TRILUX ArimoFit G2 M59 DW19 IP 53-840 recessed luminaire 8173640

Rectangular LED recessed light with translucent cover panel DW. Version M59 (312.5 mm x 1550 mm). Version with increased protection class IP54 on the room side. The light can optionally be equipped with an emergency lighting system for ceiling installation with an emergency lighting operating time of 3 hours. In emergency light mode, the luminaire luminous flux is 500 lm. Creates a deeper spatial effect. Suitable for use in HACCP, IFS and/or BRC Global Standard Food certified companies (DIN 10500). For system ceilings with visible support rails. The light body is flush with the ceiling system on the room side. In combination with accessories that can be ordered separately, it is suitable for sawn ceiling openings and for flush-mounted installation. The Sky frame, which is optionally available as an accessory, creates a spatial atmosphere of depth in the classic, flat modular ceiling, replicating the 3-dimensional contour of a skylight. The optical system consists of a translucent, non-yellowing PMMA cover with a high degree of transmission. The surface of the cover is smooth and free of visible, microprismatic structures. With deep-wide beam light distribution. Glare rating according to UGR classification (EN 12464-1) 80. Average rated service life L80(tq 25 °C) = 100,000 h, average rated service life L90(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of extruded aluminum profile. Frame powder-coated white (RAL 9016). Luminaire dimensions (L x W x H): 1545 mm, 308 mm, 22 mm. The all-round edge of the frame profile makes installation easier. The luminaire frame is profiled in 3 dimensions to create a depth effect in the ceiling. The luminaire can be covered with insulation material at ta 25°C, and can also be used without insulation material at ta35 °C. Protection class (EN 61140): II, protection type (DIN EN 60529): IP54, protection type on the room side: IP54, shock resistance level according to IEC 62262: IK03, glow wire test temperature according to IEC 60695-2-11: 650 °C. Weight: 5.0 kg. Reverse polarity protected, quick connection with mains transmission up to Ø 2.5 mm2. The ballast is connected to the luminaire using a plug connection (plug and play). The packaging concept of the luminaire enables the operating device to be removed separately for pre-assembly, the other components of the luminaire remain protected until final assembly. With external operating device, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The control gear is idle-proof and protected against incorrect connection, short circuit, overload and overtemperature. Output ripple of the control gear = 4% for effective control of the LED system and flicker-free light. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE mark. The luminaire is part of a range of recessed, surface-mounted and suspended luminaires.which are coordinated in appearance. The product range's wide range of applications is further underlined by variants in the area of luminous flux packages, light distribution curves and protection classes. The basic range can be expanded to include project-specific luminaire features on request.
Type: ArimoFit G2 M59 DW19 IP 53-840 ET