Theben 1890801, EAN: 4003468180631

Theben 1890801 SUL 189 s switching clock

Installation > Modular devices / equipment installation > Timer Switches

Theben 1890801 SUL 189 s switching clock

Lieske Part No. 1239664
Mfg Part No 1890801
EAN-Code 4003468180631
Manufacturer Theben
Here only 169,40 EUR
201,59 EUR incl. VAT

Further information for Theben 1890801 SUL 189 s switching clock

General
Operating voltage230 V AC
Frequency50–60 Hz
Number of channels1
Mounting methodPanel mounting/wall mounting
Connection typeScrew terminals
DriveQuartz-controlled stepper motor
ProgramDaily program
Autonomyapprox. 3 days
Switching power at 250 V AC, cos φ = 110 A
Switching power at 250 V AC, cos φ = 0.62 A
Contact typeChange-over contact
Switching outputPotential-free and phase-independent
Number of switching segments96
Shortest switching time15 min
Step accuracy at 25 °C≤ ±1 s/day
Stand-by power0,5 W
Degree of protectionIP20
Protection classII according to EN 60 730-1
Ambient temperature-10°C ... 55°C
The Theben SUL 189 s is an analog time switch designed for use in electrical installations, mounted via a plug socket and a front frame with dimensions of 72 x 72 mm. The device is used for time-controlled switching of loads, such as lighting or heating, and is intended for installation in front panels or on walls. It features a daily program with 96 switching segments, enabling fine-grained time control in a 24-hour cycle. The shortest switching interval is 15 minutes, allowing even short switching operations to be programmed. The quartz-controlled mechanism ensures high timekeeping accuracy of ≤ ±1 second per day at an ambient temperature of 25 °C. The clock is equipped with a NiMH cell, providing a timekeeping reserve of approximately three days, ensuring the program remains intact even during power outages.

Applications
The SUL 189 s is suitable for use in residential and commercial buildings where automated, time-controlled switching functions for lighting, heating, or other electrical loads are required. Due to its IP20 protection rating, the device is suitable for indoor use, but not for damp or dusty environments. The ambient temperature must range between -10 °C and +55 °C, allowing use under typical indoor conditions. The switching capacity is 10 A at 250 V AC with a power factor of cos φ = 1; at cos φ = 0.6, it is 2 A. The switching circuit is potential-free and phase-independent, enabling flexible integration into existing installations.

Functions and Features in Detail
The device features a quartz-controlled stepper motor that drives the mechanical time display and program control. The time is displayed via an analog clock hand, visually indicating the current time. Programming is done via a switching selection, with segments programmable in 15-minute intervals. A permanent ON/OFF switch allows manual override of the program. The switching status indicator shows the current state of the output. Summer and winter time adjustments can be easily made, with time correction possible both clockwise and counterclockwise.

Technology Explained Simply
The SUL 189 s operates with an analog daily program controlled by 96 switching segments. Each segment corresponds to 15 minutes, dividing a full day into 96 intervals. The quartz control ensures high time measurement accuracy, allowing switching times to be precisely maintained. The timekeeping reserve provided by the NiMH cell ensures the program remains intact during power outages. Switching capacity depends on the power factor, with higher capacity possible under purely resistive loads (cos φ = 1) compared to inductive loads (cos φ = 0.6). The potential-free and phase-independent circuit enables flexible use in various installation configurations.

Compatibility and Accessories
The SUL 189 s is designed for installation in standard front panels with dimensions of 72 x 72 mm. As an accessory, a quick-mounting bracket with part number 9070071 is available, facilitating easy installation. Connections are made via screw terminals, ensuring secure and reliable connections. The operating voltage is 230 V AC, with a frequency range of 50 to 60 Hz. The Class II protection rating according to EN 60 730-1 ensures high safety during operation.

Installation and Mounting
Mounting is done either into a front panel or directly onto a wall. The front frame with dimensions 72 x 72 mm allows for standardized installation. The spring clamp facilitates secure fastening. The terminal screws are designed for connection to electrical cables. The standby power consumption is 0.5 W, ensuring low energy consumption in standby mode.

Operational Advantages
The SUL 189 s offers reliable and precise time control with high timekeeping accuracy. The three-day timekeeping reserve ensures the program remains intact even during short-term power outages. Simple programming and the ability to manually override the program using the permanent ON/OFF switch increase operational flexibility. The potential-free circuit allows flexible integration into existing installations. The IP20 protection rating and Class II safety rating ensure safe use in indoor environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1239664
qrcode für Theben 1890801 SUL 189 s switching clock