Screw-Driver-Bits from Cimco

You have been filtering for Cimco and therefore you see now only Screw-Driver-Bits from Cimco displayed.
You can choose other manufacturers on the left side in the menu or get the complete overview.

Screw-Driver-Bits from Cimco

Cimco 114508 single bit standard PH1 L90 mm according to DIN 3128 Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 371360
Mfg Part No: 114508

5,51 EUR 5,64 EUR

≈ £4.61 | ≈ $6.17

Made to order · Delivery time approx. 20 workdays

Cimco 114509 single bit standard PH2 L90 mm according to DIN 3128 Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 883947
Mfg Part No: 114509

5,51 EUR 5,64 EUR

≈ £4.61 | ≈ $6.17

Made to order · Delivery time approx. 20 workdays

Cimco 114510 single bit standard PH3 L90 mm according to DIN 3128 Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 335201
Mfg Part No: 114510

5,51 EUR 5,64 EUR

≈ £4.61 | ≈ $6.17

Made to order · Delivery time approx. 20 workdays

Cimco 114511 single bit standard PH1 L25 mm according to DIN 3128 Bitflex bits, the damping zone (only for bits with a length of 25 mm) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces.

Lieske Part No.: 743937
Mfg Part No: 114511

3,10 EUR 3,16 EUR

≈ £2.59 | ≈ $3.47

Made to order · Delivery time approx. 20 workdays

Cimco 114512 single bit standard PH2 L25 mm according to DIN 3128 Bitflex bits, the damping zone (only for bits with a length of 25 mm) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces.

Lieske Part No.: 148380
Mfg Part No: 114512

3,10 EUR 3,16 EUR

≈ £2.59 | ≈ $3.47

Made to order · Delivery time approx. 20 workdays

Cimco 114513 single bit standard PH3 L25 mm according to DIN 3128 Bitflex bits, the damping zone (only for bits with a length of 25 mm) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces.

Lieske Part No.: 581208
Mfg Part No: 114513

3,10 EUR 3,16 EUR

≈ £2.59 | ≈ $3.47

Made to order · Delivery time approx. 20 workdays

Cimco 114516 single bit standard PZ2 L25 mm according to DIN 3128 Bitflex bits, the damping zone (only for bits with a length of 25 mm) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces.

Lieske Part No.: 822262
Mfg Part No: 114516

3,10 EUR 3,16 EUR

≈ £2.59 | ≈ $3.47

Made to order · Delivery time approx. 20 workdays

Cimco 114518 single bit standard PZ1 L90 mm according to DIN 3128 Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 513938
Mfg Part No: 114518

5,51 EUR 5,64 EUR

≈ £4.61 | ≈ $6.17

Made to order · Delivery time approx. 20 workdays

Cimco 114519 single bit standard PZ2 L90 mm according to DIN 3128 Bitflex bits: the dampening zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 448176
Mfg Part No: 114519

5,51 EUR 5,64 EUR

≈ £4.61 | ≈ $6.17

Delivery time from supplier's stock (ca.) 5 workdays

Cimco 114520 single bit standard PZ3 L90 mm according to DIN 3128 Bitflex bits: the dampening zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 423350
Mfg Part No: 114520

5,51 EUR 5,64 EUR

≈ £4.61 | ≈ $6.17

Made to order · Delivery time approx. 20 workdays

Cimco 114573 standard bit TORX T10x90 mm for TORX screws with hole Bitflex Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 796565
Mfg Part No: 114573

7,98 EUR 8,17 EUR

≈ £6.68 | ≈ $8.93

Made to order · Delivery time approx. 20 workdays

Cimco 114574 standard bit TORX T15x90 mm for TORX screws with hole Bitflex Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 118830
Mfg Part No: 114574

7,98 EUR 8,17 EUR

≈ £6.68 | ≈ $8.93

Made to order · Delivery time approx. 20 workdays

Cimco 114575 standard bit TORX T20x90 mm for TORX screws with hole Bitflex Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 895075
Mfg Part No: 114575

7,98 EUR 8,17 EUR

≈ £6.68 | ≈ $8.93

Delivery time from supplier's stock (ca.) 5 workdays

Cimco 114576 standard bit TORX T25x90 mm for TORX screws with hole Bitflex Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...

Lieske Part No.: 360080
Mfg Part No: 114576

7,98 EUR 8,17 EUR

≈ £6.68 | ≈ $8.93

Made to order · Delivery time approx. 20 workdays

Cimco 114599 special bit set 33-piece assortment for loosening security screws Special Bit Set
Bit set to delete security screws. Content 1 of each magnet holder 60 mm for 1/10,2 cm ( 4 inch )-Bitantrieb, bits TORX (R) with hole (tamper resistant)
T8 - T10 - T15 - T20 - T25 ...

Lieske Part No.: 177484
Mfg Part No: 114599

47,10 EUR 47,80 EUR

≈ £39.42 | ≈ $52.70

Delivery time from supplier's stock (ca.) 5 workdays

Cimco 114602 bit set Electro Top 21-piece Phillips, Pozidriv, Torx Bit set ELECTRO TOP
21-piece set consisting of 1 universal holder with permanent magnet, length 60 mm, each two piece bits Phillips Philips PH 1, PH 2, PH 3, Phillips Pozidriv PZ 1, PZ 2, PZ 3, TORX ...

Lieske Part No.: 637923
Mfg Part No: 114602

44,75 EUR 45,41 EUR

≈ £37.46 | ≈ $50.08

Delivery time from supplier's stock (ca.) 3 workdays

Cimco 114606 bit set 50-piece assortment, long safety bits Special bit set 75 mm, 50 pieces, for working on all types of screws, especially security and special screws, thanks to the extra length of 75 mm, also ideal for hard-to-reach places in confined ...

Lieske Part No.: 722412
Mfg Part No: 114606

41,12 EUR 41,72 EUR

≈ £34.42 | ≈ $46.01

Delivery time from supplier's stock (ca.) 3 workdays

Cimco 114941 single bit PZ170 combined slot-cross slot screwdriver Module bit for combined slotted and Phillips screws on electrical systems, e.g. terminal blocks, PZ FL1, dimensions: 70 mm. The damping zone (only for bits with a length of 25 mm) between the drive ...

Lieske Part No.: 727397
Mfg Part No: 114941

5,78 EUR 5,91 EUR

≈ £4.84 | ≈ $6.47

Made to order · Delivery time approx. 20 workdays

Cimco 114942 single bit PZ270 combined slot/cross slot screwdriver bits Module bit for combined slotted/Phillips screws on electrical systems, e.g. terminal blocks, PZ FL2, dimensions: 70 mm. The damping zone (only for bits with a length of 25 mm) between the drive and ...

Lieske Part No.: 652680
Mfg Part No: 114942

5,78 EUR 5,91 EUR

≈ £4.84 | ≈ $6.47

Made to order · Delivery time approx. 20 workdays

Cimco 201984 countersink bit 90° D10.4 mm M5 L34 mm DIN3126 shaft 1/4 inch Countersink bit 90° made of HSS, 3 cutting edges, axially and radially relief ground, shaft 1/4 'according to DIN 3126. Design: Ø: 10.4 mm, for M: 5, length: 31 mm. PU: 1

Lieske Part No.: 507298
Mfg Part No: 201984

21,93 EUR 22,43 EUR

≈ £18.36 | ≈ $24.54

Made to order · Delivery time approx. 20 workdays

Cimco 201985 HSS countersink bit 90° 12.4 mm M6 L35 mm DIN 3126 1/4 inch Countersink bit 90° made of HSS, 3 cutting edges, axially and radially relief ground, shaft 1/4 'according to DIN 3126. Design: Ø: 12.4 mm, for M: 6, length: 31 mm. PU: 1

Lieske Part No.: 303097
Mfg Part No: 201985

23,92 EUR 24,46 EUR

≈ £20.02 | ≈ $26.77

Made to order · Delivery time approx. 20 workdays

Cimco 201986 countersink bit 90° D16.5 mm M8 L38 mm DIN3126 shaft 1/4 inch Countersink bit 90° made of HSS, 3 cutting edges, axially and radially relief ground, shaft 1/4 'according to DIN 3126. Design: Ø: 16.5 mm, for M: 8, length: 31 mm. PU: 1

Lieske Part No.: 870717
Mfg Part No: 201986

27,33 EUR 27,95 EUR

≈ £22.88 | ≈ $30.58

Made to order · Delivery time approx. 20 workdays

Cimco 201987 HSS countersink bit 90° 20.5 mm M10 L42 mm DIN 3126 1/4 inch Countersink bit 90° made of HSS, 3 cutting edges, axially and radially relief ground, shaft 1/4 'according to DIN 3126. Design: Ø: 20.5 mm, for M: 10, length: 31 mm. PU: 1

Lieske Part No.: 240301
Mfg Part No: 201987

31,10 EUR 31,81 EUR

≈ £26.03 | ≈ $34.80

Made to order · Delivery time approx. 20 workdays

Cimco 201989 countersink bit 90° each 1 piece 6.3–20.5 mm 6-piece Countersunk bit 90° assortment, 6-piece, in a sheet steel cassette. Design: 1 countersunk bit each 6.3-20.5 mm in Ø, pack of 1

Lieske Part No.: 320902
Mfg Part No: 201989

175,93 EUR 179,88 EUR

≈ £147.25 | ≈ $196.87

Made to order · Delivery time approx. 20 workdays

Bits for cordless screwdrivers and bit holders — slot, PH1-3, PZ1-3, Torx T10–T40, hex 2–10 mm. Torsion bits (e.g. Bosch Impact Control, Wera Impaktor) for impact drivers. Parent category: power tool accessories.

Parent: power tool accessories.

Why industry-electronics.de?

▶

Professional Tools for B2B

Over 20,000 tool products from Knipex, Wiha, Wera, Weidmüller, Bosch Professional and other leading brands — exclusively for commercial buyers.

▶

VDE & Standards Compliant

Our range includes VDE-tested tools per EN 60900 (1,000 V), PPE per EN ISO standards, and CE-compliant power tools for professional use.

▶

Expert Advice & Project Pricing

Our tool team advises on equipment selection, standards compliance and bulk orders — tiered pricing, project rates and framework contracts on request.

▶

Fast Availability

Most items ship from stock — free delivery across Germany above minimum order value. Express delivery available for urgent site and service jobs.

▶

Tested Brand Quality

Only genuine branded goods — no no-name products. Every tool meets the relevant safety and quality standards.

▶

20+ Years Experience

For over 20 years, industry-electronics.de has supplied electricians, network technicians, industrial firms and public authorities with professional tools.