EonStor A12E-G2121-25 Raid System content_copy

Controller Single

• Cache Speicher 256-2048 MB DDR
• Istallierter Speicher 512 MB DDR
• Prozessor PowerPC 750FX-600
• RAID-Engine: 500266
• RAID-Level: 0, 1(0+1), 3, 5, 6, 30, 50, 60
• Datentransfer bis zu 1Gbit/s pro Port
• Host-Interface 2x 1Gbit
iSCSI

• Festplatten-Interface: 3Gbit/s SATA
• Festplatten hot-swappable bis zu 12x 8,9 cm ( 3,5 inch )
• Batterriegepufferter Cache optional
• Netzteile, redundant 2x 350W redundant
• Abmessungen 482 x 88 x 490mm (HxBxT) - 2HE

The EonStor A12E-G2121 provides cost-effective storage by combining Infortrend's sophisticated RAID technology with iSCSI protocol that encapsulates SCSI data blocks and carries them over standard Ethernet infrastructures. Access to its storage volumes is made with connectivity of two 1Gbit/sec Ethernet (GbE) ports via familiar Gigabit Ethernet using standard copper cabling or point-to-point to application hosts.
The A12E storage array is ideal for building a shared storage pool for disk-to-disk volume distribution, backup, storage consolidation, and replication of data among networked servers. The storage array operates with the advantages of iSCSI protocol in terms of its block-based performance, lower training and maintenance costs without the complexity of other networking technologies such as Fibre Channel.
The EonStor A12E-G2121 is built around Infortrend's next-generation, custom-built ASIC266 XOR engine.
High Performance
Featuring a 64-bit 133MHz data bus, the subsystem's high data throughput is more than sufficient for small-to-medium sized servers or workstations. Robust functionality and adaptive algorithms facilitate chip-level operation that is already fast and flexible. For example, a timeout can be configured for individual drive response time. If a specific disk drive fails to respond in time, the firmware accumulates data from the adjacent stripes of the array to satisfy applications that require fast return of data.
These adaptive designs assure sufficient throughput for a wide range of applications running on Windows 2000/2003/XP, Linux, or Unix-based servers. Ideal applications include Disk-to-Disk backup, small business network, storage consolidation and others.
Enclosure Management
The EonStor A12E-G2121 subsystem incorporates massive storage capacity in a safe environment where a variety of hardware and firmware mechanisms ensure the highest level of data availability. In addition to RAID protection for the disk drives, the PSUs and cooling modules come implemented as redundant/hot-swappable modules. Even the battery module can be replaced online.
The rotation speed of the enclosure's dual-speed fans is controlled by the firmware. In critical conditions, e.g., PSU or fan failure, the fan rotation speed is raised to a higher level. Control over caching behaviors is a user-configurable option. In the event of component failures, such as UPS failure or low battery charge, the firmware stops caching write requests in cache memory.
Task scheduler
Media Scan is now armed with a unique function that helps repair media errors on drives. By combining the Task Scheduler with Media Scan, the scanning operation can be scheduled to begin at a specified start time and repeated at configured intervals. This hands-free operation allows each such schedule to be defined to operate on individual hard drives, all drives of a certain class, all member drives of a specified logical drive, or all member drives of all logical drives.
Features and Benefits

Shared storage over standard Ethernet networks
Compliant with IETF iSCSI standard (RFC 3720)
Microsoft Windows Server 2003 Virtual Disk Service (VDS) compatibility via Infortrend hardware provider
CHAP authentication security
12 drive bays for 3Gbit/sec, SATA-II disk drives
Storage volumes presented via SCSI-like ID/LUN mapping as iSCSI targets
Jumbo Frame support
High density 2U chassis
Optional BBU for protection of cached data
Dual-speed fans to reduce system noise
Real-time event notification by a variety of methods
-------------------------------------
Technical Specifications
Model: Infortrend EonStor A12E-G2121-25
Host-Interface: 2x Gigabit Ethernet, iSCSI
------------------------------------
Hardware
Controller: single
RAID Controller: 600MHz RISC processor with 512KB embedded L2 cache
RAID Engine: ASIC266
Battery Backup: optional
Cache Memory: 512MB~2048MB DDR RAM (512 MB installed)
Disk Interface: SATA II (3Gbit/s)
Harddisk Drives: up to 12x 3.5 LFF SATA II, hot swappable
Rails: optional
Hot Swap Fan Modules 3
Power Supply: 2x 460W, redundant, hot-swappable
AC Input Voltage: 100/240 V (± 10%), 47~63Hz
-------------------------------------
Management
Front Panel LCD and Buttons: easy access for configuration and status report
RS-232 Terminal: Command Line Interface (CLI) for configuration and status report
Management: RAIDWatch manager software for all major platforms via Ethernet port
Event Notification: Build-in buzzer, SNMP trap
Operating Systems
Supported OS: OS independent
--------------------------------------
RAID
RAID Level: 0, 1 (0+1), 3, 5, 10, 30, 50, JBOD
RAID Features: Multiple arrays configurable with dedicated or global hot spares
Online expansion: Adding new drives, copying and replacing drives with drives of larger capacity, automatic background rebuilds, configurable stripe size and write policy per array

Environment Specification
Humidity: 5%~95%, non-condensing
Operating Temperature: 0°C~40°C
----------------------------------
Dimension and Weight
Physical Dimensions/mm (Width x Height x Depth): 482 x 88 x 505 (with handles), 2U RM
Weight (without drives): 23.5kg
Gross weight (without drives): 25kg
----------------------------------
Service
Warranty: 3 years
Service: optional