Installation Material from WAGO

2-conductor terminal without push button without locking foot 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964184

2-conductor middle terminal without push button 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 399271

2-conductor terminal without push button 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964185

Middle clamp without locking foot for sheet thickness 0.6 - 1.2 mm mounting hole Ø 3.5 + 0.1 mm max. insulation diameter 4.4 mm light grey
Sales unit: 100 pieces
Lieske Part No.: 606746

2-conductor end terminal without push button with locking foot for sheet thickness 0.6 - 1.2 mm mounting hole Ø 3.5 mm 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964186

2-conductor end terminal for applications Ex i suitable without push button with locking foot for sheet thickness 0.6 - 1.2 mm mounting hole Ø 3.5 mm 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964187

2-conductor end terminal without push button 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964188

2-conductor end terminal without push button with locking foot for sheet thickness 0.6 - 1.2 mm mounting hole Ø 3.5 mm 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964189

2-conductor end terminal without push button without locking foot 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964319

2-conductor end terminal for applications Ex i suitable without push button without locking foot 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964320

2-conductor end terminal without push button 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964321

2-conductor end terminal without push button without locking foot 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964322

End terminal with mounting flange M4 for screw and similar fastening types Mounting hole Ø 4.2 mm max. Insulation diameter 4.4 mm grey
Sales unit: 100 pieces
Lieske Part No.: 605166

2-conductor end terminal for Ex i applications without push button with M4 mounting flange for screw and similar mounting types Mounting hole Ø 4.2 mm 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964323

2-conductor end terminal without push button with mounting flange for screw and similar mounting types Mounting hole Ø 3.2 mm 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964324

2-conductor end terminal without push button with M4 mounting flange for screw and similar mounting types Mounting hole Ø 4.2 mm 2.5 mm² CAGE CLAMP®
Sales unit: 100 pieces
Lieske Part No.: 1964325

End plate for terminals with locking foot 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964326

End plate for terminals with locking foot 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964327

End plate for terminals with locking foot 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964328

End plate for terminals with locking foot 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964329

End plate with mounting flange M3 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 127044

End plate with mounting flange M3 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964330

End plate with mounting flange M3 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964331

End plate with mounting flange M3 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 231681

End plate with mounting flange M4 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 973908

End plate with mounting flange M4 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964332

End plate with mounting flange M4 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964333

End plate with mounting flange M4 2.5 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1964334

Conductor cross section solid (solid): 0.08 - 2.5 mm2
Rated current: 16 A
Rated voltage: 500 V
Type of electrical connection 1: spring-loaded terminals
Type of electrical connection 2 Spring clamp connection
Connection direction: up
Number of floors: 2
No. of clamping points per level: 2
Mounting type: DIN rail 35/15 mm
Insulation: Thermoplastic
Operating temperature range: 105 - 105 ° C
Material insulation according to UL 94 V0
Width / Pitch: 5 mm
Height at lowest possible mounting height: 40 mm
Length: 70 mm
Explosion-tested version "Ex e ': no
Closing plate required: yes
Color: gray
Levels cross: no

Type: 870-101
Quantity: 1 unit.
Lieske Part No.: 134762

1-conductor/1-pin double-deck base terminal Feed-through/feed-through terminal N/L for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 1963915

1-conductor/1-pin double-deck base terminal Feed-through/feed-through terminal L/N for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 920891

1-wire/1-pin double-deck base terminal Feed-through/feed-through terminal N/N Housing colour blue Suitable for Ex i applications blue
Sales unit: 50 pieces
Lieske Part No.: 258932

2-wire/2-pin double-deck base terminal 2-wire/2-pin protective conductor terminal PE Housing colour green-yellow internally bridged green-yellow
Lieske Part No.: 979361

2-wire/2-pin double-deck base terminal 2-wire/2-pin feed-through terminal L Housing colour grey internally bridged Female connector entry violet printed grey
Sales unit: 50 pieces
Lieske Part No.: 351360

2-wire/2-pin double-deck base terminal 2-wire/2-pin feed-through terminal N Housing colour blue internally bridged Female connector entry violet printed blue
Sales unit: 50 pieces
Lieske Part No.: 228461

2-conductor/1-pin double-deck base terminal 2-conductor/1-pin through terminal L/L for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 1426215

Double-deck terminal 4-conductor protective conductor terminal PE internally bridged for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 1948520

4-conductor/2-pin double-deck base terminal 4-conductor/2-pin through terminal L/L internally bridged conductor entry printed in violet for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 1951071

End and intermediate plate 1 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1948537

End and intermediate plate 1 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1426242

1-conductor/1-pin double-deck base terminal Protective conductor/through terminal PE/N for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 1963916

End and intermediate plate 1 mm thick grey
Sales unit: 25 pieces
Lieske Part No.: 518933

End and intermediate plate 1 mm thick orange
Sales unit: 25 pieces
Lieske Part No.: 819968

1-conductor/1-pin double-deck base terminal Protective conductor/through terminal PE/L for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 966528

2-conductor/2-pin double-deck base terminal Feed-through/feed-through terminal L/L for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 40 pieces
Lieske Part No.: 1956988

4-conductor/4-pin double-deck base terminal 4-conductor/4-pin protective conductor terminal PE internally bridged for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 40 pieces
Lieske Part No.: 1961435

4-conductor/4-pin double-deck base terminal 4-conductor/4-pin through terminal L internally bridged conductor entry printed in violet for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 40 pieces
Lieske Part No.: 942897

End and intermediate plate 1 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1956989

End and intermediate plate 1 mm thick
Sales unit: 25 pieces
Lieske Part No.: 1956990

2-conductor/2-pin double-deck base terminal Feed-through/feed-through terminal L/L for mounting rail 35 x 15 and 35 x 7.5 2.5 mm² CAGE CLAMP®
Sales unit: 50 pieces
Lieske Part No.: 1968399