ALLNET (Akuvox C319) Touch Display Tablet DS10 10 inch PoE with 4GB/16GB, Android, SIP, WLAN

The ALLNET DS10 is a special display for integration into telephone systems and door stations. The SIP integration makes it possible to integrate the display as a telephone in a PBX, e.g. Fritz Box, 3CX etc. It is also possible to configure the display as a PBX.
This means you can use it yourself as a telephone system for telephony. Another special feature is the possibility of storing action URLs as buttons. This makes it possible to call the elevator or operate a door opener. 2 built-in relays can also be controlled to implement further switching processes. The built-in SOS function is particularly suitable for older people. It is possible to store several telephone numbers which can be called at the same time.
*Playstore installation via external APP for integration into home automation solutions and flexible use possible, automatic display switch-off and touch to wake function
Update firmware: Download firmware and install it using the update function in the backend.
Technical DetailsFront panel: Plastic RAM / ROM: 4GB / 16GB Display: 10 Inch IPS LCD Screen: 10 Inch capacitive touch screen Wi-Fi: IEEE802.11 b/g/n, @2.4GHz BLE: Support BLE 4.2 Camera: no camera Memory slot:1 Micro SD slot RS485 port: Support Relays out: 2 Bell in: 1 Microphone: -26dB Speaker: Dual speakers, 4O / 3W Ethernet ports: 1xRJ45, 10/100Mbps adaptive 802.3af Power-over-Ethernet 12V DC connector (if not using PoE) Tamper resistant: Support Installation: Wall-mounted Dimension: 251x182.5x29.75mm Working Humidity: 10~90 Working Temperature: -10°C ~ +45°C Storage Temperature: -20°C ~ +70 °C Touch Screen DisplayDisplay Mode: Normally black, Transmissive LCD Size: 10inch (Diagonal) Aspect Ratio: 16:10 Resolution: 1280x800 Contrast ratio: 900:1 Luminance: 350 cd/m² Viewing Angle: 80° Left, 80° Right, 80° Upper, 80° Lower Touch Screen: Projected capacitive AudioSIP v1 (RFC2543), SIP v2 (RFC3261) Narrowband audio codec: G.711a, G.711µ, G.729 Broadband audio codec: G.722 DTMF: In-band , out-of-band DTMF (RFC2833), SIP Info Echo Cancellation Comfort Noise Generator Automatic Gain Control VideoStreaming formats: H.263 NetworkingProtocols support: IPv4, IPv6, HTTP, HTTPS, FTP, TFTP, SNMP, DNS, SNTP, RTSP, SRTP, RTP, TCP, UDP, TLS, ICMP, DHCP, ARP Deployment Auto-Provisioning Web management portal Web-based packet dump Configuration backup / restore Firmware upgrade System logs (include door access logs) *Playstore Installation: The installation of the Google Framework takes place via an installation APP. The installation takes a lot of time. The Google Files will update automatically after installation. This can take up to several hours.