Installation Material from WAGO

Comb jumper insulated from 1 to 10 rated current 32 A light grey
Sales unit: 25 pieces
Lieske Part No.: 428527

Modular TOPJOB®S connector, stackable for jumper slots, 1-pin, grey
Sales unit: 25 pieces
Lieske Part No.: 186806

End plate, for modular TOPJOB®S connector, 1.5 mm thick, grey
Sales unit: 25 pieces
Lieske Part No.: 1966708

Blind module, can be connected in series, for skipping bridged terminals, for example, grey
Sales unit: 25 pieces
Lieske Part No.: 898731

Modular TOPJOB®S connector, stackable, for jumper slots, 2-pin, 4.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1967250

Modular TOPJOB®S connector, stackable, for jumper slots, 3-pin, 4.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1967209

Modular TOPJOB®S connector, stackable, for jumper slots, 4-pin, 4.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1967149

Modular TOPJOB®S connector, stackable, for jumper slots, 5-pin, 4.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1967138

Fuse plug, with tab, for G-fuse inserts 5 x 20 mm and 5 x 25 mm, without defect indicator, 6.1 mm wide, grey
Sales unit: 50 pieces
Lieske Part No.: 915851

Fuse plug with tab for G-fuse insert 5 x 20 mm with light indicator 12 - 30 V 6.1 mm wide grey
Sales unit: 50 pieces
Lieske Part No.: 915885

Fuse plug, with tab, for G-fuse insert 5 x 20 mm, with light indicator, 30 - 65 V, 6.1 mm wide, grey
Sales unit: 50 pieces
Lieske Part No.: 1960339

Fuse plug with tab for G-fuse insert 5 x 20 mm with light indicator 230 V 6.1 mm wide grey
Sales unit: 50 pieces
Lieske Part No.: 915887

Fuse plug, with tab, for G-fuse insert 5 x 20 mm, with light indicator, 120 V, 6.1 mm wide, grey
Sales unit: 50 pieces
Lieske Part No.: 1947762

Switch lock for securing the cutting carriage, lockable for series 2002 and 2005 orange
Sales unit: 25 pieces
Lieske Part No.: 1236093

Installation level terminal with N-separator slide NT/L/PE grey
Lieske Part No.: 828164

Installation terminal block, with actuation opening, 4 mm², L/L, Push-in CAGE CLAMP®, 4.00 mm², grey
Lieske Part No.: 468973

Installation level terminal, with actuation opening, 4 mm², L/L/PE, Push-in CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 955302

Installation terminal block, with actuation opening, 4 mm², N/L/PE, Push-in CAGE CLAMP®, 4.00 mm², grey
Lieske Part No.: 471156

Installation terminal block, with actuation opening, 4 mm², N/L, Push-in CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 907991

End and intermediate plate 1 mm thick orange
Lieske Part No.: 371184

Warning cover, with black lightning arrow, for 5 terminals, yellow
Sales unit: 25 pieces
Lieske Part No.: 973472

2-wire feed-through terminal suitable for Ex e II applications grey
Lieske Part No.: 373077

2-conductor feed-through terminal, 6 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 6.00 mm², green
Sales unit: 50 pieces
Lieske Part No.: 1954472

2-wire feed-through terminal suitable for Ex e II applications orange
Sales unit: 50 pieces
Lieske Part No.: 938572

2-wire feed-through terminal suitable for Ex e II applications suitable for Ex i applications blue
Lieske Part No.: 553237

2-wire protective conductor terminal suitable for Ex e II applications green-yellow
Lieske Part No.: 763238

2-conductor shield terminal, 6 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 6.00 mm², white
Sales unit: 50 pieces
Lieske Part No.: 1945662

End and intermediate plate 1 mm thick grey
Lieske Part No.: 516773

End and intermediate plate 1 mm thick orange
Lieske Part No.: 332383

Partition wall, 2 mm thick, protruding, grey
Sales unit: 25 pieces
Lieske Part No.: 909352

Partition wall, 2 mm thick, protruding, orange
Sales unit: 25 pieces
Lieske Part No.: 1242189

3-wire feed-through terminal suitable for Ex e II applications grey
Lieske Part No.: 882104

3-conductor feed-through terminal, 6 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 6.00 mm², green
Sales unit: 25 pieces
Lieske Part No.: 1954473

3-wire feed-through terminal suitable for Ex e II applications orange
Sales unit: 25 pieces
Lieske Part No.: 1261487

3-wire feed-through terminal suitable for Ex e II applications suitable for Ex i applications blue
Lieske Part No.: 870276

3-conductor feed-through terminal, 6 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 6.00 mm², black
Sales unit: 25 pieces
Lieske Part No.: 1952571

3-wire protective conductor terminal suitable for Ex e II applications green-yellow
Lieske Part No.: 888195

End and intermediate plate 1 mm thick grey
Sales unit: 25 pieces
Lieske Part No.: 390065

End and intermediate plate 1 mm thick orange
Lieske Part No.: 560355

Partition wall, 2 mm thick, protruding, grey
Sales unit: 25 pieces
Lieske Part No.: 909353

Partition wall, 2 mm thick, protruding, orange
Sales unit: 25 pieces
Lieske Part No.: 944301

2-wire through terminal with testing option, same contour as 2-wire disconnect terminals, grey
Sales unit: 25 pieces
Lieske Part No.: 915892

2-conductor feed-through terminal, 6 mm², with testing option, same contour as 2-conductor disconnect terminal, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 6.00 mm², blue
Sales unit: 25 pieces
Lieske Part No.: 1236092

2-wire fuse terminal with pivoting fuse holder for G-fuse insert 5 x 20 mm without defect indicator grey
Sales unit: 25 pieces
Lieske Part No.: 945409

2-wire fuse terminal with pivoting fuse holder for G-fuse insert 5 x 20 mm 12 - 30 V with defect indication by LED grey
Sales unit: 25 pieces
Lieske Part No.: 148764

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert 5 x 20 mm, with defect indication via LED, 30 - 65 V, for mounting rail 35 x 15 and 35 x 7.5, 6 mm², Push-in CAGE CLAMP®, 6.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1960340

2-wire fuse terminal with pivoting fuse holder for G-fuse insert 5 x 20 mm 230 V with defect indication by LED grey
Sales unit: 25 pieces
Lieske Part No.: 945427

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert 5 x 20 mm, with defect indication via LED, 120 V, for mounting rail 35 x 15 and 35 x 7.5, 6 mm², Push-in CAGE CLAMP®, 6.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1945664

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert 5 x 20 mm, without defect indicator, for mounting rail 35 x 15 and 35 x 7.5, 6 mm², Push-in CAGE CLAMP®, 6.00 mm², black
Sales unit: 25 pieces
Lieske Part No.: 1951598

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert 5 x 30 mm, without defect indicator, for mounting rail 35 x 15 and 35 x 7.5, 6 mm², Push-in CAGE CLAMP®, 6.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1321646