay for use in industrial enclosures. It prevents thermal motor overloads caused by high switching frequency, heavy start-up, single-phase operation, impaired cooling, or high ambient temperature. The device monitors the temperature of electric motors via special thermistors (PTC resistors) and switches off the motor when a critical resistance value is reached. The auxiliary voltage is AC 24 V, and the relay is equipped with 2 changeover contacts, enabling flexible integration into existing circuits. The width of 22.5 mm allows compact mounting on a DIN rail within the enclosure.

Applications

The motor protection relay MK9052.12 is designed for use in industrial plants where reliable monitoring of motor heat is required. It is particularly used in drive technology, pumps, fans, conveyor systems, and other machinery where thermal overload protection is necessary. The application is intended for environments with an operating temperature of -20 °C to +60 °C and an operating altitude below 2000 m. The protection rating IP 40 for the housing and IP 40 for the terminals ensures sufficient protection against contact and foreign objects, but not against splashing water or dust – thus it is intended for indoor use.

Functions and Equipment in Detail

The relay operates on the standby current principle, where the output relay is not activated in the event of a fault. This means the motor is only switched off when the temperature sensor (thermistor) reaches a resistance of at least 3 kΩ – a value indicating critical heating. The reset value is at most 1.8 kΩ, so the relay reactivates after the motor has cooled down. The wire break detection in the sensor circuit ensures that a broken sensor wire is also recognized as a fault. Up to six thermistors can be connected in series to ensure comprehensive temperature monitoring. An LED indicates the relay’s switching state.

Technology Explained Simply

The input voltage for the temperature sensor is approximately 1.2 V at a resistance of 1.5 kΩ, with a measurement circuit load of about 1 mW. The auxiliary voltage of AC 24 V is supplied via terminals A1/A2. The relay has a rated consumption of 1.8 VA at a frequency of 50/60 Hz. The response delay is less than 20 ms, and the reset delay is less than 15 ms, enabling a rapid reaction to temperature changes. The contact configuration with 2 changeover contacts allows control of multiple circuits. The mechanical life exceeds 20 million switching operations, and the electrical life is 800,000 switching operations at 3 A and AC 230 V.

Compatibility and Accessories

The device is compliant with IEC/EN 60947-8 and can be operated with thermistors or bimetal contacts. The terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule DIN 46228-1/-2/-3/-4). Mounting is done on a DIN rail (IEC/EN 60715). The switching capacity is 3 A/AC 230 V for make contacts and 1 A/AC 230 V for break contacts. The maximum fuse rating is 4 A gG/gL. The EMC characteristics comply with standards IEC/EN 61000-4-2 to -4-6, including radio frequency interference suppression according to EN 55011, Class B.

Mounting and Installation

Mounting is done on a DIN rail within the enclosure. The connection terminals are clearly labeled: A1/A2 for operating voltage, P1/P2 for thermistor input, and the changeover contacts are marked as 11/12/14 and 21/22/24. The tightening torque is 0.4 Nm. Vibration resistance is ensured according to IEC/EN 60068-2-6 with an amplitude of 0.35 mm and a frequency of 10 to 55 Hz. Climate resistance corresponds to designation 20/060/04 according to IEC/EN 60068-1.

Advantages in Operation

The MK9052.12 provides reliable, low-maintenance monitoring of motor heat. The integrated wire break detection prevents malfunctions due to defective sensors. The clear indication via LED simplifies diagnosis. The compact design and DIN rail mounting enable flexible integration into existing control systems. The high mechanical and electrical life ensures long-term operation without replacement. Compliance with IEC/EN 60947-8 and EMC testing according to IEC/EN 61000-4-2 to -4-6 guarantee safe and interference-free operation in industrial environments.
More spare projector bulbs for your 3M Beamer


Technical data
ClassificationThermistor-Motorschutz
Enclosure designSwitch cabinet
Measuring range max.> 3 kΩ
Output contacts2 C/O contacts
Width22,5 mm
TypeMK 9052
Variant
Auxiliary voltageAC 24 V
Contact equipping2 changeover contacts


Product data sheet
Datasheet for Dold 0024104, EAN: 4030641241049

Questions & answers

What is the delivery time of Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay?

The article Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0024104 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay always at the best possible price. We can give you a discount of 2% on Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay we can offer you a price of 146,90 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0024104 thermistor motor protection relay MK9052.12 AC50/60Hz 24V
Dold 0024104 MK9052.12 AC50/60Hz 24V thermistor motor protection relay
153,82 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0024104 thermistor motor protection relay MK9052.12 AC50/60Hz 24V
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
3 + 3 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.