Trilux AragF 12 PVW 23-840 ET CR damp-proof luminaire 15W, 7540540

LED damp-proof luminaire IP 66 for use in applications with high demands on variability, efficiency, light quality and technology. The luminaire is part of a range with identical, installation-compatible variants. These variants are available with alternative optical systems, light engines with adjustable luminous fluxes and with connection options to light management and emergency lighting systems. Suitable for use in HACCP, IFS and/or BRC Global Standard Food certified companies. Surface-mounted luminaire for damp rooms, covered and uncovered outdoor areas. With limited surface temperature, suitable for use in fire-hazardous rooms in accordance with DIN EN 60598-2-24. With clipless locking technology for easy installation of the diffuser cover and luminaire body in accordance with the protection class after connection. Suspended installation possible using optional accessories. Ceiling mounting using the enclosed stainless steel mounting bracket. Suspended installation possible using optional accessories. With a prismatic, photometrically effective, translucent cover made of polyamide, direct beam. With symmetrical, extra wide beam light distribution. Luminaire luminous flux and light color fixed. Rated luminous flux 2300 lm, rated power 15 W, maximum luminaire luminous efficacy 153 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 35 °C) = 70,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of polyamide with good chemical resistance to organic solvents. Luminaire body color light gray (RAL 7035). Dimensions (L x W): 1257 mm x 102 mm, luminaire height 91 mm. Permissible ambient temperature (ta): -30 °C - +35 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP 66, shock resistance level according to IEC 62262: IK07, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 2.8 kg. With 3-pin connection terminal up to 2.5 mm2. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years, spare parts (LED module, control gear, optical system) available 15 years after invoice date subject to reasonable changes in the interests of progress.
Type: AragF 12 PVW 23-840 ET CR

Design
Built-in display	No
LED indicators	Yes
On/off switch	Yes
Features
Operating system installed	Linux Embedded
Cable lock slot	Yes
Weight & dimensions
Depth	205 mm
Width	87 mm
Weight	2400 g
Height	128 mm
Memory
Internal memory	0.5 GB
Internal memory type	DDR3
Ports & interfaces
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	1
Ethernet interface type	Gigabit
Power
Power consumption (typical)	25 W
AC input voltage	100-240 V
AC input frequency	50/60 Hz
Processor
Processor frequency	1.2 GHz
Processor cores	2
Processor family	Marvell ARMADA 370
Processor model	370
Operational conditions
Operating relative humidity (H-H)	20 - 80 %
Operating temperature (T-T)	5 - 35
Storage
Hot-swap drive bays	No
Hard drive interface	Serial ATA II
Number of hard drives supported	2
RAID support	Yes
Maximum storage capacity	4 TB
RAID levels	1,JBOD
Packaging content
Quick installation guide	Yes

---