VDE-Kabel 1007780 A-2Y(L)2Y 2x2x0.6 mm² St.III Bd. telephone cable for underground installation VDE0816
|
1,05 EUR |
|||||||||||
|
incl. 0,12 EUR copper surcharge ( 1,25 EUR incl. VAT ) ≈ £0.88 | ≈ $1.16 plus delivery charges: 55,00 € |
|||||||||||
| in stockinfo_outline | |||||||||||
| In Stock: >1000 meters | |||||||||||
| Lieske Part No.: | 633032 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 1007780 | ||||||||||
| UPC/EAN: | 8717511223898 | ||||||||||
| Weight: | 0.063 kg | ||||||||||
| Type: | A-2Y(L)2Y 2X2X0,6 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for VDE-Kabel 1007780:
Applications
This cable is designed for underground installation and is primarily used in the low-frequency range, especially in the trunk network and preferably operated without spooling. It is suitable for connecting telecommunication systems, particularly in fixed infrastructures such as railway stations, industrial facilities, or for supplying local networks. Installation is carried out underground, with the cables exhibiting high mechanical stability and resistance to external influences.
Functions and Equipment in Detail
The cable consists of single-strand, bare copper conductors with a diameter of 0.6 mm. The conductors are insulated with polyethylene (PE), designated as 2Y. Conductor identification is achieved through black rings applied to the insulation. The stranding is performed in a star quad system: four conductors form a star quad, five star quads form a basic bundle, and five or ten basic bundles form a main bundle. These bundles are stranded to form the cable core. The core is wrapped with a layer sheath made of a 0.2 mm thick aluminium tape, coated on both sides with plastic, and welded to the outer PE sheath (black). The sheath marking is continuous, featuring the inscription “Fernsprech-Handapparat” and a white meter marking.
Technology Explained Simply
The rated voltage is 225 V, with a test voltage of 2000 V, highlighting the cable’s electrical strength. The loop resistance is 130 Ohm/km, typical for a conductor size of 0.6 mm. The current-carrying capacity is 2.5 A, indicating the maximum current draw during operation. The operating capacitance is 52 nF/km, and the insulation resistance is 5 GOhm x km, indicating high insulation quality. The capacitive couplings (K3) are 300 pF/400 pF at 800 Hz and a length of 300 m. The line attenuation is approximately 1.04 dB/km at 800 Hz, describing signal losses over the cable length. The temperature ranges are specified as -20 °C to +50 °C during installation and -30 °C to +70 °C after installation. The bending radius is 7.5 times the cable diameter, defining the flexibility during installation.
Compatibility and Accessories
The cable is designed for use in telecommunication systems and is typically used in conjunction with other telecommunication cables and connection or termination components. It is not intended for high-voltage applications. Installation is generally carried out underground, with cables laid in shafts, ducts, or directly in the ground. Compatibility with other cables of the same construction according to DIN VDE 0816 Part 1 is ensured.
Installation and Mounting
Installation requires adherence to the specified temperature ranges: -20 °C to +50 °C during laying and -30 °C to +70 °C after laying. The bending radius of 7.5 times the cable diameter must be maintained to avoid mechanical damage. Installation is carried out underground, with cables typically laid in shafts, ducts, or directly in the ground. The cables are designed for outdoor use and exhibit high mechanical stability.
Operational Advantages
The cable offers high electrical insulation quality, low line attenuation, and high mechanical stability. The PE insulation and PE sheath provide good resistance to external influences. The continuous meter marking and conductor identification facilitate installation and maintenance. Use in telecommunication systems enables reliable signal transmission in the low-frequency range.
| General | |
| Conductor diameter | 0,6 mm |
| Wire insulation | PE |
| Nominal voltage | 225 V |
| Test voltage | 2000 V |
| Loop resistance | 130 Ohm/km |
| Current carrying capacity | 2,5 A |
| Operating capacity | 52 nF/km |
| Insulation resistance | 5 GOhm x km |
| Capacitive couplings K3 | 300 pF/400 pF |
| Line attenuation | 1,04 dB/km |
| Installation temperature range | -20 °C to +50 °C |
| Temperature range after installation | -30 °C to +70 °C |
| Bending radius | 7.5 x cable diameter |
| Sheath marking | Telephone handset, white marking |
| Conductor marking | black rings |
| Stranding | Star quad, basic bundle, main bundle |
| Sheath | Shielding layer made of aluminium tape with plastic coating, welded to PE sheath |
The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.
Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
Questions & answers
What is the delivery time of VDE-Kabel 1007780 A-2Y(L)2Y 2x2x0.6 mm² St.III Bd. telephone cable for underground installation VDE0816?
The article VDE-Kabel 1007780 A-2Y(L)2Y 2x2x0.6 mm² St.III Bd. telephone cable for underground installation VDE0816 is currently in stock
According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of VDE-Kabel 1007780 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you VDE-Kabel 1007780 A-2Y(L)2Y 2x2x0.6 mm² St.III Bd. telephone cable for underground installation VDE0816 always at the best possible price. We can give you a discount of 2% on VDE-Kabel 1007780 A-2Y(L)2Y 2x2x0.6 mm² St.III Bd. telephone cable for underground installation VDE0816 if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 50 meters of VDE-Kabel 1007780 A-2Y(L)2Y 2x2x0.6 mm² St.III Bd. telephone cable for underground installation VDE0816 we can offer you a price of 0,99 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

