Zander Aachen S2HC AC 230V Two-hand control relay

Safety Control Device SR3D – Flexible Safety Relay with Three Secure Relay Outputs

The SR3D is a universally applicable safety control device that enables the safe shutdown of moving machine parts in hazardous situations. With its three secure, redundant, and diverse relay outputs, it ensures the fast and reliable stoppage of machines and systems. The SR3D is ideal for single- or dual-channel emergency stop circuits as well as for the monitoring of protective guards on machinery.

Specifically designed for use in combustion systems in accordance with EN 50156-1 and EN 746-2, as well as for use on ships, the device meets the highest safety standards. Certifications from TÜV Rheinland and Germanischer Lloyd confirm compliance with international safety standards.

Technical Data:

• Safety Certifications:
- Certified up to PL e, Category 4, SILCL 3 according to EN ISO 13849-1 and IEC 61508
- Type-tested for combustion systems according to EN 50156-1 and EN 746-2
- Certified by TÜV Rheinland and Germanischer Lloyd


• Inputs and Outputs:
- 3 secure, redundant, and diverse relay outputs
- 1 auxiliary contact (signal contact) for monitoring the status of the relays


• Operating Modes:
- Single-channel or dual-channel operation
- Connection of:
- Emergency stop buttons
- Safety switches
- Contactless safety switches
- Safety components with OSSD outputs (Output Signal Switching Device)


• Monitoring Functions:
- Feedback loop for monitoring downstream contactors or extension modules
- Cyclical monitoring of output contacts
- Self-monitoring detects errors during the next request of the safety function
- Single faults do not result in the loss of the safety function
- Status display via LED


• Housing and Design:
- Housing width: Compact design for mounting on a 35 mm DIN rail (EN 60715 TH35)
- Protection class: At least IP54 when installed in a control cabinet


• Installation Notes:
- Mounting on 35 mm DIN rail (EN 60715 TH35)
- Ensure adequate heat dissipation in the control cabinet
- For the AC 115 V / 230 V variant, a minimum distance of 10 mm from neighboring devices must be maintained
- Recommended distance holders: ZANDER AACHEN (Part No. 472596) to maintain defined distances


Functions:



• Monitoring and Safe Shutdown:
- The SR3D monitors the status of the emergency stop circuit (e.g., safety door or emergency stop button).
- When the emergency stop circuit is closed, the machine is enabled.
- If the safety function is requested (e.g., by opening the safety door), the SR3D immediately interrupts the release paths, ensuring the machine is safely shut down.


• Self-Monitoring:
- The SR3D detects errors through cyclical self-monitoring.
- Errors are detected no later than during the next request of the safety function, ensuring that single faults do not result in the loss of the safety function.


Scope of Delivery:



• 1x Safety Control Device SR3D
• Connection instructions
• Warranty documents