Installation Material from WAGO

PE terminals - 2 wire protection terminals
for DIN 35 rail, green-yellow
Width: 10 mm
Rated cross-section: 8 mm ² Type: 784-607


Quantity: 1 unit.
Lieske Part No.: 117318

2-wire protective conductor terminal suitable for Ex e II applications only use on copper mounting rails green-yellow
Sales unit: 25 pieces
Lieske Part No.: 1964272

N-disconnect terminal blocks
for mounting rail TS 35, Blue, 400 V
Width: 10 mm
Rated current: 57 A
Rated cross-section: 8 mm ² Type: 784-613


Quantity: 1 unit.
Lieske Part No.: 184563

1-conductor equipotential bonding terminal, 10 mm², CAGE CLAMP®, 10.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 142251

2-conductor feed-through terminal, 10 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², light gray
Sales unit: 25 pieces
Lieske Part No.: 1964273

2-conductor feed-through terminal 35 mm² with integrated end plate, side and center labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® gray
Lieske Part No.: 577662

2-conductor feed-through terminal 35 mm² with integrated end plate suitable for Ex i applications side and center labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® blue
Lieske Part No.: 852808

2-conductor protective conductor terminal 35 mm² with integrated end plate, side and center labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® green-yellow
Lieske Part No.: 319658

1-conductor N-disconnect terminal 35 mm² with integrated end plate CAGE CLAMP® blue
Lieske Part No.: 196360

1-conductor equipotential bonding terminal, 35 mm², with integrated end plate, CAGE CLAMP®, 35.00 mm², grey
Sales unit: 15 pieces
Lieske Part No.: 1966762

Relay socket, 1 changeover contact, with manual operation, for elementary relays, 25 mm
Lieske Part No.: 1949693

Bridge, for bridging shaft, 3-way, insulated
Sales unit: 100 pieces
Lieske Part No.: 932111

Bridge, for bridging shaft, 4-way, insulated
Sales unit: 25 pieces
Lieske Part No.: 577180

Bridge, for bridging shaft, 6-way, insulated
Sales unit: 25 pieces
Lieske Part No.: 932137

Bridge, for bridging shaft, 8-way, insulated
Sales unit: 50 pieces
Lieske Part No.: 932138

Bridge, for bridging shaft, from 1 to 3, insulated
Sales unit: 100 pieces
Lieske Part No.: 1566380

Cover transparent, transparent
Lieske Part No.: 106156

Release slide, white
Lieske Part No.: 106157

PCB terminal, 2.5 mm², pitch 5 mm, 3-pin, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 106158

PCB terminal, 2.5 mm², pitch 5 mm, 3-pin, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 106159

PCB terminal, 2.5 mm², pitch 5 mm, 3-pin, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1966180

PCB terminal, 2.5 mm², pitch 5 mm, 2-pole, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1966181

PCB terminal, 2.5 mm², pitch 5 mm, 3-pin, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1966182

PCB terminal, 2.5 mm², pitch 5 mm, 2.50 mm², grey
Lieske Part No.: 106160

PCB terminal, 2.5 mm², pitch 5 mm, 3-pin, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1966183

PCB terminal, 2.5 mm², pitch 5 mm, 1-pole, CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1966184

Insulated support bracket for busbar with screw M4 x 8 mm grey
Sales unit: 25 pieces
Lieske Part No.: 574643

Insulated support bracket, for busbar with self-tapping screw (3.5 x 9) mm, grey
Sales unit: 25 pieces
Lieske Part No.: 605714

Shield clamp 11 mm wide contactable shield diameter
Lieske Part No.: 318092

Support with discharge foot, parallel to the mounting rail, 15 mm long, Cu 10 mm x 3 mm, suitable for shield clamp 790-108, grey
Sales unit: 25 pieces
Lieske Part No.: 1243184

Quantity: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 453183

Support with discharge foot 90° to the mounting rail 45 mm long Cu 10 mm x 3 mm suitable for shield clamp series 790
Sales unit: 25 pieces
Lieske Part No.: 514147

Support with discharge foot parallel to the mounting rail 45 mm long Cu 10 mm x 3 mm suitable for shield clamp bracket series 790 and shield connection terminals series 791
Lieske Part No.: 943377

Support with 2 discharge feet parallel to the support rail 125 mm long Cu 10 mm x 3 mm
Sales unit: 25 pieces
Lieske Part No.: 654894

Shield clamp 19 mm wide contactable shield diameter 7 ... 16 mm
Lieske Part No.: 629382

Shield clamp 27 mm wide contactable shield diameter 6 ... 24 mm
Sales unit: 10 pieces
Lieske Part No.: 928208

Busbar, tinned, 30 mm long, Cu 10 mm x 3 mm
Sales unit: 20 pieces
Lieske Part No.: 506286

Busbar, tinned, 50 mm long, Cu 10 mm x 3 mm
Sales unit: 20 pieces
Lieske Part No.: 198065

Shield clamp contactable shield diameter
Sales unit: 10 pieces
Lieske Part No.: 884874

Spacer sleeve, for mounting rail, suitable for screw with thread M5, specially perforated
Sales unit: 100 pieces
Lieske Part No.: 676895

Support rail, specially perforated, 1000 mm long, tinned, silver-coloured
Lieske Part No.: 804577

Busbar bracket, Cu 10 mm x 3 mm, for 5 I/O, suitable for I/O terminals, series 750
Sales unit: 5 pieces
Lieske Part No.: 975526

Busbar bracket, Cu 10 mm x 3 mm, for 5 I/O, suitable for I/O terminals, series 750
Lieske Part No.: 106161

Busbar bracket, Cu 10 mm x 3 mm, for 8 I/O, suitable for I/O terminals, series 750, silver
Lieske Part No.: 1235983

Shield clamp 11 mm wide contactable shield diameter up to 8 mm
Sales unit: 50 pieces
Lieske Part No.: 621708

Shield clamps 6 - 16 mm diameter 21.8 mm wide
Sales unit: 25 pieces
Lieske Part No.: 414179

Shield clamp, 30 mm wide, 6 ... 20 mm
Sales unit: 25 pieces
Lieske Part No.: 1131708

Busbar holder, for busbars Cu 10 mm x 3 mm, one-sided, straight, can be snapped onto TS 35, grey
Sales unit: 10 pieces
Lieske Part No.: 191948

Busbar holder, for busbars Cu 10 mm x 3 mm, one-sided, angled, can be snapped onto TS 35, grey
Lieske Part No.: 152076

Busbar holder for busbars Cu 10 mm x 3 mm one-sided, straight snap-on to TS 35
Sales unit: 10 pieces
Lieske Part No.: 1945449