Trilux Jovie 50I-AM2L-LR/4200-730 4G1 ET shoulder/top light, 42W 9002209298

Versatile outdoor mast light with a reduced, international design language and flat construction. With an intelligent label for quickly accessing luminaire information using a QR code. Compact design, luminaire head length 450mm. Can be used in combination with the mast attachment (to be ordered separately) as a mast-top luminaire (spike size Ø 76 mm / Ø 60 mm, Jovie Z MB D...) or pole-side luminaire (spike size Ø 42 mm / Ø 60 mm, Jovie AZ MB D...). The inclination of the luminaire head is adjustable. Tilt angle for side-mounted mounting 0°, -5°, -10°, tilt angle for top-mounted mounting 0°, 5°, 10°, 15°. In MLT design (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. Asymmetrical medium-wide light distribution for area lighting, e.g. B. Parking lots and storage areas. Pre-irradiation 50°. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The light source can be replaced by qualified personnel. The LED system consists of MLT LED modules, each with 4 LEDs. Number of modules: 4. Rated luminous flux 4,200 lm, rated power 39.0 W, luminaire luminous efficacy 107 lm/W. Power factor ¿ 0.90. Efficiency version with material-optimized number of LEDs. General color rendering index (CRI) > 70, correlated color temperature (CCT) 3000 K. Other LED light colors available on request. Average rated service life LCLO (tq 25 °C) 100,000. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Color DB703 anthracite. Coating suitable for marine weather on request. With printed PMMA cover lens. Cover lens can be individually printed on customer request. Visible label protected against the effects of weather behind the cover lens on request. Protection class (EN 61140): 02, protection type (DIN EN 60529): 66, impact resistance level according to IEC 62262: IK09. Mast available on request. Wind attack area Fw (m²) = 0. Weight: 4.1 kg. The luminaire is connected without opening the luminaire body using the connecting cable that runs out the outside. The control gear can be replaced by qualified personnel. With UV-resistant silicone connecting cable for laying cables outdoors, e.g. when mounting on trusses. Length of connecting cable: 8 m. With electronic control gear and power reduction via control phase. Reduction to 50% of the luminaire luminous flux after the control phase is switched off. Configurable ballast with constant luminous flux (CLO). Connected load at end of service life: 40.00 W. Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire meets the requirements of the applicable EU directives and the product safety law (CE marking).It is also ENEC-certified by an independent testing institute. Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The luminaire meets the requirements of EN 60598 and is designed for wind effects in accordance with EN 1991 (Eurocode) with a base wind speed of up to 30 m/s (corresponds to wind zone 4 in Germany) in terrain category 1. This takes into account a snow load (up to 1 kN/m²) and icing (up to 2 cm) at a light point height in accordance with the installation instructions. Exposed locations (e.g. bridges, installation on buildings or directly next to railway tracks) are not taken into account. Impact loads are not taken into account. With Trilux after-sales promise: The luminaire is available for 10 years, spare parts (LED module, control gear and optical system) for 15 years after the invoice date. Reasonable changes in the interest of progress are reserved.
Type: Jovie 50I-AM2L-LR/4200-730 4G1 ET