Products of Cimco
Categories with products from Cimco
- Electronics ➤ Energy ➤ Extensions / cable drums ( 9 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Cable joint sets ➤ Casting resin and cable sleeves ( 11 )
- Electrics ➤ Installation ➤ Grounding Systems ➤ Lightning protection material ( 5 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 1 )
- Electrics ➤ Installation ➤ Securing material ➤ NH fuses and accessories ( 1 )
- Electrics ➤ Installation ➤ Terminals ➤ Cable lugs, connectors, blank - isolated ( 268 )
- Light & Sound ➤ Light Systems ➤ Downlights ➤ Downlights for NV ( 2 )
- Light & Sound ➤ Light Systems ➤ Living Room Lamps ➤ Recessed lighting ( 1 )
- Light & Sound ➤ Light Systems ➤ Pocket Lamps ( 1 )
- Electronics ➤ Measurement ➤ Cable Testers ( 1 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- Electronics ➤ Measurement ➤ Multimeters ( 1 )
- Electronics ➤ Measurement ➤ Other Measuring Devices ( 15 )
- Electronics ➤ Measurement ➤ Testers ( 1 )
- Electronics ➤ Measurement ➤ Voltage Measurement ( 2 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 7 )
- Technology ➤ Security Technology ➤ Sensors ➤ Fire & Gas Detectors ( 1 )
- Technology ➤ Tools ➤ Cable Drum Uncoilers ( 9 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 87 )
- Technology ➤ Tools ➤ Drills ( 163 )
- Technology ➤ Tools ➤ Knifes ( 42 )
- Technology ➤ Tools ➤ Ladders ( 6 )
- Technology ➤ Tools ➤ Miscellaneous ( 850 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 6 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Step & Taper Drills ( 13 )
- Technology ➤ Tools ➤ Power Tools ➤ Automotive ( 1 )
- Technology ➤ Tools ➤ Punches ( 2 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Head Protection ( 4 )
- Technology ➤ Tools ➤ Saws ( 13 )
- Technology ➤ Tools ➤ Screwdrivers ( 120 )
- Technology ➤ Tools ➤ Soldering Tools ➤ Soldering Accessories ( 7 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 47 )
- Technology ➤ Tools ➤ Wrenches ( 201 )
 |
 Cimco 132860 132860Cimco 132860 screw hole punch square 46.0x46.0mm nominal size pre-drilling D20mmSquare screw hole punch, patented die, with side ejection for the waste piece. Suitable for: sheet steel (ST 37), plastic and aluminum. Operation: hydraulic. Design: with stamp, Suitable for: sheet ... Lieske Part No.: 1013260 Mfg Part No: 132860 |
781,75 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132861Cimco 132861 screw punch square VA, 46,0x46,0 Square screw punch - VA, patented die: With side ejection for the waste piece. Suitable for: Stainless steel (VA) and sheet steel (ST 37). Operation: Hydraulic. Design: With stamp, die suitable for: ... Lieske Part No.: 856843 Mfg Part No: 132861 |
1.348,80 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132864Cimco 132864 square screw punch, 68,0x68,0mm Square screw hole punch, patented die, with side ejection for the waste piece. Suitable for: sheet steel (ST 37), plastic and aluminum. Operation: hydraulic. Design: with stamp, Suitable for: sheet ... Lieske Part No.: 640567 Mfg Part No: 132864 |
1.052,87 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132866Cimco 132866 square screw punch, 92,0x92,0mm Square screw hole punch, patented die, with side ejection for the waste piece. Suitable for: sheet steel (ST 37), plastic and aluminum. Operation: hydraulic. Design: with stamp, Suitable for: sheet ... Lieske Part No.: 852453 Mfg Part No: 132866 |
1.306,53 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132867Cimco 132867 screw punch square VA, 92,0x92,0mm predrilling D30mm Square screw punch - VA, patented die: With side ejection for the waste piece. Suitable for: Stainless steel (VA) and sheet steel (ST 37). Operation: Hydraulic. Design: With stamp, die suitable for: ... Lieske Part No.: 301201 Mfg Part No: 132867 |
2.521,80 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132870Cimco 132870 132,870 square screw punch, 138,0x138,0mm nominal size Pilot hole-D30mm Square screw hole punch, patented die, with side ejection for the waste piece. Suitable for: sheet steel (ST 37), plastic and aluminum. Operation: hydraulic. Design: with stamp, Suitable for: sheet ... Lieske Part No.: 151446 Mfg Part No: 132870 |
2.245,31 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132924Cimco 132924 screw punch Sub-Min-D, 9-pin 20x11,9mm nominal size Pilot hole-D10mm Sub-Min-D screw punch, patented die with side ejection for the waste piece. Suitable for sheet steel (ST 37) and stainless steel (VA). Operation: Manual and hydraulic. Design: For multiple connectors, ... Lieske Part No.: 965208 Mfg Part No: 132924 |
508,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132926Cimco 132926 screw punch Sub-Min-D, 15-pin Sub-Min-D screw punch, patented die with side ejection for the waste piece. Suitable for sheet steel (ST 37) and stainless steel (VA). Operation: Manual and hydraulic. Design: For multiple connectors, ... Lieske Part No.: 228783 Mfg Part No: 132926 |
552,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132954Cimco 132954 special screw punch 132 954, 6-pin Screw punch special for heavy connectors, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 820332 Mfg Part No: 132954 |
910,61 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132956Cimco 132956 screw punch special, 10-pin Special screw punch for heavy connectors, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 336384 Mfg Part No: 132956 |
985,10 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132958Cimco 132958 special screw punch , 16-pin Screw punch special for heavy connectors, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 603619 Mfg Part No: 132958 |
1.107,24 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132960Cimco 132960 screw punch special, 24-pin Screw punch special for heavy connectors, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 790745 Mfg Part No: 132960 |
1.301,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132964Cimco 132964 stamp 10-pin 65,0x36,0mm, Accessories for screw punch special stamp, size: 65.0x36.0 mm Lieske Part No.: 293306 Mfg Part No: 132964 |
652,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132966Cimco 132966 punch 16 pol 86,0x36,0mm Accessories for screw punch special stamp, size: 86.0x36.0 mm Lieske Part No.: 937559 Mfg Part No: 132966 |
753,58 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132968Cimco 132968 stamp 24-pin 112,0x36,0mm, Accessories for screw punch special stamp, size: 112.0x36.0 mm Lieske Part No.: 302344 Mfg Part No: 132968 |
775,04 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132972Cimco 132972 die 10-pin 65,0x36,0mm, Accessories for screw punch special die, size: 65.0x36.0 mm Lieske Part No.: 454299 Mfg Part No: 132972 |
739,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132974Cimco 132974 132,974 die 16-pin 86,0x36,0mm, Accessories for screw punch special die, size: 86.0x36.0 mm Lieske Part No.: 628601 Mfg Part No: 132974 |
900,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132976Cimco 132976 female mold 24pin 112,0x36,0mm Accessories for screw punch special die, size: 112.0x36.0 mm Lieske Part No.: 956999 Mfg Part No: 132976 |
962,28 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132984Cimco 132984 screw hole punch special VA 16-pole 86x36mm nominal size pre-drilling D24mm Screw punch special for heavy connectors - VA, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 292234 Mfg Part No: 132984 |
1.719,21 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132986Cimco 132986 screw hole punch special VA 24-pin 112x36mm nominal size pre-drilling D24mm Screw punch special for heavy connectors - VA, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 292188 Mfg Part No: 132986 |
2.010,45 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133000Cimco 133000 CIM Schraubl. set diamond 5-pc., Diamond screw punch sets, 5 pieces in various sizes. Suitable for: sheet steel (ST 37), plastic and aluminum. Manual and hydraulic operation. Design: consisting of splitting punches and dies. Stored ... Lieske Part No.: 105534 Mfg Part No: 133000 |
334,16 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133002Cimco 133002 screw punch set diamond , 7-Piece Diamond screw punch sets, 7 pieces in various sizes. Suitable for sheet steel (ST 37), plastic and aluminum. Manual and hydraulic operation. Design: consisting of splitting punches and dies. Stored in ... Lieske Part No.: 196248 Mfg Part No: 133002 |
677,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133004Cimco 133004 screw punch-set diamond, VA 5 pcs Screw punch sets diamond - VA. Screw punch sets consisting of splitting punches and dies. 5-piece in different sizes. Suitable for stainless steel (VA), sheet steel (ST 37), plastic and aluminum. Lieske Part No.: 502643 Mfg Part No: 133004 |
1.016,63 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133006Cimco 133006 screw punch-set diamond, VA 7 pcs Screw punch sets Diamond screw punch sets consisting of splitting punches and dies. 7 pieces in different sizes. Suitable for stainless steel (VA), sheet steel (ST 37), plastic and aluminum. Manual ... Lieske Part No.: 285251 Mfg Part No: 133006 |
1.622,57 EUR
plus delivery charges
Delivery time on requestinfo_outline
|