Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay

Your rating:
Average rating
product review for Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay
( 4 / 5 ) 2 ratings
Dold 0000864
This image may differ from the desired article.
286,96 EUR
( 341,48 EUR incl. VAT )
≈ £240.19  |  ≈ $315.37
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay
Datasheet:file_download Download
Lieske Part No.:1100712
Mfg Part No: 0000864
UPC/EAN: 4030641008642
Weight:0.625 kg
Type:AI 838 AC50/60HZ 0,5-1A
Graduated prices net
From piecesPrice per pieces
4274,05 EUR
8261,13 EUR
12248,22 EUR
16235,31 EUR

Product information for Dold 0000864:

The overcurrent relay AI 838 from Dold is a single-phase measuring relay designed for use in enclosures, intended for monitoring alternating current circuits in the AC 50/60 Hz range with a measuring range of 0.5 to 1 A. It is used to detect currents exceeding the set pickup value and triggers a switching operation via an integrated changeover contact when the threshold is exceeded. The relay's scale is adjusted to the pickup value, so the relay activates as soon as the current exceeds the set value. It returns to its resting position when the current falls below the drop-out value, which is determined by multiplying the pickup value by the drop-out ratio (hysteresis). The hysteresis is approximately 0.8 at the beginning of the scale and approximately 0.9 in the middle or at the end of the scale for alternating current. For direct current with residual ripple below 5 %, the hysteresis is approximately 0.6 at the beginning of the scale and approximately 0.7 in the middle or at the end. The pickup value is adjusted continuously and internally on the device. The switching delay is approximately 100 ms, with longer delays achievable by connecting an external time or delay relay in series.

Applications

The AI 838 is intended for use in industrial and technical installations where precise current monitoring is required. It is suitable, for example, for monitoring motors, transformer windings, heating circuits, or other loads where an unexpected current increase may indicate a fault or overload. The enclosure design and width of 45 mm allow for easy mounting in standard control panels. The device is compliant with IEC/EN 60255-1 and designed for use in electrical installations with a rated voltage up to 230 V AC.

Functions and Equipment in Detail

The relay features a changeover contact as the output contact, which switches the contact state when the relay operates. The contact configuration is therefore suitable for controlling auxiliary circuits, signal lamps, alarms, or other control devices. The contact rating is up to 4 A for AC 24 V to 380 V with a power factor of 1 to 0.7, and up to 3 A with a power factor of 0.4. For direct current, the rating is up to 1 A at 24 V to 220 V with resistive load and up to 0.5 A with inductive load. The electrical life is 5 million switching operations at a switching frequency of 3000 operations per hour and 30 % of switching capacity. The thermal current (Ith) is 6 A. The relay operates without auxiliary voltage, enabling simple installation and maintenance.

Technology Explained Simply

The AI 838 operates as an inductive measuring relay, detecting current in the measuring circuit via an integrated current transformer or directly through the input terminals i and k. The internal resistance of the relay varies depending on the measuring range; for the 0.5 to 1 A range, it is 4.45 Ohm. The overload capacity is limited to 1.0 times the scale end value for continuous operation up to 12 A, and to 2.0 times for short durations (1 second). The rated power consumption is less than 18 VA for alternating voltage. The repeatability accuracy is ≤ ±2 % for alternating current and ≤ 15 % for direct current. The contact configuration is designed for high switching durability, with life depending on load and switching frequency.

Compatibility and Accessories

The relay is suitable for use with current transformers to extend the measuring range. For currents above 16 A, a current transformer with a secondary rated current of 5 A (e.g., type KSW 73 from Ritz Instrument Transformers GmbH) can be used. The measuring range shift due to different lead lengths is shown in the datasheet. For direct current measurements with higher currents, a shunt can be connected in parallel with the relay. The information on measuring range extension refers to a lead with a resistance of approximately 0.5 mΩ (corresponding to 0.30 m length with 10 mm² cross-section made of E-Cu) and an ambient temperature of 20 °C.

Mounting and Installation

The relay is mounted in enclosures and designed for installation in standard control panels with a width of 45 mm. The connection terminals i and k serve as the current input, while contacts 11, 12, and 14 form the changeover contact. Mounting is done via screw fastening, with electrical connections to be made according to the specifications in the datasheet. The switching delay of approximately 100 ms must be considered when planning control sequences.

Operational Advantages

The AI 838 provides precise and reliable current monitoring without auxiliary voltage, simplifying installation and enhancing operational safety. The continuous adjustment of the pickup value allows flexible adaptation to different applications. The high electrical life and robust construction ensure long service life. Compliance with IEC/EN 60255-1 guarantees adherence to international standards for measuring instruments in electrical installations. The integrated hysteresis prevents unwanted switching operations due to minor fluctuations around the pickup value.

Technical data
1- / 3-phase1
Auxiliary voltageWithout
Enclosure designSwitch cabinet
Output contacts1 C/O contact
Width45 mm
TypeAI 838
Variant
Contact equipping1 changeover contact
Measuring rangeAC 50/60 Hz 0,5 - 1 A


Product data sheet
Datasheet for Dold 0000864, EAN: 4030641008642

Questions & answers

What is the delivery time of Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay?

The article Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0000864 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay always at the best possible price. We can give you a discount of 2% on Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay we can offer you a price of 274,05 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0000864 overcurrent relay AI 838 AC50/60Hz 0.5-1A
Dold 0000864 AI 838 AC50/60Hz 0.5-1A overcurrent relay
286,96 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0000864 overcurrent relay AI 838 AC50/60Hz 0.5-1A
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
2 + 2 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.