Trilux 8123251 LnPlus 40-AM19L/15000-730 12G1 ETDD luminaire 121 W 15000 lm content_copy

The Trilux LnPlus 40-AM19L/15000-730 12G1 ETDD is an LED floodlight for area lighting in outdoor applications. It is designed for use in installations exposed to high mechanical and climatic loads and meets the requirements of standard EN 60598. The luminaire is designed for wind loads according to EN 1991 (Eurocode), with a basic wind speed of up to 30 m/s, corresponding to wind zone 4 in Germany in terrain category 1. The mounting bracket is made of aluminium die-cast and features three holes, allowing both 2-point mounting and central 1-point mounting. The spotlight head is pivotable on the mounting bracket via single-point mounting and can be fixed in the desired position using toothed locking mechanisms. At delivery, the spotlight head and mounting bracket are already assembled. Mast mounting for single and multiple applications is possible with accessories.

Applications
This luminaire is suitable for lighting large outdoor areas such as industrial halls, parking lots, sports grounds, or warehouses. The asymmetric medium-wide light distribution ensures even and efficient illumination of the area. Additional beam characteristics are available to flexibly support customer-specific lighting tasks. The luminaire is designed for outdoor use, with ambient temperatures ranging from -40 °C to 25 °C.

Functions and Equipment in Detail
The luminaire features an LED system with 12 MLT-LED modules, each consisting of four LEDs. The rated luminous flux is 15000 lm at a rated power of 109 W, corresponding to a maximum luminous efficacy of 138 lm/W. The light colour is warm white with a correlated colour temperature (CCT) of 3000 K. A Tunable White version (2200 K – 4000 K) is available upon request. The general colour rendering index (CRI) is over 70, and the colour tolerance (initial MacAdam) is 5 SDCM. The mean rated lifetime (LCLO) at an ambient temperature of 25 °C is 100,000 hours. The light source is replaceable according to ecodesign requirements (VO (EU) 2019/2020). Flicker is specified as Pst LM = 1.0 at full load.

Technology Explained Simply
The MLT version (Multi-Lens Technology) consists of highly efficient, UV- and temperature-resistant lens systems arranged in a quadruple configuration. This technology ensures precise light distribution and high luminous efficacy. The electronic ballast is digitally dimmable and complies with the DALI-2 standard (EN 62386). It is also replaceable according to ecodesign requirements. The surge voltage resistance is 6 kV in differential mode and 10 kV in common mode. The luminaire is ball impact resistant according to DIN 18032-3.

Compatibility and Accessories
The luminaire is suitable for mounting on masts, with accessories available for single and multiple applications. The light source and ballast are replaceable, extending maintenance and the lifespan of the installation. The luminaire is equipped with an electronic ballast that supports DALI control.

Mounting and Installation
The aluminium die-cast mounting bracket allows for flexible mounting. The three holes enable both 2-point and 1-point mounting. The pivotability of the spotlight head and the locking mechanisms facilitate alignment. The luminaire is delivered pre-assembled, accelerating installation.

Operational Advantages
The high luminous efficacy and luminous flux maintenance at the end of life (CLO) ensure efficient and reliable lighting throughout the entire service life. The protection rating IP66 and impact resistance rating IK09 ensure high resistance to dust, water, and mechanical impacts. The powder-coated surface of the luminaire housing is highly weather-resistant. The luminaire is CE-marked and additionally ENEC-certified. Availability of spare parts (LED module, ballast, optical system) is guaranteed for 15 years after the invoice date, subject to reasonable modifications. The luminaire itself is available for 10 years.

Protection Rating, Protection Class and Environmental Conditions
The protection rating IP66 safeguards the luminaire against dust and water, even under heavy splashing, making it suitable for outdoor use. Protection class I requires a protective earth connection. The ambient temperature must be between -40 °C and 25 °C. The luminaire is designed for use in terrain category 1 and wind zone 4 in Germany.

Colour Design and Materials
The luminaire body is anthracite (similar to DB 703), and the mounting bracket is silver grey (similar to RAL 9006). The colours are distinctly contrasted. The housing is made of aluminium die-cast and powder-coated. The end cap is made of flat toughened safety glass and is mounted in a carrier frame. Additional colour variants according to RAL or DB colour code are possible.

Dimensions and Weight
The dimensions are 503 mm (length) × 390 mm (width) × 240 mm (height). The weight of the luminaire is 8.0 kg.

Certification and Conformity
The luminaire meets the essential requirements of applicable EU directives and the Product Safety Act. It carries the CE marking and is additionally ENEC-certified by an independent testing body. Availability of spare parts is guaranteed for 15 years after the invoice date, subject to reasonable modifications. The luminaire itself is available for 10 years.

General
Degree of protection	IP66
Protection class	I
Shock resistance rating	IK09
Rated luminous flux	15000 lm
Rated power	109 W
Luminous efficacy	138 lm/W
Colour temperature	3000 K
CRI	> 70
Colour tolerance	5 SDCM
Flicker	Pst LM = 1.0 at full load
Dimmability	DALI
Surge voltage withstand (Differential Mode)	6 kV
Surge voltage withstand Common Mode	10 kV
Ambient temperature	-40 to 25 °C
Luminaire body material	Aluminium die-cast
End plate material	Single-pane safety glass
Luminaire body colour	anthracite (similar to DB 703)
Colour of mounting bracket	Silver grey (similar to RAL 9006)
Mounting method	2-point and 1-point mounting
Latching	toothed
Accessories	mast mounting possible
Eco-design	replaceable light source and control gear
Certification	CE, ENEC
Luminaire availability	10 years
Availability of spare parts	15 years
Light sharing	asymmetric medium wide
Technology	MLT (Multi-Lens Technology)
Ball impact resistance	According to DIN 18032-3
Swivelling capability

---