Softing IT Networks WX_AD_6APL_PLUS_KIT1,228281 Softing, accessory: calibration artifact for Permanent Link measurement adapter CAT6A PLUS - Class EA/Cat. 6A (1 piece)
|
33,04 EUR 33,15 EUR |
|
|
( 39,32 EUR incl. VAT ) ≈ £27.62 | ≈ $36.31 plus delivery charges: 55,00 € |
|
| Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline | |
| Lieske Part No.: | 1157819 |
|---|---|
| Mfg Part No: | WX AD 6APL PLUS KIT1,228281 |
| UPC/EAN: | 0046382254662 |
| Weight: | 0.2 kg |
| Type: | WX_AD_6APL_PLUS_KIT2 |
Product information for Softing IT Networks WX_AD_6APL_PLUS_KIT1,228281:
Applications
This calibration artifact is used in the field of network infrastructure, particularly during the installation and maintenance of structured cabling systems in high-speed environments. It is intended for use with Permanent-Link measurement adapters from the CAT6A PLUS series, which are specified for testing cabling in accordance with ISO/IEC 11801 and EN 50173-5. The application takes place on-site to calibrate the zero points of the measuring devices before the actual cabling test begins. This ensures that the measured values reflect the actual properties of the cabling and are not distorted by device deviations.
Functions and Equipment in Detail
The kit includes an attenuation measurement device used to determine signal attenuation in cables. Additionally, a Quad light source is integrated, covering wavelengths for multimode and single-mode fibers: 850 nm and 1300 nm for multimode fibers (MM), and 1310 nm and 1550 nm for single-mode fibers (SM). These light sources are required to precisely measure the optical properties of fiber cables. The device is powered and connected to the host computer via a USB cable, enabling data transmission and charging. The delivery also includes a carrying case for safe storage and transport, as well as a quick start guide for operation.
Technology Explained Simply
The function of the calibration artifact is based on simulating a known, calibrated reference signal. During calibration, the measuring device is connected to the artifact, and the measurement values are set to zero to ensure that all subsequent measurements are based on a uniform zero point. The Quad light source enables testing of fiber cables at the most important wavelengths used in modern networks. The USB connection ensures easy integration into existing testing environments, as it simultaneously handles data transmission and power supply. The carrying case protects the device from mechanical damage and facilitates transport to various application sites.
Compatibility and Accessories
The calibration artifact is specifically developed for Permanent-Link measurement adapters CAT6A PLUS and must be used with these devices to perform calibration. It is not intended for other measurement adapters or cable categories. The use is in conjunction with testing cabling in accordance with the standards for Category 6A. It is important to note that the kit does not include any test cables.
Installation and Mounting
The installation of the calibration artifact is performed by connecting it to the Permanent-Link measurement adapter. Calibration is carried out before the actual measurement by connecting the device to the artifact and setting the zero points for electrical and optical measurements. Operation is guided by the included quick start guide, which describes the necessary steps. No additional tools or mounting procedures are required.
Operational Advantages
The use of the calibration artifact ensures high measurement accuracy and reproducibility of results. This is crucial to demonstrate the quality of the installed cabling and to document compliance with applicable standards. The integrated Quad light source enables testing of different fiber types within a single device, increasing the efficiency of testing processes. The USB connection simplifies operation and reduces the number of required cables. The carrying case ensures safe transport and protects the device from damage.
| General | |
| Calibration artefact | for Permanent-Link test adapter CAT6A PLUS |
| Cable category | CAT6A PLUS |
| Class | EA |
| Function | Field zero adjustment |
| Attenuation meter | 1x |
| Light source | Quad |
| Wavelengths | MM 850, 1300nm; SM 1310, 1550nm |
| USB cable | for data and charging |
| Carry bag | 1x |
| Quick start guide | 1x |
| Test lead | not included |
Questions & answers
What is the delivery time of Softing IT Networks WX_AD_6APL_PLUS_KIT1,228281 Softing, accessory: calibration artifact for Permanent Link measurement adapter CAT6A PLUS - Class EA/Cat. 6A (1 piece)?
The article Softing IT Networks WX_AD_6APL_PLUS_KIT1,228281 Softing, accessory: calibration artifact for Permanent Link measurement adapter CAT6A PLUS - Class EA/Cat. 6A (1 piece) is currently in stock
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Softing IT Networks WX_AD_6APL_PLUS_KIT1,228281 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Softing IT Networks WX_AD_6APL_PLUS_KIT1,228281 Softing, accessory: calibration artifact for Permanent Link measurement adapter CAT6A PLUS - Class EA/Cat. 6A (1 piece) always at the best possible price. We can give you a discount of 2% on Softing IT Networks WX_AD_6APL_PLUS_KIT1,228281 Softing, accessory: calibration artifact for Permanent Link measurement adapter CAT6A PLUS - Class EA/Cat. 6A (1 piece) if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.



