Products of Cimco
Categories with products from Cimco
- Electronics ➤ Energy ➤ Extensions / cable drums ( 9 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Cable joint sets ➤ Casting resin and cable sleeves ( 11 )
- Electrics ➤ Installation ➤ Grounding Systems ➤ Lightning protection material ( 5 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 1 )
- Electrics ➤ Installation ➤ Securing material ➤ NH fuses and accessories ( 1 )
- Electrics ➤ Installation ➤ Terminals ➤ Cable lugs, connectors, blank - isolated ( 268 )
- Light & Sound ➤ Light Systems ➤ Downlights ➤ Downlights for NV ( 2 )
- Light & Sound ➤ Light Systems ➤ Living Room Lamps ➤ Recessed lighting ( 1 )
- Light & Sound ➤ Light Systems ➤ Pocket Lamps ( 1 )
- Electronics ➤ Measurement ➤ Cable Testers ( 1 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- Electronics ➤ Measurement ➤ Multimeters ( 1 )
- Electronics ➤ Measurement ➤ Other Measuring Devices ( 15 )
- Electronics ➤ Measurement ➤ Testers ( 1 )
- Electronics ➤ Measurement ➤ Voltage Measurement ( 2 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 7 )
- Technology ➤ Security Technology ➤ Sensors ➤ Fire & Gas Detectors ( 1 )
- Technology ➤ Tools ➤ Cable Drum Uncoilers ( 9 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 87 )
- Technology ➤ Tools ➤ Drills ( 163 )
- Technology ➤ Tools ➤ Knifes ( 42 )
- Technology ➤ Tools ➤ Ladders ( 6 )
- Technology ➤ Tools ➤ Miscellaneous ( 850 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 6 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Step & Taper Drills ( 13 )
- Technology ➤ Tools ➤ Power Tools ➤ Automotive ( 1 )
- Technology ➤ Tools ➤ Punches ( 2 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Head Protection ( 4 )
- Technology ➤ Tools ➤ Saws ( 13 )
- Technology ➤ Tools ➤ Screwdrivers ( 120 )
- Technology ➤ Tools ➤ Soldering Tools ➤ Soldering Accessories ( 7 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 47 )
- Technology ➤ Tools ➤ Wrenches ( 201 )
 |
 Cimco 202116Cimco 202116 Taps M3 S DIN352Hand tap DIN 352/HSS, for metric ISO thread according to DIN 13 (tolerance 6 H), three-piece set: pre-cutter - middle cutter - finishing cutter. Design: thread: M3, pitch: 0.45 mm, shaft diameter: 2.8 ... Lieske Part No.: 334211 Mfg Part No: 202116 |
19,25 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 202120Cimco 202120 Taps M4 S DIN352 Hand tap DIN 352/HSS, for metric ISO thread according to DIN 13 (tolerance 6 H), three-piece set: pre-cutter - middle cutter - finishing cutter. Design: thread: M4, pitch: 0.70 mm, shaft diameter: 4.5 ... Lieske Part No.: 334204 Mfg Part No: 202120 |
19,25 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 202123Cimco 202123 Taps M5 S DIN352 Hand tap DIN 352/HSS, for metric ISO thread according to DIN 13 (tolerance 6 H), three-piece set: pre-cutter - middle cutter - finishing cutter. Design: thread: M5, pitch: 0.80 mm, shaft diameter: 6.0 ... Lieske Part No.: 334203 Mfg Part No: 202123 |
19,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 202124Cimco 202124 Taps M6 S DIN352 Hand tap DIN 352/HSS, for metric ISO thread according to DIN 13 (tolerance 6 H), three-piece set: pre-cutter - middle cutter - finishing cutter. Design: thread: M6, pitch: 1.00 mm, shaft diameter: 6.0 ... Lieske Part No.: 334200 Mfg Part No: 202124 |
20,62 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 202126Cimco 202126 Taps M8 S DIN352 Hand tap DIN 352/HSS, for metric ISO thread according to DIN 13 (tolerance 6 H), three-piece set: pre-cutter - middle cutter - finishing cutter. Design: thread: M8, pitch: 1.25 mm, shaft diameter: 6.0 ... Lieske Part No.: 334195 Mfg Part No: 202126 |
23,31 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 202128 202128Cimco 202128 tap M10 S DIN352 Hand tap DIN 352/HSS, for metric ISO thread according to DIN 13 (tolerance 6 H), three-piece set: pre-cutter - middle cutter - finishing cutter. Design: thread: M10, pitch: 1.50 mm, shaft diameter: 7. Lieske Part No.: 1013467 Mfg Part No: 202128 |
29,34 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 203050Cimco 203050 Taps M3, direct Schneider HSS tap direct cutter, with exposed teeth, dimensions according to DIN 352, for metric ISO thread according to DIN 13. Design: Thread M3, pitch: 0.50 mm, shaft diameter: 3.5 mm, total length: 40 mm, ... Lieske Part No.: 334137 Mfg Part No: 203050 |
10,90 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 203051Cimco 203051 203 051 taps M4, direct Schneider HSS tap direct cutter, with exposed teeth, dimensions according to DIN 352, for metric ISO thread according to DIN 13. Design: thread M4, pitch: 0.70 mm, shaft diameter: 4.5 mm, total length: 45 mm, ... Lieske Part No.: 334134 Mfg Part No: 203051 |
11,14 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 203052Cimco 203052 203 052 Taps M5, direct Schneider HSS tap direct cutter, with exposed teeth, dimensions according to DIN 352, for metric ISO thread according to DIN 13. Design: thread M5, pitch: 0.80 mm, shaft diameter: 6.0 mm, total length: 50 mm, ... Lieske Part No.: 334126 Mfg Part No: 203052 |
11,56 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 203053Cimco 203053 203 053 Taps M6, Direct Schneider HSS tap direct cutter, with exposed teeth, dimensions according to DIN 352, for metric ISO thread according to DIN 13. Design: thread M6, pitch: 1.00 mm, shaft diameter: 6.0 mm, total length: 50 mm, ... Lieske Part No.: 334117 Mfg Part No: 203053 |
11,87 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 203054Cimco 203054 203 054 taps M8, direct Schneider HSS tap direct cutter, with exposed teeth, dimensions according to DIN 352, for metric ISO thread according to DIN 13. Design: thread M8, pitch: 1.25 mm, shaft diameter: 7.0 mm, total length: 56 mm, ... Lieske Part No.: 337947 Mfg Part No: 203054 |
12,85 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 203055Cimco 203055 Taps M10, Direct Schneider HSS tap direct cutter, with exposed teeth, dimensions according to DIN 352, for metric ISO thread according to DIN 13. Design: Thread M10, pitch: 1.50 mm, shaft diameter: 7.0 mm, total length: 70 mm, ... Lieske Part No.: 337941 Mfg Part No: 203055 |
14,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 203060 203060Cimco 203060 tap M12 direct cutter HSS tap direct cutter, with exposed teeth, dimensions according to DIN 352, for metric ISO thread according to DIN 13. Design: thread M12, pitch: 1.75 mm, shaft diameter: 9.0 mm, total length: 75 mm, ... Lieske Part No.: 1013510 Mfg Part No: 203060 |
16,37 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 203070Cimco 203070 HSS tap direct cutter set M3-12 metal cassette HSS taps DIRECT CUTTER single cut taps DIN 352/B with spiral point, for metric standard thread, in plastic case, 1 each tap M 3 - 4 - 5 - 6 - 8 - 10 - 12, 1 each HSS twist drill (core hole drill) 2.5 ... Lieske Part No.: 679214 Mfg Part No: 203070 |
98,12 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 203620 203620Cimco 203620 die M4 DIN223 Die DIN 223, pre-slotted, for metric ISO thread according to DIN 13 (tolerance 6 G). M4 Lieske Part No.: 1426358 Mfg Part No: 203620 |
16,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 203920Cimco 203920 HSS Tap Set, 3-piece M3-M12 HSS tap set in metal case, with taps according to DIN 352, for metric standard threads, 3-piece sets with pre-, middle and finishing cutters, 1 set each M3-4-5-6-8-10-12 Lieske Part No.: 754780 Mfg Part No: 203920 |
134,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 20 3924 203924Cimco 203924 HSS Tap Set 20 3924, 3pc. M3-4-5-6-8-10-12 with drill HSS tap sets in a metal case, with taps according to DIN 352, for metric standard threads, 3-piece sets with pre-, middle and finishing cutters, 1 set each of M3-4-5-6-8-10-12, additionally with HSS ... Lieske Part No.: 127677 Mfg Part No: 203924 Type: 20 3924 |
161,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 203930Cimco 203930 tapping stuff set , Complete Set HSS thread cutting tool set for metric standard threads in a metal cassette, with taps according to DIN 352, 3-piece sets, M3-4-5-6-8-10-12, dies according to DIN 223, M3-4-5-6-8-10-12, thread gauge, ... Lieske Part No.: 135129 Mfg Part No: 203930 |
312,30 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 204810 204810Cimco 204810 borehole blower Enables cleaning of drill holes from 8 mm Ø. Drill holes should be cleaned of drilling dust, this increases the holding values of the inserted dowel. Lieske Part No.: 1895176 Mfg Part No: 204810 |
4,91 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 206310 206310Cimco 206310 206,310 formwork drill D10mm, L400mm f.Beton unsuitable Formwork drill - safety formwork drill made of chrome-vanadium steel, for wood, lightweight panels, plasterboard, not suitable for concrete and stone. Design: Ø: 10 mm, length: 400, pack: 1 Lieske Part No.: 955067 Mfg Part No: 206310 |
13,16 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 206312Cimco 206312 formwork drill 400mm, D = 12mm chrome vanadium steel Formwork drill - safety formwork drill made of chrome-vanadium steel, for wood, lightweight panels, plasterboard, not suitable for concrete and stone. Design: Ø: 12 mm, length: 400, pack: 1 Lieske Part No.: 742806 Mfg Part No: 206312 |
-6% 15,25 EUR 16,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 206314 206314Cimco 206314 formwork drill D14mm L400mm not suitable for concrete Formwork drill - safety formwork drill made of chrome-vanadium steel, for wood, lightweight panels, plasterboard, not suitable for concrete and stone. Design: Ø: 14 mm, length: 400, pack: 1 Lieske Part No.: 1580918 Mfg Part No: 206314 |
17,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 206322 206322Cimco 206322 formwork drill D22mm L400mm not suitable for concrete Formwork drill - safety formwork drill made of chrome-vanadium steel, for wood, lightweight panels, plasterboard, not suitable for concrete and stone. Design: Ø: 22 mm, length: 400, pack: 1 Lieske Part No.: 1580917 Mfg Part No: 206322 |
34,35 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 206325Cimco 206325 formwork drill, 25mm 400mm chrome vanadium steel Formwork drill - safety formwork drill made of chrome-vanadium steel, for wood, lightweight panels, plasterboard, not suitable for concrete and stone. Design: Ø: 25 mm, length: 400, pack: 1 Lieske Part No.: 177973 Mfg Part No: 206325 |
52,93 EUR 53,29 EUR
plus delivery charges
Delivery time on requestinfo_outline
|