ABB 2CSR275189R1255 DS201MA-B25 A30 FI/LS switch 110V 10kA 1P+N B 25A 30mA
|
172,90 EUR |
|||||||||||
|
( 205,75 EUR incl. VAT ) ≈ £144.72 | ≈ $190.02 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 665434 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 2CSR275189R1255 | ||||||||||
| UPC/EAN: | 8012542595519 | ||||||||||
| Weight: | 0.2 kg | ||||||||||
| Type: | DS201 M B25 A30 110V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for ABB 2CSR275189R1255:
Applications
The switch is primarily intended for use in commercial and industrial installations where combined protection against electrical hazards is required. It protects against indirect contact (fault protection) and provides additional protection against fires caused by electrical faults. The application is in single-phase circuits, with an operating voltage ranging from 110 V AC to 230 V AC. The protection functions are designed for installations operating in environments with an ambient temperature up to 55 °C.
Functions and Equipment in Detail
The FI/LS switch is protected on 1 pole (LS) and switching on 2 poles, with the neutral conductor switching simultaneously. The rated voltage is 240 V, and the rated insulation voltage Ui is 500 V. The rated current is 25 A, and the rated residual current is 30 mA. The residual current type is A, meaning it can also detect pulsating fault currents with a direct current component. The tripping characteristic is instantaneous, and the release characteristic corresponds to type B, suitable for typical consumer loads. The energy limitation class is 3, ensuring limited energy release during switching off.
Technology Explained Simply
The switch combines the functions of a load switch (LS) and a residual current switch (FI) in one device. It disconnects the circuit when the current exceeds the rated current (25 A) (overload protection) or when a short circuit occurs. Additionally, it detects fault currents from 30 mA, indicating insulation damage or contact to earth. The rated breaking capacity is 10 kA according to EN 61009 and 15 kA according to IEC 60947-2, with the rated short-circuit making capacity Icn according to EN 61009-1 also being 10 kA. The protection class IP20 protects against finger contact and solid foreign objects, but not against water or dust. The overvoltage category 3 and pollution degree 2 indicate an operating environment where moderate overvoltages and low pollution levels may occur.
Compatibility and Accessories
Various accessories are available for this switch, extending its functionality. These include the Si-automat S200 B+ LS S2C-H6-20R, which can function as an additional load switch, as well as auxiliary switches such as the S2C-S/H6R (1 changeover contact) and the LS S2C-H6-11R. These components enable expansion of control and monitoring functions in complex installations. Mounting is on a DIN rail, with an installation depth of 69 mm and a width of 2 module units. The maximum cross-section for stranded conductors is 16 mm².
Mounting and Installation
The switch is mounted on a DIN rail, enabling standardized and secure installation in enclosures. The installation depth of 69 mm must be considered when planning the enclosure depth. The power dissipation is 8.1 W, which is relevant for thermal planning of the enclosure environment. Mounting is done without additional interlocking devices, simplifying installation, although it does not allow for mechanical interlocking between switches.
Advantages in Operation
The combined protection provided by the FI/LS switch reduces the number of devices required in enclosure planning and lowers installation costs. The instantaneous tripping at fault currents increases operational safety. The type A detection enables use in installations with electronic devices that generate pulsating fault currents. The approvals from various countries facilitate use in international projects. The rated switching capacity of 10 kA (IEC/EN 61009) is sufficient for typical industrial applications.
| General | |
| Number of poles (total) | 2 |
| Number of protected poles | 1 |
| Rated voltage | 240 |
| Rated insulation voltage Ui | 500 |
| Rated impulse withstand voltage Uimp | 4 |
| Rated current | 25 |
| Rated fault current | 0.03 |
| Leakage current type | A |
| Current limiting class | 3 |
| Rated short-circuit breaking capacity acc. EN 61009 | 10 |
| Rated short-circuit breaking capacity IEC 60947-2 | 15 |
| Rated short-circuit breaking capacity Icn acc. EN 61009-1 | 10 |
| Disconnection characteristic | Undelayed |
| Voltage type | AC |
| Frequency | Other |
| Release characteristic | B |
| Over voltage category | 3 |
| Pollution degree | 2 |
| Ambient temperature during operating | 55 |
| Width in number of modular spacings | 2 |
| Built-in depth | 69 |
| Degree of protection (IP) | IP20 |
| Connectable conductor cross section multi-wired | 16 |
| Mounting method | DIN rail |
| Power loss | 8.1 |
| Concurrently switching N-neutral | |
| With interlocking device | |
| Anti-nuisance tripping version | |
Questions & answers
What is the delivery time of ABB 2CSR275189R1255 DS201MA-B25 A30 FI/LS switch 110V 10kA 1P+N B 25A 30mA ?
The article ABB 2CSR275189R1255 DS201MA-B25 A30 FI/LS switch 110V 10kA 1P+N B 25A 30mA is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of ABB 2CSR275189R1255 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you ABB 2CSR275189R1255 DS201MA-B25 A30 FI/LS switch 110V 10kA 1P+N B 25A 30mA always at the best possible price. We can give you a discount of 2% on ABB 2CSR275189R1255 DS201MA-B25 A30 FI/LS switch 110V 10kA 1P+N B 25A 30mA if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of ABB 2CSR275189R1255 DS201MA-B25 A30 FI/LS switch 110V 10kA 1P+N B 25A 30mA we can offer you a price of 169,01 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for ABB 2CSR275189R1255 DS201MA-B25 A30 FI/LS switch 110V 10kA 1P+N B 25A 30mA
|
ABB 2CDS200946R0001 LS S2C-H6-11R auxiliary switch
The ABB circuit breaker auxiliary switch type S2C-H6-11R is a plug-in device for indicating the switching position of circuit breakers. It is specifically designed for right-side mounting on ...Lieske Part No.: 208094 Mfg Part No: 2CDS200946R0001 Type: S2C-H6-11R |
26,98 EUR
![]() ≈ £22.58 | ≈ $29.65
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
ABB 2CDS200946R0002 Si-automat S200 B+ LS S2C-H6-20R
The product is an auxiliary switch from manufacturer ABB, type S2C-H6-20R, specifically designed for right-side mounting on circuit breakers. It provides visual indication of the contact position of ...Lieske Part No.: 231569 Mfg Part No: 2CDS200946R0002 Type: S2C-H6-20R |
26,98 EUR
![]() ≈ £22.58 | ≈ $29.65
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
ABB 2CDS200922R0001 S2C-S/H6R auxiliary switch 1 changeover for LS and FI
The ABB auxiliary switch type S2C-S/H6R, manufacturer's number 2CDS200922R0001, is a signal contact for right-side mounting on various switching devices. It is used to monitor the switching position ...Lieske Part No.: 725715 Mfg Part No: 2CDS200922R0001 Type: S2C-S/H6R |
32,77 EUR
![]() ≈ £27.43 | ≈ $36.01
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|





