Softing IT Networks WX_AD_TERACHKIT2 TERA Channel measurement adapter - Class FA / Category 7A (1 pair). content_copy

The TERA Channel test adapter from Softing IT Networks, type WX_AD_TERACHKIT2, is a specialised adapter for testing network cable channels according to the classification FA/Kat. 7A. It serves as an interface for testing channels of class F/FA and enables precise measurement of cable parameters during installation. The adapter is designed for use in professional network installations, particularly in environments requiring high data rates and stable signal transmission, such as office buildings, data centres or industrial facilities.

Applications

The test adapter is primarily used in the field of network infrastructure to verify the quality of installed cable channels in accordance with standards for class FA/Kat. 7A. It is suitable for testing cables designed for frequencies up to 600 MHz and serves to validate the performance of structured cabling systems. The application typically occurs during the installation or maintenance of Ethernet networks, especially in environments requiring high bandwidth and low signal distortion.

Functions and Equipment in Detail

The adapter features a special interface enabling testing of channels in class F/FA. This class includes the highest requirements for cable channel performance, particularly in terms of frequency bandwidth and signal integrity. The adapter is designed as a 1-pair adapter, meaning it is intended for testing a single cable channel. It is supplied together with a 2-metre test cable specifically intended for so-called field calibration. This calibration is performed directly at the installation site to ensure measurement accuracy under real-world conditions.

Technology Explained Simply

The function of the TERA Channel test adapter is based on precise measurement of electrical parameters such as impedance, attenuation, NEXT (Near-End Crosstalk) and Return Loss. These values are critical for evaluating cable quality and ensuring compliance with the requirements of standards for class FA/Kat. 7A. The integrated interface allows direct connection to network test devices that evaluate and document the measurement results. The included 2-metre test cable serves as a reference cable for field calibration, minimising measurement deviations caused by external influences such as temperature or mechanical stress.

Compatibility and Accessories

The adapter is specifically developed for testing channels of class FA/Kat. 7A and requires use with suitable network test devices that support the corresponding measurement functions. The included 2-metre test cable is intended as an accessory for field calibration and serves as a reference for calibrating the measurement system on-site.

Mounting and Installation

Installation is performed by directly connecting the adapter to the end of the cable to be tested. No additional tools or special mounting procedures are required. The adapter is connected to the cable, and the test device performs the measurement. Field calibration is carried out by connecting the included 2-metre test cable to the test device and the adapter, thereby calibrating the measurement system before the actual channel test begins.

Advantages in Operation

Using the TERA Channel test adapter ensures precise and reliable testing of network cable channels in accordance with the strict requirements of class FA/Kat. 7A. The integrated interface and the included test cable for field calibration increase measurement accuracy and reduce error sources that could arise from environmental conditions. The simple handling and direct compatibility with standard test devices facilitate use in professional environments and ensure efficient testing of cabling quality.

General
Number of pairs	1

---