Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816

Your rating:
Average rating
product review for VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816
( 4.6 / 5 ) 68 ratings
VOKA A-2Y(L)2Y 2 X 2 X 0,8
This image may differ from the desired article.
1,56 EUR
incl. 0,23 EUR copper surcharge
( 1,86 EUR incl. VAT )
≈ £1.30  |  ≈ $1.71
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
In Stock: >1000 meters
1x VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816
Lieske Part No.:162914
Mfg Part No:
Weight:0.12 kg
Type:A-2Y(L)2Y 2 X 2 X 0,8
Graduated prices net
From piecesPrice per meters
501,48 EUR
1001,40 EUR
2501,32 EUR
5001,24 EUR

Product information for VOKA A-2Y(L)2Y 2 X 2 X 0,8:

The VOKA telecommunication underground cable type A-2Y(L)2Y 2 X 2 X 0,8 is a specialised cable for underground installation in the field of telephony and data transmission. It is primarily used in outdoor installations, especially as local access or local connection cables, in railway station telecommunication systems, and in industrial facilities. The cable is designed for low-frequency transmission purposes and is typically operated unspooled in the trunk network. It complies with DIN VDE 0816 Part 1 standards and is approved for use in operational sites, with special restrictions applying to mine workers according to DIN VDE 0118. Cables with an outer PE sheath are not permitted in fire- or explosion-hazardous areas without additional protective measures. Use for high-voltage installation purposes is expressly excluded.

Applications
This cable is designed for underground installation and is suitable for use in outdoor environments where a robust and long-lasting connection is required. It is frequently used in telecommunications, for example, for connecting local networks or as part of railway station telecommunication cables. The construction with polyethylene (PE) as insulation and sheathing material ensures high mechanical and chemical resistance. Installation must consider the specified temperature ranges: laying between -20 °C and +50 °C, and operation after laying between -30 °C and +70 °C.

Functions and Equipment in Detail
The cable consists of single-strand, bare copper conductors with a diameter of 0.8 mm. The conductors are insulated with PE (2Y) and marked with black rings to enable easy identification. The stranding is done in a star quad system: four conductors form a star quad, five star quads form a basic bundle, and five or ten basic bundles form a main bundle. These bundles are stranded into a cable core, which is additionally wrapped with a core wrapping. The outer sheath consists of a layered sheath made of a 0.2 mm thick aluminium tape coated on both sides with plastic, and fused with a black PE sheath. The sheath marking is continuous with the inscription “Fernsprech-Handapparat” and white metre markings, facilitating precise length determination and positioning.

Technology Explained Simply
The technical properties of the cable are tailored to the requirements of telecommunication and data transmission. The rated voltage is 225 V, and the test voltage is 2000 V, ensuring high electrical strength. The loop resistance is 73.2 Ohm/km, ensuring efficient signal transmission. The current-carrying capacity is 5.1 A, sufficient for typical loads in telecommunication systems. The operating capacitance is 55 nF/km, and the insulation resistance is 5 GOhm x km, indicating high insulation quality and low leakage currents. The capacitive couplings (K3) are 300 pF/400 pF at 800 Hz and a length of 300 m, affecting signal quality. The line attenuation is approximately 0.78 dB/km at 800 Hz, indicating low signal attenuation over length. The bending radius is 7.5 times the cable diameter, enabling flexible installation.

Compatibility and Accessories
The cable is designed for use in telecommunication systems and can be combined with other cables of the same type or compatible systems. It is designed for underground installation and does not require additional protective measures when installed in non-hazardous areas. Installation must comply with VDE standards, particularly DIN VDE 0816 Part 1.

Installation and Mounting
Installation is carried out by underground laying, observing the specified temperature ranges and bending radius (7.5 times the cable diameter). The cable is laid in an appropriate trench, with the cable core protected mechanically by stranding and the layered sheath. The sheath marking facilitates length measurement and positioning. After installation, the cable must be operated in the intended environment, ensuring that temperature limits of -30 °C to +70 °C are not exceeded.

Operational Advantages
The cable offers high mechanical stability and electrical reliability. The PE insulation and layered sheath provide high resistance to environmental influences. The low line attenuation and high insulation resistance ensure stable signal transmission. Clear marking of conductors and sheath simplifies installation and maintenance. Use in telecommunication systems enables reliable and long-term operation without additional protective measures in non-hazardous areas.

General
Conductor diameter0,8 mm
Wire insulationPE -
Nominal voltage225 V
Test voltage2000 V
Loop resistance73,2 Ohm/km
Current carrying capacity5,1 A
Operating capacity55 nF/km
Insulation resistance5 GOhm x km
Capacitive couplings K3300 pF/400 pF at 800 Hz, 300 m
Line attenuation0,78 dB/km
Installation temperature range-20 °C to +50 °C -
Temperature range after installation-30 °C to +70 °C -
Bending radius7.5 x cable diameter -
Material outer sheathaluminium tape with plastic coating and PE sheath -
Conductor markingblack rings -
Sheath markingTelephone handset, white meter marking -


Please note...
For this article, we charge 14,85 EUR for measuring, cutting and re-furling the cable. If you take a whole 100m or 500m cable reel, the charge will of course be dropped.

The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.

Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
This article contains a copper surcharge of 0,23 EUR. This depends on daily copper prices and weight of included copper. You can inquire the copper price via phone under +49 7666 884990

Questions & answers

What is the delivery time of VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816?

The article VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 is currently in stock

According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of VOKA A-2Y(L)2Y 2 X 2 X 0,8 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 always at the best possible price. We can give you a discount of 2% on VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 50 meters of VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 we can offer you a price of 1,48 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x VOKA A-2Y(L)2Y 2x2x0,8 Telephone Cable Underground
VOKA A-2Y(L)2Y 2x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816
1,56 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: VOKA A-2Y(L)2Y 2x2x0,8 Telephone Cable Underground
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
5 + 4 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.