Theben 1890801 Switching clock SUL 189 s
|
169,40 EUR 176,54 EUR |
|||||||||||
|
( 201,59 EUR incl. VAT ) ≈ £141.79 | ≈ $186.17 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1239664 | ||||||||||
| Mfg Part No: | 1890801 | ||||||||||
| UPC/EAN: | 4003468180631 | ||||||||||
| Weight: | 0.2498 kg | ||||||||||
| Type: | SUL 189 s | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Theben 1890801:
Applications
The SUL 189 s is suitable for use in residential and commercial buildings where automated, time-controlled switching functions for lighting, heating, or other electrical loads are required. Due to its IP20 protection rating, the device is suitable for indoor use, but not for damp or dusty environments. The ambient temperature must range between -10 °C and +55 °C, allowing use under typical indoor conditions. The switching capacity is 10 A at 250 V AC with a power factor of cos φ = 1; at cos φ = 0.6, it is 2 A. The switching circuit is potential-free and phase-independent, enabling flexible integration into existing installations.
Functions and Features in Detail
The device features a quartz-controlled stepper motor that drives the mechanical time display and program control. The time is displayed via an analog clock hand, visually indicating the current time. Programming is done via a switching selection, with segments programmable in 15-minute intervals. A permanent ON/OFF switch allows manual override of the program. The switching status indicator shows the current state of the output. Summer and winter time adjustments can be easily made, with time correction possible both clockwise and counterclockwise.
Technology Explained Simply
The SUL 189 s operates with an analog daily program controlled by 96 switching segments. Each segment corresponds to 15 minutes, dividing a full day into 96 intervals. The quartz control ensures high time measurement accuracy, allowing switching times to be precisely maintained. The timekeeping reserve provided by the NiMH cell ensures the program remains intact during power outages. Switching capacity depends on the power factor, with higher capacity possible under purely resistive loads (cos φ = 1) compared to inductive loads (cos φ = 0.6). The potential-free and phase-independent circuit enables flexible use in various installation configurations.
Compatibility and Accessories
The SUL 189 s is designed for installation in standard front panels with dimensions of 72 x 72 mm. As an accessory, a quick-mounting bracket with part number 9070071 is available, facilitating easy installation. Connections are made via screw terminals, ensuring secure and reliable connections. The operating voltage is 230 V AC, with a frequency range of 50 to 60 Hz. The Class II protection rating according to EN 60 730-1 ensures high safety during operation.
Installation and Mounting
Mounting is done either into a front panel or directly onto a wall. The front frame with dimensions 72 x 72 mm allows for standardized installation. The spring clamp facilitates secure fastening. The terminal screws are designed for connection to electrical cables. The standby power consumption is 0.5 W, ensuring low energy consumption in standby mode.
Operational Advantages
The SUL 189 s offers reliable and precise time control with high timekeeping accuracy. The three-day timekeeping reserve ensures the program remains intact even during short-term power outages. Simple programming and the ability to manually override the program using the permanent ON/OFF switch increase operational flexibility. The potential-free circuit allows flexible integration into existing installations. The IP20 protection rating and Class II safety rating ensure safe use in indoor environments.
| General | |
| Operating voltage | 230 V AC |
| Frequency | 50–60 Hz |
| Number of channels | 1 |
| Mounting method | Panel mounting/wall mounting |
| Connection type | Screw terminals |
| Drive | Quartz-controlled stepper motor |
| Program | Daily program |
| Autonomy | approx. 3 days |
| Switching power at 250 V AC, cos φ = 1 | 10 A |
| Switching power at 250 V AC, cos φ = 0.6 | 2 A |
| Contact type | Change-over contact |
| Switching output | Potential-free and phase-independent |
| Number of switching segments | 96 |
| Shortest switching time | 15 min |
| Step accuracy at 25 °C | ≤ ±1 s/day |
| Stand-by power | 0,5 W |
| Degree of protection | IP20 |
| Protection class | II according to EN 60 730-1 |
| Ambient temperature | -10°C ... 55°C |
Questions & answers
What is the delivery time of Theben 1890801 Switching clock SUL 189 s?
The article Theben 1890801 Switching clock SUL 189 s is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Theben 1890801 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Theben 1890801 Switching clock SUL 189 s always at the best possible price. We can give you a discount of 2% on Theben 1890801 Switching clock SUL 189 s if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Theben 1890801 Switching clock SUL 189 s we can offer you a price of 163,05 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

