Trilux Jovie 50-AB2L-SLR2/6800-740 6G1 ET side-mounted and surface-mounted luminaire 9002209018

Versatile outdoor mast light in a reduced, international design language and flat construction. With intelligent label for quickly calling up luminaire information using a QR code. Compact design, length of luminaire head 450mm. In combination with the mast attachment (ordered separately), it can be used as a mast-top luminaire (spike size Ø 76 mm / Ø 60 mm, Jovie Z MB D...) or a pole-side luminaire (spike size Ø 42 mm / Ø 60 mm, Jovie AZ MB D...). The inclination of the luminaire head is adjustable. Tilt angle for side-mounted mounting 0°, -5°, -10°, tilt angle for top-mounted mounting 0°, 5°, 10°, 15°. In MLT design (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. Asymmetrical wide beam light distribution for lighting streets according to P lighting classes and M lighting classes with a street width to light point height ratio of up to 2.0. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The light source can be replaced by qualified personnel. The LED system consists of MLT LED modules with 4 LEDs each. Number of modules: 6. Rated luminous flux 6,800 lm, rated power 59.0 W, luminaire luminous efficacy 115 lm/W. Power factor ¿ 0.90. Efficiency version with material-optimized number of LEDs. General color rendering index (CRI) > 70, correlated color temperature (CCT) 4000 K. Other LED light colors available on request. Average rated service life LCLO (tq 25 °C) 100,000. The light source is replaceable in accordance with ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Color DB703 anthracite. Coating suitable for marine weather on request. With PMMA cover plate, printed. Cover plate can be individually printed on customer request. Visible label behind the cover plate protected against the effects of weather on request. Protection class (EN 61140): 02, protection type (DIN EN 60529): 66, impact resistance level according to IEC 62262: IK09. Mast available on request. Wind attack area Fw (m²) = 0. Weight: 4.8 kg. The luminaire is connected without opening the luminaire body using the connecting cable that runs outwards. The operating device can be replaced by qualified personnel. Length of the connecting cable: 8 m. With electronic operating device and SLR equipment (Smart Lighting Ready) for the subsequent integration of components for lighting management systems. Standardized bases according to Zhaga are attached to the top of the luminaire head and to the lower cover. Configurable ballast with constant luminous flux (CLO). Connected load at end of life: 62.00 W. Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020).The luminaire meets the requirements of the applicable EU directives and the Product Safety Act (CE marking). It is also ENEC-certified by an independent testing center. Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The luminaire meets the requirements of EN 60598 and is designed for wind effects in accordance with EN 1991 (Eurocode) with a base wind speed of up to 30 m/s (corresponds to wind zone 4 in Germany) in terrain category 1. This takes into account a snow load (up to 1 kN/m²) and icing (up to 2 cm) at a light point height in accordance with the installation instructions. Exposed locations (e.g. bridges, installation on buildings or directly next to railway tracks) are not taken into account. Impact loads are not taken into account. With Trilux after-sales promise: The luminaire is available for 10 years, spare parts (LED module, control gear and optical system) for 15 years after the invoice date. Reasonable changes that serve the purpose of progress are reserved.
Type: Jovie 50-AB2L-SLR2/6800-740 6G1 ET