Trilux Jovie 50-AB2L-LRA/2200-740 2G1 ET lamp 24W, 2200lm, 740 9002209151

Versatile outdoor mast light in a reduced, international design language and flat construction. With intelligent label for quickly calling up luminaire information using a QR code. Compact design, length of luminaire head 450mm. In combination with the mast attachment (ordered separately), it can be used as a mast-top luminaire (spike size Ø 76 mm / Ø 60 mm, Jovie Z MB D...) or a pole-side luminaire (spike size Ø 42 mm / Ø 60 mm, Jovie AZ MB D...). The inclination of the luminaire head is adjustable. Tilt angle for side-mounted mounting 0°, -5°, -10°, tilt angle for top-mounted mounting 0°, 5°, 10°, 15°. In MLT design (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. Asymmetrical wide beam light distribution for lighting streets according to P lighting classes and M lighting classes with a street width to light point height ratio of up to 2.0. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The light source can be replaced by qualified personnel. The LED system consists of MLT LED modules with 4 LEDs each. Number of modules: 2. Rated luminous flux 2,200 lm, rated power 20.0 W, luminaire luminous efficacy 110 lm/W. Power factor ¿ 0.90. Efficiency version with material-optimized number of LEDs. General color rendering index (CRI) > 70, correlated color temperature (CCT) 4000 K. Other LED light colors available on request. Average rated service life LCLO (tq 25 °C) 100,000. The light source is replaceable in accordance with ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Color DB703 anthracite. Coating suitable for marine weather on request. With PMMA cover plate, printed. Cover plate can be individually printed on customer request. Visible label behind the cover plate protected against the effects of weather on request. Protection class (EN 61140): 02, protection type (DIN EN 60529): 66, impact resistance level according to IEC 62262: IK09. Mast available on request. Wind attack area Fw (m²) = 0. Weight: 4.2 kg. The luminaire is connected without opening the luminaire body using the connecting cable that runs out the outside. The operating device can be replaced by qualified personnel. Length of the connecting cable: 8 m. With electronic operating device and power reduction via integrated evaluation electronics. Reduction of the luminaire luminous flux to 50% for a period of 7 hours (-2h/+5h), distributed around a daily determined midpoint of the duty cycle. Configurable ballast with constant luminous flux (CLO). Connected load at end of service life: 21.00 W. Control gear in accordance with DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020).The luminaire meets the requirements of the applicable EU directives and the Product Safety Act (CE marking). It is also ENEC-certified by an independent testing center. Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The luminaire meets the requirements of EN 60598 and is designed for wind effects in accordance with EN 1991 (Eurocode) with a base wind speed of up to 30 m/s (corresponds to wind zone 4 in Germany) in terrain category 1. This takes into account a snow load (up to 1 kN/m²) and icing (up to 2 cm) at a light point height in accordance with the installation instructions. Exposed locations (e.g. bridges, installation on buildings or directly next to railway tracks) are not taken into account. Impact loads are not taken into account. With Trilux after-sales promise: The luminaire is available for 10 years, spare parts (LED module, control gear and optical system) for 15 years after the invoice date. Reasonable changes that serve the purpose of progress are reserved.
Type: Jovie 50-AB2L-LRA/2200-740 2G1 ET

Features
Thermal Monitoring Technologies	Yes
CPU configuration (max)	1
Idle States	Yes
Thermal Design Power (TDP)	53 W
Maximum number of PCI Express lanes	16
Supported instruction sets	SSE4.1,SSE4.2
PCI Express configurations	1x8,1x16,2x4,2x8
PCI Express slots version	3.0
Embedded options available	No
Execute Disable Bit	Yes
Thermal solution specification	PCG 2013C
Scalability	1S
Memory
Memory channels supported by processor	Dual
Memory types supported by processor	DDR3-SDRAM
Maximum internal memory supported by processor	32 GB
Memory clock speeds supported by processor	1333 MHz
Memory bandwidth supported by processor (max)	21.3 GB/s
Processor
Processor frequency	3.2 GHz
Stepping	C0
Processor cache type	L3
Processor lithography	22 nm
System bus rate	5 GT/s
Processor cores	2
Processor operating modes	32-bit,64-bit
Processor model	G3258
Processor threads	2
Processor socket	Socket H3 (LGA 1150)
Box	No
Processor family	Intel Pentium G
Compatible chipsets	Intel Z97,Intel B85,Intel H81,Intel H87,Intel Z87
Processor cache	3 MB
Component for	PC
Other features
Intel	VT-x
Processor special features
Intel Virtualization Technology (VT-x)	Yes
Intel TSX-NI	No
Intel Stable Image Platform Program (SIPP)	No
Intel	No
Enhanced Intel SpeedStep Technology	Yes
Intel I/O Acceleration Technology	No
Intel VT-x with Extended Page Tables (EPT)	Yes
Conflict Free processor	Yes
Graphics
Maximum on-board graphics adapter memory	1.792 GB
On-board graphics adapter model	Intel HD Graphics
Number of displays supported (on-board graphics)	3
On-board graphics adapter	Yes
On-board graphics adapter base frequency	350 MHz
On-board graphics adapter dynamic frequency (max)	1100 MHz

---