Installation Material from WAGO

2-conductor feed-through terminal, 2.5 mm², with testing option, with additional bridging, same contour as 2-conductor disconnect terminal, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1960318

2-wire protective conductor terminal with testing option with additional bridging, same contour as 2-wire isolating terminal green-yellow
Sales unit: 50 pieces
Lieske Part No.: 949787

End cap, signal distributor, grey
Sales unit: 25 pieces
Lieske Part No.: 949790

2-wire fuse terminal with pivoting fuse holder for G-fuse insert 5 x 20 mm without defect indicator with additional bridging grey
Sales unit: 50 pieces
Lieske Part No.: 494116

2-wire fuse terminal with pivoting fuse holder for G-fuse insert 5 x 20 mm 12 - 30 V with defect indication by LED with additional bridging gray
Sales unit: 50 pieces
Lieske Part No.: 949792

2-wire fuse terminal with pivoting fuse holder for G-fuse insert 5 x 20 mm 30 - 65 V with defect indication by LED with additional bridging grey
Sales unit: 50 pieces
Lieske Part No.: 1960319

2-wire fuse terminal with pivoting fuse holder for G-fuse insert 5 x 20 mm 230 V with defect indication by LED with additional bridging grey
Sales unit: 50 pieces
Lieske Part No.: 1960320

2-conductor fuse terminal, with pivoting fuse holder, with additional bridging, for G-fuse insert 5 x 20 mm, with defect indication via LED, 120 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1961201

Cap, signal distributor, orange
Sales unit: 25 pieces
Lieske Part No.: 949795

End cap, signal distributor, blue
Sales unit: 25 pieces
Lieske Part No.: 1960321

2-conductor base terminal, with additional cross-bridging, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 945340

2-wire isolating and measuring terminal with test option isolating blade holder orange with additional bridging grey
Sales unit: 50 pieces
Lieske Part No.: 945341

2-wire isolating and measuring terminal with mechanical locking with test option isolating blade holder orange with additional bridging grey
Sales unit: 50 pieces
Lieske Part No.: 1960322

2-wire isolating and measuring terminal with mechanical locking with test option isolating blade holder orange with additional bridging orange
Sales unit: 50 pieces
Lieske Part No.: 1960324

2-wire isolating and measuring terminal with mechanical locking with test option isolating blade holder orange with additional bridging blue
Sales unit: 50 pieces
Lieske Part No.: 1237679

2-wire fuse terminal for vehicle fuses with test option without defect indication with additional bridging grey
Sales unit: 50 pieces
Lieske Part No.: 945346

2-conductor fuse terminal, for automotive mini flat fuses, with test option, with defect indication via LED, 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 945357

2-conductor fuse terminal, for automotive mini flat fuses, with test option, with defect indication via LED, 48 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1960326

2-conductor fuse terminal, for automotive mini blade fuses, with test option, with defect indication via LED, 12 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 945358

2-conductor fuse terminal, for automotive mini flat fuses, with test option, with defect indication via LED, 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1960888

2-conductor fuse terminal, for automotive mini flat fuses, with test option, with defect indication via LED, 48 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1960327

2-wire fuse terminal for vehicle fuses with test option 12 V with defect indication by LED Current consumption LED: 4.8 mA grey
Sales unit: 50 pieces
Lieske Part No.: 1237700

End and intermediate plate, 1 mm thick, grey
Sales unit: 25 pieces
Lieske Part No.: 945359

End and intermediate plate, 1 mm thick, orange
Sales unit: 25 pieces
Lieske Part No.: 945365

Double-deck terminal feed-through/feed-through terminal L/L without label holder for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² Push-in CAGE CLAMP® grey
Lieske Part No.: 330744

Double-deck terminal, with grey partition, L, protruding, contact inserts only on the upper level, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1949220

Double-deck terminal, orange partition, L, protruding, contact inserts only on the upper level, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1949221

Double-deck terminal block Feed-through/feed-through terminal block L/L with end plate without label holder Housing colour grey grey
Sales unit: 50 pieces
Lieske Part No.: 1961671

Double-deck terminal Feed-through/feed-through terminal N/L without label carrier Housing colour grey Suitable for applications Ex e II grey
Sales unit: 50 pieces
Lieske Part No.: 654457

Double-deck terminal, feed-through/feed-through terminal, with end plate, N/L, without label holder, conductor entry EG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945672

Double-deck terminal feed-through/feed-through terminal L/N without label holder for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² Push-in CAGE CLAMP® grey
Sales unit: 50 pieces
Lieske Part No.: 265140

Double-deck terminal, feed-through/feed-through terminal, with end plate, L/N, without label holder, conductor entry OG, printed in blue, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945669

Double-deck terminal feed-through/feed-through terminal N/N without label holder for applications Ex e II and Ex i suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² Push-in CAGE CLAMP® blue
Sales unit: 50 pieces
Lieske Part No.: 230796

Double-deck terminal Feed-through/feed-through terminal N/N with end plate without label holder Housing colour blue Suitable for applications Ex i blue
Sales unit: 50 pieces
Lieske Part No.: 1945668

Double-deck terminal, feed-through/feed-through terminal, N/L, without label holder, suitable for Ex e II applications, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 1954471

Double-deck terminal 4-conductor protective conductor terminal PE without label carrier Housing colour green-yellow internally bridged for applications Ex e II suitable green-yellow
Lieske Part No.: 541907

Double-deck terminal 4-conductor protective conductor terminal PE with end plate without label carrier Housing colour green-yellow internally bridged green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1945687

Double-deck terminal block 4-conductor feed-through terminal block L without label carrier Housing color gray internally bridged Conductor entry violet printed Suitable for applications Ex e II gray
Sales unit: 50 pieces
Lieske Part No.: 155408

Double-deck terminal, 4-conductor feed-through terminal, with end plate, L, without label carrier, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1945681

Double-deck terminal, 4-conductor feed-through terminal, N, without label carrier, suitable for Ex e II and Ex i applications, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 111585

Double-deck terminal, 4-conductor feed-through terminal, with end plate, N, without label carrier, suitable for Ex i applications, internally bridged, conductor entry printed in violet, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1586267

Double-deck diode terminal with diode 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 1967401

Double-deck diode terminal with diode 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 1967402

Component terminal, double-deck, with 2 diodes 1N4007, anodes below, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1967403

Component terminal, double-deck, with 2 diodes 1N4007, anodes at the top, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1243110

Double-deck diode terminal with 2 diodes 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 908646

Double-deck diode terminal with 2 diodes 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 1967404

Component terminal, double-deck, with 2 diodes 1N4007, anode top, anode right, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 828237

Double-deck diode terminal with 2 diodes 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 908647

Double-deck terminal protective conductor/through terminal PE/N without label carrier for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² Push-in CAGE CLAMP® grey
Sales unit: 50 pieces
Lieske Part No.: 578124