Stripper in Pliers

Stripper from Phoenix Contact

Phoenix Contact 1212157 Stripping tool - WIREFOX 16-1 - Stripping pliers, for cables and conductors with a cross section of 6 ‑ 16 mm², self-adjusting, any stripping length, also suitable for sensor/actuator cables Lieske Part No.: 377963 Mfg Part No: 1212157 Type: WIREFOX 16-1

86,23 EUR 86,90 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212158 Stripping tool - WIREFOX 6SC - Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity ... Lieske Part No.: 144942 Mfg Part No: 1212158 Type: WIREFOX 6SC

79,03 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212160 Stripping tool - WIREFOX-D 11 - Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm Lieske Part No.: 144952 Mfg Part No: 1212160 Type: WIREFOX-D 11

31,78 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212161 Stripping tool - WIREFOX-D 40 - Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and spiral cuts Lieske Part No.: 144954 Mfg Part No: 1212161 Type: WIREFOX-D 40

44,27 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212162 Stripping tool - WIREFOX-D 13 - Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife Lieske Part No.: 144959 Mfg Part No: 1212162 Type: WIREFOX-D 13

32,53 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212172 Stripping tool - WIREFOX-D SHIELD - Stripping pliers, for removing jackets from cables for cable cutouts, cable tap-offs, and shield connections with a diameter of 8 - 9 mm diameter, insulation thickness of up to 1.2 mm, stripping ... Lieske Part No.: 144960 Mfg Part No: 1212172 Type: WIREFOX-D SHIELD

66,32 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212173 Stripping tool - WIREFOX-D 16 - Stripping tool, for stripping lines (specially for fiber optics lines) of Ø 4 - 16 mm Lieske Part No.: 144966 Mfg Part No: 1212173 Type: WIREFOX-D 16

14,56 EUR 15,16 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212174 Stripping tool - WIREFOX-D 28 - Stripping tool, for stripping lines of Ø 8 - 28 mm Lieske Part No.: 144967 Mfg Part No: 1212174 Type: WIREFOX-D 28

14,56 EUR 15,16 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212366 Stripping tool - WIREFOX 10 VDE - Stripping pliers, for stripping conductors with a cross section of up to 10 mm², VDE-tested Lieske Part No.: 144970 Mfg Part No: 1212366 Type: WIREFOX 10 VDE

24,72 EUR 25,75 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212368 Stripping tool - WIREFOX 2,5 - Stripping tool, for conductors and cables with a conductor cross section from 0.08 to 2.5 mm, self-adjusting, stripping length adjustable up to 15 mm, cutting capacity up to 6 mm² stranded/1.5 ... Lieske Part No.: 802768 Mfg Part No: 1212368 Type: WIREFOX 2,5

76,42 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212528 Stripping tool - WIREFOX-MP VDE - Multifunction stripping tool, for removing the jacket from cables with a diameter of 8 to 13 mm, for stripping cables with a cross section of 0.2 to 10 mm², with full-fledged diagonal cutter, VDE ... Lieske Part No.: 660283 Mfg Part No: 1212528 Type: WIREFOX-MP VDE

57,35 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 1212623 Stripping tool - WIREFOX SAC - Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length Lieske Part No.: 712636 Mfg Part No: 1212623 Type: WIREFOX SAC

105,82 EUR plus delivery charges Delivery time on requestinfo_outline

Phoenix Contact 2744623 Stripping tool - PSM-STRIP-FC/PROFIB - Quick stripping tool for PROFIBUS cable, type Fast Connect Lieske Part No.: 782897 Mfg Part No: 2744623 Type: PSM-STRIP-FC/PROFIB

206,95 EUR plus delivery charges Delivery time on requestinfo_outline

Stripper from Rutenbeck

Rutenbeck 39200002 UA Universal Stripper, data cable for D = 2-H = 110mm 10mm gray Universal stripper, for data cables 2 - 10 mm Ø, shielded and unshielded, functions: cutting, stripping, stripping round and flat cables, - for data cables with Ø 2 to 10 mm, - for cutting, ... Lieske Part No.: 963038 Mfg Part No: 39200002 Type: UA

37,13 EUR plus delivery charges Delivery time on requestinfo_outline

Stripper from Telegärtner

Telegärtner 100025908 N04001A0031 Stripping f., Cable sheath u.Primärcoating Notes: included in the assembly case Fire protection class: Not relevant Burning droplets: Not relevant Smoke development: Not relevant Acid development: Not relevant Description: Stripping tool for ... Lieske Part No.: 858705 Mfg Part No: 100025908

183,02 EUR plus delivery charges Delivery time on requestinfo_outline

Stripper from U.I. Lapp

U.I. Lapp 21124030 Lapp Stripper FC STRIP total, Stripping tool STRIPPING TOOL FC STRIP, Stripping tool, Cable diameter: 2.5mm - 8.0mm, , Areas of application: Other blade cassettes on request, Two-stage stripping tool for Fast-Connect cables with ... Lieske Part No.: 309552 Mfg Part No: 21124030 Type: ABMANTELWERKZEUG FC

131,81 EUR plus delivery charges Delivery time on requestinfo_outline

U.I. Lapp 21920120 LAPP Universal strip SOLAR 1,5-6, Stripping / stripping tool Stripping tool UNIVERSAL STRIP SOLAR, stripping tool, conductor cross-section 1.5mm² - 6mm², , Areas of application: Universal stripping pliers with interchangeable stripping blades for special ... Lieske Part No.: 436853 Mfg Part No: 21920120 Type: UNIVERSAL STRIP SOLA

164,65 EUR plus delivery charges Delivery time on requestinfo_outline

U.I. Lapp 61735800 Lapp Abisolier-/Abmantelwerkzeug, EASY STRIP 2 INCL. X-TRAY Stripping tool EASY STRIP INCL. STRAIGHT CARTRIDGE, stripping tool, conductor cross-section 0.02mm² - 10mm², , Areas of application: Replaceable cassettes enable processing of a variety of different ... Lieske Part No.: 138321 Mfg Part No: 61735800 Type: EASY STRIP 2 INKL. X

109,87 EUR plus delivery charges Delivery time on requestinfo_outline

U.I. Lapp 61735803 LAPP EASY STRIP 2 V-paneled, Stripping / stripping tool Knife cassette EASY STRIP V-CARTRIDGE, knife cassette, conductor cross-section 0.1mm² - 4mm², , Areas of application: Replaceable cassettes enable processing of a variety of different insulation ... Lieske Part No.: 437058 Mfg Part No: 61735803 Type: EASY STRIP 2 V-KASSE

45,05 EUR plus delivery charges Delivery time on requestinfo_outline

U.I. Lapp 61735805 LAPP EASY STRIP 2 including V-CASSETTE stripping/stripping tool Stripping tool EASY STRIP INCL. V-CARTRIDGE, stripping tool, conductor cross-section 0.1mm² - 4mm², , Areas of application: Replaceable cassettes enable processing of a variety of different ... Lieske Part No.: 462251 Mfg Part No: 61735805 Type: EASY STRIP 2 INKL. V

118,28 EUR plus delivery charges Delivery time on requestinfo_outline

U.I. Lapp 61735810 LAPP STRIPPER TOOL DATA STRIP stripping/stripping tool Stripping tool STRIPPING TOOL DATA STRIP, stripping tool, cable diameter: 2.5mm - 11.0mm, , Areas of application: Not suitable for PUR materials, Precision stripping tool for stripping signal, ... Lieske Part No.: 177309 Mfg Part No: 61735810 Type: ABMANTELWERKZEUG DAT

46,36 EUR plus delivery charges Delivery time on requestinfo_outline

U.I. Lapp 61735811 LAPP stripping tool DATA STRIP, spare blades Stripping / stripping tool Replacement blade STRIPPING TOOL DATA STRIP SPARE BLADE, Replacement blade, , Areas of application: Not suitable for PUR materials,Precision stripping tool for stripping signal, telephone, AV, control ... Lieske Part No.: 437055 Mfg Part No: 61735811 Type: ABMANTELWERKZEUG DAT

-11% 10,52 EUR 11,84 EUR plus delivery charges Delivery time on requestinfo_outline

U.I. Lapp 61735820 LAPP STRIPPER TOOL STAR STRIP stripping/stripping tool Stripping tool STRIPPING TOOL STAR STRIP, stripping tool, cable diameter: 4.5mm - 40mm, , Areas of application: Continuously adjustable stripping tool for round cables made of various insulation ... Lieske Part No.: 873796 Mfg Part No: 61735820 Type: STAR STRIP

85,54 EUR plus delivery charges Delivery time on requestinfo_outline

U.I. Lapp 61735821 LAPP STAR STRIP stripping tool, replacement blade Stripping / stripping tool Replacement blade STAR STRIP SPARE BLADE, Replacement blade, , Areas of application: Continuously adjustable stripping tool for round cables made of a wide variety of insulation materials (such as ... Lieske Part No.: 440907 Mfg Part No: 61735821 Type: ABMANTELWERKZEUG STA

35,70 EUR plus delivery charges Delivery time on requestinfo_outline