Installation Material from WAGO

4-conductor feed-through terminal 2.5 mm² side and center labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1958594

4-conductor protective conductor terminal 2.5 mm² side label holders for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® green-yellow
Sales unit: 100 pieces
Lieske Part No.: 649425

Terminal blocks with CAGE CLAMP COMPACT - Connection
With only 5 mm Clamping width and otherwise compact dimensions, the WAGO terminal blocks of series 870 are real space savers and with a nominal cross section 4 mm ²! For more space between the cable channels that facilitates and speeds up the wiring, or it könmnen small terminal boxes are used, which saves space and money.
2-wire - through terminals
Wire size: 0.08-2.5 mm ² / 4 'f'
Color: gray
Width: 5 mm

Type: 870-901
Quantity: 1 unit.
Lieske Part No.: 692761

2-conductor feed-through terminal 2.5 mm² side and center labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 298988

2-conductor feed-through terminal 2.5 mm² side and center labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1958595

Terminal blocks with CAGE CLAMP COMPACT - Connection With only 5 mm Clamping width and otherwise compact dimensions are the WAGO terminal blocks of series 87 and the real space saver at a nominal cross section 4 mm ²! For more space between the cable channels that facilitates and speeds up the wiring, or it könmnen small terminal boxes are used, which saves space and money. 2-wire - through terminal wire size: 8-2,5 mm ² / 4 'f' color: blue width: 5 mm Type: 87 -9 4 item:
ST.
Lieske Part No.: 785770

2-conductor feed-through terminal 2.5 mm² side and center labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1958596

Terminal blocks with CAGE CLAMP COMPACT - Connection
With only 5 mm Clamping width and otherwise compact dimensions, the WAGO terminal blocks of series 870 are real space savers and with a nominal cross section 4 mm ²! For more space between the cable channels that facilitates and speeds up the wiring, or it könmnen small terminal boxes are used, which saves space and money.
2-wire - earth terminals
Conductor cross section: 0.08-2.5 mm ² / 4 'f'
Color: yellow-green
Width: 5 mm

Type: 870-907
Quantity: 1 unit.
Lieske Part No.: 305510

2-conductor protective conductor terminal 2.5 mm² suitable for Ex e II applications, side label holders for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 554913

2-conductor feed-through terminal 2.5 mm² suitable for Ex e II applications, side and center labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 346357

2-conductor feed-through terminal 2.5 mm² side and center labeling for mounting rail 15 CAGE CLAMP®
Lieske Part No.: 962608

2-conductor feed-through terminal 2.5 mm² side and center labeling for mounting rail 15 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 918107

2-conductor feed-through terminal 2.5 mm² suitable for Ex i applications, side and center labeling for DIN rail 15 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 172087

2-conductor protective conductor terminal 2.5 mm² side label holders for mounting rail 15 CAGE CLAMP®
Lieske Part No.: 589124

2-conductor feed-through terminal 2.5 mm² suitable for Ex e II applications, side and center labeling for DIN rail 15 CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 730344

Terminal blocks with CAGE CLAMP COMPACT - Connection
With only 5 mm Clamping width and otherwise compact dimensions, the WAGO terminal blocks of series 870 are real space savers and with a nominal cross section 4 mm ²! For more space between the cable channels that facilitates and speeds up the wiring, or it könmnen small terminal boxes are used, which saves space and money.
End plate
Color: gray
Width: 2 mm
Finish: for 2-conductor terminal type: 870-923


Quantity: 1 unit.
Lieske Part No.: 287487

End and intermediate plate 2 mm thick orange
Lieske Part No.: 166917

End and intermediate plate 2 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1960691

End and intermediate plate 2 mm thick only for 2-wire protective conductor Ex terminals
Sales unit: 25 pieces
Lieske Part No.: 1960693

Partition wall 2 mm thick protruding
Sales unit: 25 pieces
Lieske Part No.: 528141

Partition wall 2 mm thick protruding
Sales unit: 25 pieces
Lieske Part No.: 436055

Terminal blocks with CAGE CLAMP COMPACT - Connection
With only 5 mm Clamping width and otherwise compact dimensions, the WAGO terminal blocks of series 870 are real space savers and with a nominal cross section 4 mm ²! For more space between the cable channels that facilitates and speeds up the wiring, or it könmnen small terminal boxes are used, which saves space and money.
End plate
Color: gray
Width: 1 mm
Version: for 3-conductor terminal

Type: 870-933
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 470851

End and intermediate plate 1 mm thick orange
Sales unit: 25 pieces
Lieske Part No.: 374709

End and intermediate plate 1 mm thick grey
Sales unit: 25 pieces
Lieske Part No.: 594850

Terminal blocks with CAGE CLAMP COMPACT - Connection
With only 5 mm Clamping width and otherwise compact dimensions, the WAGO terminal blocks of series 870 are real space savers and with a nominal cross section 4 mm ²! For more space between the cable channels that facilitates and speeds up the wiring, or it könmnen small terminal boxes are used, which saves space and money.
End plate
Color: orange
Width: 1 mm
Version: for 4-conductor terminal

Type: 870-944
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 405854

Partition wall 1 mm thick
Sales unit: 25 pieces
Lieske Part No.: 260185

Partition wall 1 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964350

Partition wall 1 mm thick
Sales unit: 25 pieces
Lieske Part No.: 631586

Partition wall 1 mm thick
Sales unit: 25 pieces
Lieske Part No.: 895304

Three-level terminal through/through/through terminal L/L/L for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 875079

Three-level terminal protective conductor/through-/through-terminal PE/L/L for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 1966737

Double-deck terminal feed-through/feed-through terminal L/L for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 333264

Double-deck terminal protective conductor/through terminal PE/L for applications Ex e II suitable for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 993662

Type: 870-567
Sales unit: 50 pc
Sales unit: 50 pieces
Lieske Part No.: 481418

End and intermediate plate, 2.5 mm thick, grey
Sales unit: 25 pieces
Lieske Part No.: 938142

Partition wall, 2 mm thick, protruding, grey
Sales unit: 25 pieces
Lieske Part No.: 1964351

End and intermediate plate, 2.5 mm thick, grey
Sales unit: 25 pieces
Lieske Part No.: 834404

Partition wall, 2 mm thick, protruding, grey
Sales unit: 25 pieces
Lieske Part No.: 672089

End and intermediate plate 2.5 mm thick orange
Sales unit: 25 pieces
Lieske Part No.: 255216

Partition wall, 2 mm thick, protruding, orange
Sales unit: 25 pieces
Lieske Part No.: 1964352

End and intermediate plate 2.5 mm thick orange
Sales unit: 25 pieces
Lieske Part No.: 767935

Partition wall, 2 mm thick, protruding, orange
Sales unit: 25 pieces
Lieske Part No.: 1964353

End and intermediate plate, 2.5 mm thick, grey
Sales unit: 25 pieces
Lieske Part No.: 181903

Partition wall, 2 mm thick, protruding, grey
Sales unit: 25 pieces
Lieske Part No.: 550024

End and intermediate plate 2.5 mm thick orange
Sales unit: 25 pieces
Lieske Part No.: 135910

Partition wall, 2 mm thick, protruding, orange
Sales unit: 25 pieces
Lieske Part No.: 1964354

3-conductor through terminal without shield conductor rail with test opening for test plug Ø 2 mm and Ø 2.3 mm max. insulation diameter 4.4 mm grey
Sales unit: 100 pieces
Lieske Part No.: 989885

3-conductor feed-through terminal, 4 mm², with test opening, without shield conductor rail, central labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 906393

3-conductor through terminal without shield conductor rail with test opening for test plug Ø 2 mm and Ø 2.3 mm max. insulation diameter 4.4 mm orange
Sales unit: 100 pieces
Lieske Part No.: 801844

3-conductor feed-through terminal, 4 mm², with test opening, without shield conductor rail, central labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², orange
Sales unit: 100 pieces
Lieske Part No.: 1964379