VDE-Kabel G326096 NHXH-J E30 3x2.5 mm² orange halogen-free sheathed cable
|
2,33 EUR |
|
|
incl. 0,95 EUR copper surcharge ( 2,77 EUR incl. VAT ) ≈ £1.95 | ≈ $2.57 plus delivery charges: 55,00 € |
|
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |
| In Stock: >1000 meters | |
| Lieske Part No.: | 378364 |
|---|---|
| Mfg Part No: | G326096 |
| Weight: | 0.18 kg |
| Type: | NHXH 3X2,5 E30 |
Product information for VDE-Kabel G326096:
Applications
This cable is used in areas where special protection against fire and fire damage is required to safeguard people and property. It is intended for installations that must continue to function even in the event of fire, such as fire alarm systems, safety lighting, and emergency power supplies. Testing for functional integrity according to DIN 4102 Part 12 (E30) has been successfully completed for all standard cable support systems (cable trays, ladders, ceiling installations). This makes the cable suitable for critical safety installations that must continue to operate at high temperatures during a fire.
Functions and Equipment in Detail
The cable features a cross-linked, halogen-free, ceramizing two-layer insulation (HXI2), providing high heat resistance and fire retardancy. Conductor identification follows VDE 0293-308. The common conductor sheathing protects individual conductors and ensures structural stability. The outer sheath is orange and made from a halogen-free polymer blend, contributing to fire retardancy and reduced smoke development. The cable is halogen-free, fire-retardant, exhibits minimal smoke development, and releases no corrosive gases in the event of fire.
Technical Explanation
The rated voltage is 300/500 V, sufficient for indoor power installations. The test voltage of 2000 V ensures high electrical strength. The temperature range during installation is between +5 °C and +70 °C, and after installation between -30 °C and +70 °C. The bending radius is 15 times the cable diameter for single-core and 12 times for multi-core conductors. Tests include flame retardancy according to EN 50266-2-4 and IEC 60332-3 Cat.C, insulation integrity FE 180 according to VDE 0472 T. 814, and functional integrity E 30 according to DIN 4102-12. During design, note that conductor resistance at 800 °C (final temperature during E30 test) is approximately four times higher than at 20 °C.
Compatibility and Accessories
The cable is intended for use in standard cable support systems such as cable trays, ladders, and ceiling installations. It is suitable for connecting devices of protection class II. Installation in conduit is permitted, provided no water accumulation can occur. It is not intended for direct installation in soil or water.
Installation and Mounting
Installation is carried out indoors, with cables requiring protection against mechanical damage and external influences. Installation in air, concrete, or conduit is permitted, with sufficient water drainage required for conduit installations. Bending radii depend on conductor structure (single- or multi-strand) and must be observed to maintain cable mechanical integrity.
Operational Advantages
The cable provides high safety in fire situations through the functional integrity test E30, ensuring that conductors continue to carry current even at high temperatures. The halogen-free composition minimizes the formation of toxic gases and smoke, facilitating evacuation. The ceramizing insulation increases heat resistance and prevents flame spread. Use in safety installations ensures reliability even under critical conditions.
| General | |
| Nominal voltage | 300/500 V |
| Test voltage | 2000 V |
| Installation temperature range | +5 to +70 °C |
| Temperature range after installation | -30 to +70 °C |
| Bend radius single-core | 15 x cable diameter |
| Bending radius multi-core | 12 x cable diameter |
| Flame retardancy | EN 50266-2-4, IEC 60332-3 Cat.C |
| Insulation integrity | FE 180 according to VDE 0472 Part 814 |
| Circuit integrity | E 30 according to DIN 4102-12 |
| Degree of protection | halogen-free, flame-retardant, minimal smoke emission, no corrosive gases |
| Conductor marking | according to VDE 0293-308 |
| Insulation | Networked, halogen-free, ceramizing 2-layer insulation HXI2 |
| Sheath colour | Orange |
| Conductor | Copper conductor, bare, solid or stranded |
| Common core sheathing | |
The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.
Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
Questions & answers
What is the delivery time of VDE-Kabel G326096 NHXH-J E30 3x2.5 mm² orange halogen-free sheathed cable?
The article VDE-Kabel G326096 NHXH-J E30 3x2.5 mm² orange halogen-free sheathed cable is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of VDE-Kabel G326096 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you VDE-Kabel G326096 NHXH-J E30 3x2.5 mm² orange halogen-free sheathed cable always at the best possible price. We can give you a discount of 2% on VDE-Kabel G326096 NHXH-J E30 3x2.5 mm² orange halogen-free sheathed cable if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

