Zander Aachen 941155 ZCode-LR Safety Switch, RFID Unicode, M12
|
on request |
|
| Delivery time on requestinfo_outline | |
| Lieske Part No.: | 439778 |
|---|---|
| Mfg Part No: | 941155 |
| Weight: | 0.2 kg |
Further Safety relay from Zander AachenFurther products in category Safety relay
All products of Zander Aachen
Product information for Zander Aachen 941155:
ZCode-LR: Tamper-Proof, Contactless Safety Switch with RFID and Magnetic Technology
The ZCode-LR is a tamper-proof, contactless safety switch that combines magnetic and RFID technology. This dual-channel and diversified principle offers maximum protection against tampering. Activation can only be performed by the corresponding actuator, preventing unauthorized manipulation.
The high-quality plastic housing allows the ZCode-LR to be used in harsh environments, such as dusty, hot, or humid areas. Thanks to its IP67 and IP69K protection ratings, the switch is fully encapsulated, making it both dustproof and waterproof. The ZCode-LR can be mounted behind stainless steel and supports four different actuation directions. With a positional offset tolerance of up to 5 mm and a switching distance of up to 10 mm, the switch offers increased flexibility during installation.
The ZCode-LR features two contactless safety outputs and one signal output. It operates with self-monitoring over two channels with cross-circuit monitoring. The device is connected to a safety relay (e.g., ZANDER SR series, MINOS SD series), a safety logic (e.g., ZANDER MINOS SL series), or a safety controller (e.g., ZANDER TALOS series). Up to 20 modules can be connected in series without reducing the safety level.
These two versions enable flexible adaptation to different safety requirements. The ZCode-LR is certified up to PL e, Category 4 according to EN ISO 13849-1 and Type 4 according to ISO 14119.
Type: ZCode-LR Safety Switch
The ZCode-LR is a tamper-proof, contactless safety switch that combines magnetic and RFID technology. This dual-channel and diversified principle offers maximum protection against tampering. Activation can only be performed by the corresponding actuator, preventing unauthorized manipulation.
The high-quality plastic housing allows the ZCode-LR to be used in harsh environments, such as dusty, hot, or humid areas. Thanks to its IP67 and IP69K protection ratings, the switch is fully encapsulated, making it both dustproof and waterproof. The ZCode-LR can be mounted behind stainless steel and supports four different actuation directions. With a positional offset tolerance of up to 5 mm and a switching distance of up to 10 mm, the switch offers increased flexibility during installation.
The ZCode-LR features two contactless safety outputs and one signal output. It operates with self-monitoring over two channels with cross-circuit monitoring. The device is connected to a safety relay (e.g., ZANDER SR series, MINOS SD series), a safety logic (e.g., ZANDER MINOS SL series), or a safety controller (e.g., ZANDER TALOS series). Up to 20 modules can be connected in series without reducing the safety level.
Available versions:
- Unicode: Only a specific corresponding actuator can activate the switch.
- Mastercode: Any actuator from the series can activate the switch.
These two versions enable flexible adaptation to different safety requirements. The ZCode-LR is certified up to PL e, Category 4 according to EN ISO 13849-1 and Type 4 according to ISO 14119.
Technical Details:
- Operating principle: Contactless, tamper-proof safety switch with magnetic and RFID technology
- Protection classes: IP67, IP69K (dustproof and waterproof)
- Actuation directions: 4 possible actuation directions
- Switching distance: Up to 10 mm (recommended distance: 5 mm)
- Offset tolerance: Up to 5 mm in all directions
- Outputs: 2 contactless safety outputs, 1 contactless signal output
- Connection: Two channels with cross-circuit monitoring
- Compatibility: Compatible with safety relays and controllers (e.g., ZANDER SR, MINOS SD, MINOS SL, TALOS)
- Series connection: Up to 20 modules per safety relay or safety logic
- Certifications: PL e, Category 4 according to EN ISO 13849-1, Type 4 according to ISO 14119
- Available versions: Unicode (only a specific actuator can activate the switch) and Mastercode (all actuators in the series can activate the switch)
- Operating environment: Suitable for use in dusty, hot, and humid environments
- Housing material: Robust plastic housing, fully encapsulated
- Durability: Long service life with no mechanically moving parts
Installation Instructions:
- Fastening: Use M4 screws (maximum torque: 2 Nm)
- Mounting: Only on non-magnetic material
- Distance: Minimum distance to adjacent switches: 30 mm
- Switching distance: Recommended distance 5 mm, maximum switching distance 10 mm
- Positioning: Switch and actuator must not touch
- Mechanical load: The switch must not be used as a mechanical stop
- Adjustment: Adjustment with a hammer is not permitted
Scope of Delivery:
- 1x ZCode-LR safety switch
- 1x Actuator (Unicode or Mastercode version)
- 1x Installation manual
Type: ZCode-LR Safety Switch
Questions & answers
What is the delivery time of Zander Aachen 941155 ZCode-LR Safety Switch, RFID Unicode, M12?
The article Zander Aachen 941155 ZCode-LR Safety Switch, RFID Unicode, M12 is currently not in stock und muss auftragsbezogen bestellt werden.
According to our experience the article is ready for dispatch within 8 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Zander Aachen 941155 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Zander Aachen 941155 ZCode-LR Safety Switch, RFID Unicode, M12 always at the best possible price. We can give you a discount of 2% on Zander Aachen 941155 ZCode-LR Safety Switch, RFID Unicode, M12 if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.