Weidmüller 1053260000 WQV 16/2 cross connector for terminals P:2
|
1,19 EUR |
|||||||||||
|
( 1,42 EUR incl. VAT ) ≈ £0.99 | ≈ $1.32 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| In Stock: >500 pieces | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 181606 | ||||||||||
| Mfg Part No: | 1053260000 | ||||||||||
| UPC/EAN: | 4008190036553 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | WQV 16/2 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Weidmüller 1053260000:
The Weidmüller cross connector WQV 16/2 is a component for connecting pass-through terminal blocks in industrial electrical installations. It is used for potential distribution or signal transmission within a terminal row, thereby establishing an electrical connection between adjacent terminals. The connector is specifically designed for terminals with a cross-section of 16 mm² and enables secure and reliable power or signal transmission in enclosures and control systems. It is typically used in conjunction with pass-through terminal blocks to electrically connect multiple terminals without requiring additional wiring or connecting pieces.
Cross connector for pass-through terminal blocks
The WQV 16/2 is a mechanical cross connector inserted into the terminal row to connect adjacent terminals. It is designed for use with terminals supporting a connection cross-section of 16 mm². The "5,1 cm ( 2 inch ) in the type designation WQV 16/2 refers to the number of connected terminals — in this case, two adjacent terminals. The connection is made via direct metallic contact, ensuring low transition resistance. This is particularly important in applications requiring stable potential distribution or signal transmission.
Potential distribution and signal transmission
The connector enables even distribution of an electrical potential across multiple terminals, which is used in control systems for earth or ground connections. It is also suitable for transmitting control signals, e.g. in automation systems, as it establishes a direct electrical connection without additional wiring. Use in pass-through terminal blocks reduces the number of required connecting wires and simplifies installation and maintenance of the system.
Technology explained clearly
The WQV 16/2 consists of a metallic element inserted into the terminal row, connecting the contact surfaces of two adjacent terminals. The design allows it to fit into the designated cutouts of the terminal blocks and is held in place by the mechanical tension of the terminals themselves. It is a passive component without electronic functions; the electrical connection is achieved purely through metallic contact. Use is limited to terminals with a maximum cross-section of 16 mm², as the connector is dimensioned for this cross-section.
Compatibility and accessories
The cross connector is specifically designed for pass-through terminal blocks supporting a connection cross-section of 16 mm². It is compatible with terminal blocks from the Weidmüller product family designed for this cross-section. As suitable accessories, the tool WAW 1 NEUTRAL is offered, which can be used for mounting or dismounting the cross connector. This tool is specifically developed for handling cross connectors in terminal blocks and facilitates installation and removal procedures.
Mounting and installation
Mounting is done by simply inserting the cross connector into the designated cutouts of the terminal blocks. It is placed between two adjacent terminals, where the mechanical tension of the terminals themselves secures the connector. Additional fastening or screw connections are not required. Installation is tool-free, although the tool WAW 1 NEUTRAL can be used to assist during mounting, especially in tight or hard-to-reach areas.
The use of the cross connector reduces the number of required connecting wires and improves the clarity of the circuit. The electrical connection is stable and maintenance-friendly, as no additional connection points are created that could corrode or loosen over time. The application is typical in enclosures, control systems, and other industrial electrical installations where secure potential distribution or signal transmission is required.
Advantages in operation
The use of the WQV 16/2 reduces installation time and decreases the number of required connecting wires. The direct metallic connection between terminals ensures low transition resistance and high reliability. Maintenance is simplified, as no additional connection points exist that would need to be inspected or repaired. Compatibility with standard terminal blocks enables easy integration into existing systems.
Cross connector for pass-through terminal blocks
The WQV 16/2 is a mechanical cross connector inserted into the terminal row to connect adjacent terminals. It is designed for use with terminals supporting a connection cross-section of 16 mm². The "5,1 cm ( 2 inch ) in the type designation WQV 16/2 refers to the number of connected terminals — in this case, two adjacent terminals. The connection is made via direct metallic contact, ensuring low transition resistance. This is particularly important in applications requiring stable potential distribution or signal transmission.
Potential distribution and signal transmission
The connector enables even distribution of an electrical potential across multiple terminals, which is used in control systems for earth or ground connections. It is also suitable for transmitting control signals, e.g. in automation systems, as it establishes a direct electrical connection without additional wiring. Use in pass-through terminal blocks reduces the number of required connecting wires and simplifies installation and maintenance of the system.
Technology explained clearly
The WQV 16/2 consists of a metallic element inserted into the terminal row, connecting the contact surfaces of two adjacent terminals. The design allows it to fit into the designated cutouts of the terminal blocks and is held in place by the mechanical tension of the terminals themselves. It is a passive component without electronic functions; the electrical connection is achieved purely through metallic contact. Use is limited to terminals with a maximum cross-section of 16 mm², as the connector is dimensioned for this cross-section.
Compatibility and accessories
The cross connector is specifically designed for pass-through terminal blocks supporting a connection cross-section of 16 mm². It is compatible with terminal blocks from the Weidmüller product family designed for this cross-section. As suitable accessories, the tool WAW 1 NEUTRAL is offered, which can be used for mounting or dismounting the cross connector. This tool is specifically developed for handling cross connectors in terminal blocks and facilitates installation and removal procedures.
Mounting and installation
Mounting is done by simply inserting the cross connector into the designated cutouts of the terminal blocks. It is placed between two adjacent terminals, where the mechanical tension of the terminals themselves secures the connector. Additional fastening or screw connections are not required. Installation is tool-free, although the tool WAW 1 NEUTRAL can be used to assist during mounting, especially in tight or hard-to-reach areas.
The use of the cross connector reduces the number of required connecting wires and improves the clarity of the circuit. The electrical connection is stable and maintenance-friendly, as no additional connection points are created that could corrode or loosen over time. The application is typical in enclosures, control systems, and other industrial electrical installations where secure potential distribution or signal transmission is required.
Advantages in operation
The use of the WQV 16/2 reduces installation time and decreases the number of required connecting wires. The direct metallic connection between terminals ensures low transition resistance and high reliability. Maintenance is simplified, as no additional connection points exist that would need to be inspected or repaired. Compatibility with standard terminal blocks enables easy integration into existing systems.
| General | |
| Manufacturer | Weidmüller |
| Application | Cross connector for through-type barrier terminals |
| Function | Power distribution, signal transmission |
| Connection cross section | 16 mm² |
| Number of connected terminals | 2 |
| Compatibility | DIN rail terminal blocks |
| Accessories | WAW 1 NEUTRAL |
Questions & answers
What is the delivery time of Weidmüller 1053260000 WQV 16/2 cross connector for terminals P:2 ?
The article Weidmüller 1053260000 WQV 16/2 cross connector for terminals P:2 is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Weidmüller 1053260000 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Weidmüller 1053260000 WQV 16/2 cross connector for terminals P:2 always at the best possible price. We can give you a discount of 2% on Weidmüller 1053260000 WQV 16/2 cross connector for terminals P:2 if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 50 pieces of Weidmüller 1053260000 WQV 16/2 cross connector for terminals P:2 we can offer you a price of 1,15 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
 |
Weidmüller 1028980000 WDU 16/ZA BL passage terminal 16 mm² screw connection
Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Lieske Part No.: 195146 Mfg Part No: 1028980000 Type: WDU 16/ZA BL |
141,55 EUR 141,97 EUR
 ≈ £118.34 | ≈ $157.55
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Weidmüller 1020400000 WDU 16 passage terminal 16 mm² screw connection
The Weidmüller terminal block WDU 16 is a passage terminal block for use in industrial electrical installations. It is designed for connecting or joining electrical conductors with a permanently ... Lieske Part No.: 325498 Mfg Part No: 1020400000 Type: WDU 16 |
2,83 EUR 2,84 EUR
≈ £2.37 | ≈ $3.15
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Weidmüller 1028900000 WDU 16/ZA feed-through terminal 16 mm² screw connection
Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Lieske Part No.: 399544 Mfg Part No: 1028900000 Type: WDU 16/ZA |
141,55 EUR 141,97 EUR
≈ £118.34 | ≈ $157.55
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Weidmüller 1020480000 WDU 16 BL passage terminal 16 mm² screw connection
Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Lieske Part No.: 937423 Mfg Part No: 1020480000 Type: WDU 16 BL |
2,83 EUR 2,84 EUR
≈ £2.37 | ≈ $3.15
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
Weidmüller 2000040000 WDU 16 GE/SW through series terminal block yellow sw
Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Lieske Part No.: 2129762 Mfg Part No: 2000040000 Type: WDU 16 GE/SW |
145,92 EUR 146,32 EUR
≈ £121.99 | ≈ $162.41
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
Fitting accessory for Weidmüller 1053260000 WQV 16/2 cross connector for terminals P:2
 |
Weidmüller 9004500000 WAW 1 NEUTRAL Other tool
Special pliers for notching recesses in plastic strips and housings during electrical and plumbing installation. Lieske Part No.: 303233 Mfg Part No: 9004500000 Type: WAW 1 NEUTRAL |
68,59 EUR 68,84 EUR
≈ £57.34 | ≈ $76.34
Made to order · Delivery time approx. 20 workdaysinfo_outline
|