Softing IT Networks WX_AC_5e_REF_PCORD1,228039 Softing, WireXpert zbh. Cat. 5e reference patch cable (1 piece) content_copy

The Cat. 5e reference patch cable from Softing IT Networks serves as a calibration and reference standard for testing CAT 5e patch cable adapters within network diagnosis and testing procedures. It is specifically designed for use with WireXpert network testers to ensure the accuracy and reliability of measurement results when inspecting patch cables. The cable functions as a reference against which the electrical characteristics and performance of patch cables under test are measured to identify deviations or faults.

Applications

The reference patch cable is used in professional IT and network engineering, particularly for quality control and maintenance of network infrastructures. It enables the validation of patch cable adapters used in network test devices such as the WireXpert, ensuring that measurement results are correct and reproducible. The application occurs in environments requiring precise network analysis, for example during installation, maintenance, or troubleshooting of Ethernet networks.

Functions and Equipment in Detail

The cable is manufactured to CAT 5e standard, enabling a bandwidth of up to 100 MHz and thus suitable for data transmission in the Gigabit Ethernet range. As a reference cable, it serves as a known, calibrated measurement object whose electrical parameters such as impedance, attenuation, and crosstalk are known and constant. This allows the test adapter to compare its measurement values against this reference to evaluate the actual performance of the cable under test. The cable is supplied in a length of 1 meter, ensuring standardization of test conditions.

Technology Explained Simply

The designation Cat. 5e refers to Category 5e according to the standards for twisted-pair cables used for data transmission in local area networks (LAN). This cable category offers improved performance compared to the older Cat. 5 and enables a data rate of 1 Gbit/s over a distance of up to 100 meters. The reference patch cable is therefore a calibrated, standardized cable serving as a benchmark for comparison. Using such a cable ensures that the test device’s measurement results are not influenced by deviations in the test adapter itself, but reflect exclusively the properties of the cable under test.

Compatibility and Accessories

The reference patch cable is specifically developed for use with the patch cable adapters of the WireXpert network tester from Softing IT Networks. It is not a universal cable, but a calibrated device that is only meaningfully used in conjunction with these specific test adapters. It is delivered as a single unit without additional accessories or documentation.

Installation and Mounting

Installation of the reference patch cable involves simply plugging it into the corresponding patch cable adapter of the WireXpert test device. It requires no special mounting or tools. The cable is used directly during the testing process, serving as a reference object to calibrate the measurement parameters of the adapter. Handling is simple and does not require special prior knowledge, as it is a passive, standardized cable.

Operational Advantages

Using the reference patch cable increases the measurement accuracy of network test devices. It enables an objective assessment of patch cable quality, as the measurement results are based on a known, constant standard. This reduces error sources that could arise from inaccurate adapters or uncalibrated test conditions. Compliance with standards such as Cat. 5e ensures that the reference exhibits the same electrical characteristics as a typical patch cable of this category, securing the comparability of results.