Softing IT Networks WX_AC_LCLC_SM_CORD1,228309 Softing WireXpert accessory: singlemode test cable 2 m simplex LC/PC-LC/PC with black strain relief
|
74,24 EUR 74,47 EUR |
|
|
( 88,35 EUR incl. VAT ) ≈ £62.06 | ≈ $81.59 plus delivery charges: 55,00 € |
|
| Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline | |
| Lieske Part No.: | 1929137 |
|---|---|
| Mfg Part No: | WX AC LCLC SM CORD1,228309 |
| UPC/EAN: | 0046382254365 |
| Weight: | 0.2 kg |
| Type: | WX_AC_LCLC_SM_CORD1 |
Product information for Softing IT Networks WX_AC_LCLC_SM_CORD1,228309:
Singlemode test cable is the central product type designed for light signal transmission over fiber optic cables using single-mode technology. Unlike multimode cables, which transmit multiple light modes simultaneously, a singlemode cable uses only one light mode, resulting in lower attenuation and higher bandwidth. This makes it particularly suitable for long transmission distances and highly precise measurement tasks, such as those encountered in network configuration, fault diagnosis, or quality control of fiber optic installations.
LC/PC connectors are the connection couplings used, ensuring a precise and secure optical connection. The designation LC stands for Lucent Connector, a compact, standardized connector commonly used in modern network infrastructures. The abbreviation PC refers to Physical Contact, a polishing method that ensures a smooth, flat surface on the fiber end face, thereby minimizing reflections and signal loss. The LC/PC-LC/PC combination enables a symmetrical and reliable connection between two devices or measurement points.
Simplex describes the cable configuration, where only one fiber strand (one fiber) is used for data transmission. This contrasts with duplex cables, which feature two fibers for bidirectional transmission. Simplex cables are typically intended for applications where data transmission occurs in one direction only, for example, when connecting a test device to a network device that performs only reception or only transmission.
Reference quality denotes the high precision and consistency of the optical properties of the cable. Such cables are used in measurement technology as a reference standard to minimize measurement deviations and ensure result accuracy. Reference quality is particularly important when the cable is used in calibration processes or for determining attenuation values in fiber optic links.
Black strain relief sleeve is a mechanical protection that shields the cable from bending and compression stresses, especially in areas where the cable is bent or secured. This protection prevents microcracks in the fiber and contributes to long-term stability and reliability of the cable. The strain relief sleeve is permanently attached to the cable and ensures even distribution of mechanical stress.
The cable is designed for use in professional environments, particularly in IT infrastructure, during the installation and maintenance of fiber optic networks, and in industrial measurement technology. It is suitable for applications requiring high optical quality and mechanical robustness. Typical uses include fault diagnosis, network configuration, or quality control of fiber optic installations. The 2-meter length provides sufficient flexibility for use in standard network setups without creating unnecessarily long connections.
Installation is performed by simply plugging the LC connectors into the corresponding sockets of the devices. No additional tools or special installation methods are required. The connectors are designed to ensure a secure and tight connection, while the strain relief zone protects the cable from mechanical damage. The connection can be quickly established and, if needed, disconnected without tools.
In operation, the cable offers high reliability and reproducible measurement results. The reference quality ensures that optical properties remain stable over time, which is crucial for repeatable and comparable measurements. The use of singlemode technology enables high bandwidth and low attenuation, which is particularly advantageous for long distances. The strain relief sleeve increases the cable's service life and reduces the likelihood of faults caused by mechanical damage.
| General | |
| Cable type | Single mode |
| Plug connection | LC/PC-LC/PC |
| Model | simplex |
| Quality | reference quality |
| Bend protection | Black |
Questions & answers
What is the delivery time of Softing IT Networks WX_AC_LCLC_SM_CORD1,228309 Softing WireXpert accessory: singlemode test cable 2 m simplex LC/PC-LC/PC with black strain relief?
The article Softing IT Networks WX_AC_LCLC_SM_CORD1,228309 Softing WireXpert accessory: singlemode test cable 2 m simplex LC/PC-LC/PC with black strain relief is currently in stock
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Softing IT Networks WX_AC_LCLC_SM_CORD1,228309 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Softing IT Networks WX_AC_LCLC_SM_CORD1,228309 Softing WireXpert accessory: singlemode test cable 2 m simplex LC/PC-LC/PC with black strain relief always at the best possible price. We can give you a discount of 2% on Softing IT Networks WX_AC_LCLC_SM_CORD1,228309 Softing WireXpert accessory: singlemode test cable 2 m simplex LC/PC-LC/PC with black strain relief if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

