Zander Aachen SR3A 115V 50-60Hz Safety switching device

SR3D Safety Control Device – Universal, Safe, and Reliable

The SR3D is a universal safety control device with three safe relay outputs that ensures the fast and safe shutdown of moving parts of a machine or system in the event of danger. It is specifically designed for use in continuous operation of firing systems in accordance with EN 50156-1 and EN 746-2, as well as for use on ships, for which it has been certified by TÜV Rheinland and Germanischer Lloyd.

---

### Key Features of the SR3D

• Two start modes available:
- Monitored manual start
- Automatic start

• Cross-fault and ground-fault monitoring
• Use up to PL e, SILCL 3, Category 4 – Meets the highest safety requirements

---

### Technical Functions of the SR3D

• 3 safe relay outputs (redundant and diverse)
• 1 auxiliary contact (signal contact) for status indication
• Force-guided relays for maximum operational safety
• Cyclic monitoring of relay contacts – Ensures that the safety function is maintained even in the event of internal faults
• Feedback circuit to monitor downstream contactors or expansion modules
• Status display via LED – Clear visualization of the switching states

---

### Connection Options
The SR3D allows direct connection of the following devices:

• Emergency stop buttons
• Safety switches
• Contactless safety switches
• Safety components with OSSD outputs

This flexibility makes the SR3D ideal for a wide range of machines and systems requiring diverse safety requirements.

---

### Application Areas of the SR3D

• Emergency stop circuits (single- or dual-channel)
• Protective guard monitoring on machines and systems
• Control of firing systems
• Ship applications (certified by Germanischer Lloyd)

---

### Safety Functions in Detail
The SR3D guarantees the safe separation of safety circuits in accordance with EN 60204-1, enabling a safety stop function up to PL e / SIL 3 in accordance with EN ISO 13849-1 and IEC 61508.

• Standard-compliant shutdown: When an emergency stop button is pressed, the release paths are immediately opened, and the machine is safely shut down.
• Redundant relays: Even if one relay fails, the function is maintained, as the cyclic self-monitoring detects and addresses errors.

---

### Mounting Instructions
For flawless operation, the following guidelines must be observed:

• Mounting on a 35 mm DIN rail according to EN 60715 TH35
• Minimum protection class IP54 – Must be installed in control cabinets with sufficient heat dissipation
• Distance from adjacent devices: For the AC 115 V / 230 V variant, a distance of at least 10 mm from adjacent devices must be maintained.

---

### Certificates and Conformity

• EN ISO 13849-1 – Functional safety up to PL e
• EN 50156-1 – Safety of firing systems
• Germanischer Lloyd certificate – Approved for use on ships