Products of Cimco
Categories with products from Cimco
- Electronics ➤ Energy ➤ Extensions / cable drums ( 9 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Cable joint sets ➤ Casting resin and cable sleeves ( 11 )
- Electrics ➤ Installation ➤ Grounding Systems ➤ Lightning protection material ( 5 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 1 )
- Electrics ➤ Installation ➤ Securing material ➤ NH fuses and accessories ( 1 )
- Electrics ➤ Installation ➤ Terminals ➤ Cable lugs, connectors, blank - isolated ( 268 )
- Light & Sound ➤ Light Systems ➤ Downlights ➤ Downlights for NV ( 2 )
- Light & Sound ➤ Light Systems ➤ Pocket Lamps ( 1 )
- Electronics ➤ Measurement ➤ Cable Testers ( 1 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- Electronics ➤ Measurement ➤ Multimeters ( 1 )
- Electronics ➤ Measurement ➤ Other Measuring Devices ( 14 )
- Electronics ➤ Measurement ➤ Testers ( 1 )
- Electronics ➤ Measurement ➤ Voltage Measurement ( 2 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 7 )
- Technology ➤ Security Technology ➤ Sensors ➤ Fire & Gas Detectors ( 1 )
- Technology ➤ Tools ➤ Cable Drum Uncoilers ( 9 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 87 )
- Technology ➤ Tools ➤ Drills ( 162 )
- Technology ➤ Tools ➤ Knifes ( 40 )
- Technology ➤ Tools ➤ Ladders ( 6 )
- Technology ➤ Tools ➤ Miscellaneous ( 832 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 6 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Step & Taper Drills ( 13 )
- Technology ➤ Tools ➤ Power Tools ➤ Automotive ( 1 )
- Technology ➤ Tools ➤ Punches ( 2 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Head Protection ( 4 )
- Technology ➤ Tools ➤ Saws ( 13 )
- Technology ➤ Tools ➤ Screwdrivers ( 120 )
- Technology ➤ Tools ➤ Soldering Tools ➤ Soldering Accessories ( 7 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 45 )
- Technology ➤ Tools ➤ Wrenches ( 198 )
 |
 Cimco 132870Cimco 132870 132,870 square screw punch, 138,0x138,0mm nominal size Pilot hole-D30mmSquare screw hole punch, patented die, with side ejection for the waste piece. Suitable for: sheet steel (ST 37), plastic and aluminum. Operation: hydraulic. Design: with stamp, Suitable for: sheet ... Lieske Part No.: 151446 Mfg Part No: 132870 |
2.245,31 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132924Cimco 132924 screw punch Sub-Min-D, 9-pin 20x11,9mm nominal size Pilot hole-D10mm Sub-Min-D screw punch, patented die with side ejection for the waste piece. Suitable for sheet steel (ST 37) and stainless steel (VA). Operation: Manual and hydraulic. Design: For multiple connectors, ... Lieske Part No.: 965208 Mfg Part No: 132924 |
508,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132926Cimco 132926 screw punch Sub-Min-D, 15-pin Sub-Min-D screw punch, patented die with side ejection for the waste piece. Suitable for sheet steel (ST 37) and stainless steel (VA). Operation: Manual and hydraulic. Design: For multiple connectors, ... Lieske Part No.: 228783 Mfg Part No: 132926 |
552,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132954Cimco 132954 special screw punch 132 954, 6-pin Screw punch special for heavy connectors, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 820332 Mfg Part No: 132954 |
910,61 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132956Cimco 132956 screw punch special, 10-pin Special screw punch for heavy connectors, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 336384 Mfg Part No: 132956 |
985,10 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132958Cimco 132958 special screw punch , 16-pin Screw punch special for heavy connectors, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 603619 Mfg Part No: 132958 |
1.107,24 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132960Cimco 132960 screw punch special, 24-pin Screw punch special for heavy connectors, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 790745 Mfg Part No: 132960 |
1.301,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132964Cimco 132964 stamp 10-pin 65,0x36,0mm, Accessories for screw punch special stamp, size: 65.0x36.0 mm Lieske Part No.: 293306 Mfg Part No: 132964 |
652,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132966Cimco 132966 punch 16 pol 86,0x36,0mm Accessories for screw punch special stamp, size: 86.0x36.0 mm Lieske Part No.: 937559 Mfg Part No: 132966 |
753,58 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132968Cimco 132968 stamp 24-pin 112,0x36,0mm, Accessories for screw punch special stamp, size: 112.0x36.0 mm Lieske Part No.: 302344 Mfg Part No: 132968 |
775,04 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132972Cimco 132972 die 10-pin 65,0x36,0mm, Accessories for screw punch special die, size: 65.0x36.0 mm Lieske Part No.: 454299 Mfg Part No: 132972 |
739,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132974Cimco 132974 132,974 die 16-pin 86,0x36,0mm, Accessories for screw punch special die, size: 86.0x36.0 mm Lieske Part No.: 628601 Mfg Part No: 132974 |
900,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132976Cimco 132976 female mold 24pin 112,0x36,0mm Accessories for screw punch special die, size: 112.0x36.0 mm Lieske Part No.: 956999 Mfg Part No: 132976 |
962,28 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132984Cimco 132984 screw hole punch special VA 16-pole 86x36mm nominal size pre-drilling D24mm Screw punch special for heavy connectors - VA, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 292234 Mfg Part No: 132984 |
1.719,21 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 132986Cimco 132986 screw hole punch special VA 24-pin 112x36mm nominal size pre-drilling D24mm Screw punch special for heavy connectors - VA, patented die: With side ejection for the waste piece. Drilling position is pre-stamped by means of punch mandrels through the die: Punch mandrels can be ... Lieske Part No.: 292188 Mfg Part No: 132986 |
2.010,45 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133000Cimco 133000 CIM Schraubl. set diamond 5-pc., Diamond screw punch sets, 5 pieces in various sizes. Suitable for: sheet steel (ST 37), plastic and aluminum. Manual and hydraulic operation. Design: consisting of splitting punches and dies. Stored ... Lieske Part No.: 105534 Mfg Part No: 133000 |
334,16 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133002Cimco 133002 screw punch set diamond , 7-Piece Diamond screw punch sets, 7 pieces in various sizes. Suitable for sheet steel (ST 37), plastic and aluminum. Manual and hydraulic operation. Design: consisting of splitting punches and dies. Stored in ... Lieske Part No.: 196248 Mfg Part No: 133002 |
677,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133004Cimco 133004 screw punch-set diamond, VA 5 pcs Screw punch sets diamond - VA. Screw punch sets consisting of splitting punches and dies. 5-piece in different sizes. Suitable for stainless steel (VA), sheet steel (ST 37), plastic and aluminum. Lieske Part No.: 502643 Mfg Part No: 133004 |
1.016,63 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133006Cimco 133006 screw punch-set diamond, VA 7 pcs Screw punch sets Diamond screw punch sets consisting of splitting punches and dies. 7 pieces in different sizes. Suitable for stainless steel (VA), sheet steel (ST 37), plastic and aluminum. Manual ... Lieske Part No.: 285251 Mfg Part No: 133006 |
1.622,57 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133008Cimco 133008 screw hole punch sets diamond 11 pieces Diamond screw punch sets, 11 pieces in various sizes. Suitable for sheet steel (ST 37), plastic and aluminum. Manual and hydraulic operation. Design: consisting of splitting punches and dies. Stored ... Lieske Part No.: 352390 Mfg Part No: 133008 |
616,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133010Cimco 133010 screw punch-set diamond, 13-pc Diamond screw punch sets, 13 pieces in various sizes. Suitable for sheet steel (ST 37), plastic and aluminum. Manual and hydraulic operation. Design: consisting of splitting punches and dies. Stored ... Lieske Part No.: 519457 Mfg Part No: 133010 |
868,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133012Cimco 133012 CIM Schraubl. set diamond 12-pc., Screw punch sets Diamond 12-piece screw punch sets including hand punch and accessories. Optionally with a straight hand punch or a 90° angled hand punch. Suitable for sheet steel (ST 37), plastic ... Lieske Part No.: 154282 Mfg Part No: 133012 |
1.235,91 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133014Cimco 133014 CIM Schraubl. set diamond 12-pc., Screw punch sets Diamond 12-piece screw punch sets including hand punch and accessories. Optionally with a straight hand punch or a 90° angled hand punch. Suitable for sheet steel (ST 37), plastic ... Lieske Part No.: 315966 Mfg Part No: 133014 |
1.450,24 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 133016 133016Cimco 133016 screw hole punch sets diamond VA 12 pieces contains hydraulic straight Screw punch sets Diamond 12-piece screw punch sets including hand punch and accessories. Optionally with a straight hand punch or a 90° angled hand punch suitable for stainless steel (VA), sheet ... Lieske Part No.: 1983814 Mfg Part No: 133016 |
1.826,57 EUR
plus delivery charges
Delivery time on requestinfo_outline
|