TRILUX ArimoFit G2 M57 P-WW 42-840 ET recessed luminaire 31W 4200lm 8173440

Rectangular LED recessed light with microprismatic cover P-WW. Version M57 (312.5 mm x 1250 mm). The light can optionally be equipped with an emergency lighting system for ceiling installation with an emergency lighting operating time of 3 hours. In emergency light mode, the luminaire luminous flux is 500 lm. Creation of a deeper spatial effect. For system ceilings with visible support rails. The luminaire body is flush with the ceiling system on the room side. In combination with accessories that must be ordered separately, suitable for sawn ceiling openings and for flush-mounted installation. The optical system consists of a highly efficient PMMA cover with microprismatics. Wallwasher with asymmetrical light intensity distribution. Harmonious lighting effect through evenly illuminated light emission. Individual design of the light emission surface (e.g. by printing) and other special solutions available on request. Luminaire luminous flux and light color are fixed. Rated luminous flux 4200 lm, rated power 31 W, maximum luminaire luminous efficacy 135 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 100,000 h, average rated service life L90(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of extruded aluminum profile. Surface coated white (RAL 9016). Luminaire dimensions (L x W x H): 1245 mm, 308 mm, 22 mm. The all-round edge of the frame profile makes installation easier. The luminaire frame is profiled in 3 dimensions to create a depth effect in the ceiling. The luminaire can be covered with insulation material at ta 25°C, and can also be used without insulation material at ta35 °C. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20, protection type on the room side: IP20, shock resistance level according to IEC 62262: IK03, glow wire test temperature according to IEC 60695-2-11: 650 °C. Weight: 3.6 kg. Reverse polarity protected, quick connection with mains transmission up to Ø 2.5 mm2. The ballast is connected to the luminaire using a plug connection (plug and play). The packaging concept of the luminaire enables the operating device to be removed separately for pre-assembly, the other components of the luminaire remain protected until final assembly. With external operating device, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Control gear is idle-proof and protected against incorrect connection, short circuit, overload and overtemperature. Output ripple of the control gear = 4% for effective control of the LED system and flicker-free light. ENEC certification by an independent testing body is in preparation. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.The luminaire is part of a range of recessed, surface-mounted and suspended luminaires that are coordinated in appearance. The product range's wide range of applications is further underlined by variants in the area of luminous flux packages, light distribution curves and protection classes. On request, the basic range can be expanded to include project-specific luminaire features. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes that serve progress.
Type: ArimoFit G2 M57 P-WW 42-840 ET